Part: ReverseShapes
Part ReverseShapes |
Menu location |
---|
Part → Reverse Shapes |
Workbenches |
Part |
Default shortcut |
None |
Introduced in version |
- |
See also |
None |
Introducere
Flips the normals of all faces of the selected object.
Flips the normals of all faces of the selected object.
Utilizare
- Selectați forma.
- Selectați Part → Reverse shapes din meniul principal.
- O formă inversată este creată ca un nou obiect separat.
- Select shape.
- Go to the menu Part → Reverse shapes.
- A reversed shape is created as a new separate object.
Note
Prin executarea acestei comenzi, FreeCAD inversează(cu susul în jos) normalele tuturor fețetelor formei / solidului.
Puteți verifica prin :
- ascundeți toate celelalte obiecte, cu excepția formei/solidului inversat(ă)
- selectați forma/solidul inversat(ă)
- schimbați tab-ul "iluminarea" în "Vizualizare" din "Două laturi" în "O singură parte"
- forma/solidul va deveni negru → vă uitați la partea din spate a fațetelor
By executing this command, FreeCAD flips the normals of all faces of the shape/solid.
You can verify this by
- Making all other objects but the reversed shape invisible.
- Selecting the reversed shape.
- Change VizualizareLighting from "Two side" to "One side".
- The shape will turn black, meaning that you are now looking at the back of the faces.
Part
- Primitives: Box, Cylinder, Sphere, Cone, Torus, Tube, Create primitives, Shape builder
- Creation and modification: Extrude, Revolve, Mirror, Fillet, Chamfer, Make face from wires, Ruled Surface, Loft, Sweep, Section, Cross sections, 3D Offset, 2D Offset, Thickness, Projection on surface, Attachment
- Boolean: Make compound, Explode Compound, Compound Filter, Boolean, Cut, Fuse, Common, Connect, Embed, Cutout, Boolean fragments, Slice apart, Slice, XOR
- Measure: Measure Linear, Measure Angular, Measure Refresh, Clear All, Toggle All, Toggle 3D, Toggle Delta
User documentation
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web
- Hubs: User hub, Power users hub, Developer hub