Díl Šroubovice

From FreeCAD Documentation
Revision as of 19:55, 4 June 2014 by FuzzyBot (talk | contribs) (Updating to match new version of source page)
Jump to: navigation, search

Part Helix.png Díl Šroubovice

Umístění Menu
Díl → Vytváření zákl.geom.tvarů → Šroubovice
Pracovní stoly
Díl, OpenSCAD
Výchozí zástupce
Nikdo
Představen ve verzi
-
Viz také
..



Description

A Helix geometric primitive is available from the Create Primitives dialogue in the Part workbench.

The Create Primitives dialogue can be accessed via the CreatePrimitives icon Part CreatePrimitives.png located in the Part menu or the Part toolbar, in the Part Workbench.

How to use

PartHelixPrimitivesOptions en.png

Parameter

  • Pitch:The pitch corresponds to the space between two consecutive "turns" of the helix measured along the main axis of the helix.
  • Height: The height corresponds to the overall height of the helix measured along the main axis of the helix.
  • Radius: The radius corresponds to the radius of the circle built by the helix by viewing the helix from the top / bottom.
  • Angle: Per default the helix is built on a imaginary cylinder. With this option it is possible to build the helix on a imaginay conus. This angle corresponds to the angle of the conus. The value must be comprised between -90 deg and +90 deg.
  • Right-handed or Left-handed: This parameter specifies the handedness of the helix.

Location

  • X: The main axis of the helix will be translated along the x axis of the value you indicate in this field.
  • Y: The main axis of the helix will be translated along the y axis of the value you indicate in this field.
  • Z: The main axis of the helix will be translated along the z axis of the value you indicate in this field.
  • Direction: Per default the main axis of the helix is the z axis. Here you have the possibility to edit the main axis of the helix. If you select the parameter "user defined..." , you will be invited to indicate the main axis of the helix by entering the coordinates of its vector.
  • 3D View: allows you select center in the 3D view

Options

Vlastnosti

Když jste šroubovici vytvořili, máte ještě možnost upravit její parametry.

PartHelixProperty it.png

Parametry v tomto menu jsou podobné těm, které jsou popsány výše.

Základ

  • Umístění: umožňuje posunovat nebo otáčet šroubovicí
  • Úhel:
Other languages:
čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎română • ‎русский