Спираль винтовая (Helix)
This documentation is not finished. Please help and contribute documentation.
GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.
See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.
Спираль |
Системное название |
---|
Part Helix |
Расположение в меню |
Деталь → Создать примитивы... → Клин |
Верстаки |
Part, OpenSCAD |
Быстрые клавиши |
Нет |
Представлено в версии |
- |
См. также |
Нет |
Description
A Helix geometric primitive is available from the Create Primitives dialogue in the Part workbench.
A common usage for the Helix is for creating Threads (see Thread for Screw Tutorial) in conjunction with the Part Sweep operation.
Usage
- Switch to the Part Workbench
- The Create Primitives dialogue can be accessed several ways:
- Pressing the File:Part CreatePrimitives.svg CreatePrimitives icon located in the Part toolbar
- Using the Part → Create Primitives → Helix entry in the Part menu
Parameter
Location
|
Options
Properties
Once you have created the helix you have the possibility to edit its parameters.
The parameters in this menu are similar to those described above.
|
- Примитивы: Куб(Параллелограмм), Конус, Цилиндр, Сфера, Тор, Полый цилиндр,Примитивы, Связующие формы
- Создание и правка: Выдавливание, Построение фигуры вращения, Отражение, Скругление, Фаска, Создать плоскость из граней, Ruled Surface, Профиль, Sweep, Section, Cross sections, 3D Offset, 2D Offset, Создать полый объект, Projection on surface, Прикрепление
- Булевы операции: Соединить, Разорвать связь, Compound Filter, Булевы операции, Cut, Fuse, Common, Connect, Embed, Cutout, Boolean fragments, Slice apart, Slice, XOR
- Измерительные: Measure Linear, Measure Angular, Measure Refresh, Clear All, Toggle All, Toggle 3D, Toggle Delta
- Начинающим
- Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
- Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования
- Помощь: Учебники, Видео учебники
- Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web