Part Revolve/de: Difference between revisions

From FreeCAD Documentation
(Created page with "Dreht das ausgewählte Objekt um eine gegebene Achse. Die folgenden Formtypen sind erlaubt und führen zu den angegebenen Ausgabeformen (#Notes|Siehe Hinweise für Ausnahmen...")
(Created page with "Volumenkörper oder CompSolids sind nicht als Eingabeform erlaubt. Normale Televerbunde sind (momentan) ebenfalls nicht erlaubt. Zukünfte Versionen werden den tatsächlichen...")
Line 25: Line 25:
|}
|}


Volumenkörper oder CompSolids sind nicht als Eingabeform erlaubt. Normale Televerbunde sind (momentan) ebenfalls nicht erlaubt. Zukünfte Versionen werden den tatsächlichen Formtyp von Teileverbunden prüfen.
Solids or compound solids are not allowed as input shapes. Normal compounds
are currently not allowed, too. Future versions will check the actual shape
type of compound objects.


[[Image:Dialog-revolve.png]]
[[Image:Dialog-revolve.png]]

Revision as of 22:38, 6 January 2019

Part Drehen

Menüeintrag
Formteil → Drehen...
Arbeitsbereich
Part, Complete (veraltet)
Standardtastenkürzel
Keiner
Eingeführt in Version
-
Siehe auch
Keiner

Dreht das ausgewählte Objekt um eine gegebene Achse. Die folgenden Formtypen sind erlaubt und führen zu den angegebenen Ausgabeformen (Siehe Hinweise für Ausnahmen):

Input shape Output shape
Vertex Edge
Edge Face
Wire Shell
Face Solid
Shell Compound solid (Compsolid)

Volumenkörper oder CompSolids sind nicht als Eingabeform erlaubt. Normale Televerbunde sind (momentan) ebenfalls nicht erlaubt. Zukünfte Versionen werden den tatsächlichen Formtyp von Teileverbunden prüfen.

The Angle argument specifies how far the object is to be turned. The coordinates move the origin of the axis of revolving, relative to the origin of the coordinate system.

If you select a user defined axis, the numbers define the direction of the revolving axis with respect to the coordinate system: If the Z coordinate is 0 and the Y and X coordinate are non-zero, then the axis will lie in the X-Y-plane. Its angle is such that its tangent is the ratio of the given X and Y coordinates.

Notes

  • If your version of FreeCAD has a check box for Solid in the Revolve dialog, you can make Solids from closed Wires and Edges.
  • If Revolve is performed using an axis that intersects the face to rotate, and you want to create a solid, the result might be invalid. This can happen for various reasons, self-intersection, direction, etc.