# Díl Šroubovice

Díl Šroubovice

Díl → Vytváření zákl.geom.tvarů → Šroubovice
Pracovní stoly
Výchozí zástupce
Nikdo
Představen ve verzi
-
Viz také
..

## Popis

Na této stránce je vysvětleno jak editovat základní parametry šroubovice. Kliknete na ikonu Základní geometrické tvary a na ikonu šroubovice v rozbalovacím menu pro editování parametrů vytvářené šroubovice. Když jse nastavili všechny parametry, kliknete na tlačítko "Vytvořit" pro vykraeslení šroubovice. Once you have edited all the parameters click the button "create" to draw the helix.

## How to use

#### Parameter

• Pitch:The pitch corresponds to the space between two consecutive "turns" of the helix measured along the main axis of the helix.
• Height: The height corresponds to the overall height of the helix measured along the main axis of the helix.
• Radius: The radius corresponds to the radius of the circle built by the helix by viewing the helix from the top / bottom.
• Angle: Per default the helix is built on a imaginary cylinder. With this option it is possible to build the helix on a imaginay conus. This angle corresponds to the angle of the conus. The value must be comprised between -90 deg and +90 deg.
• Right-handed or Left-handed: This parameter specifies the handedness of the helix.

#### Location

• X: The main axis of the helix will be translated along the x axis of the value you indicate in this field.
• Y: The main axis of the helix will be translated along the y axis of the value you indicate in this field.
• Z: The main axis of the helix will be translated along the z axis of the value you indicate in this field.
• Direction: Per default the main axis of the helix is the z axis. Here you have the possibility to edit the main axis of the helix. If you select the parameter "user defined..." , you will be invited to indicate the main axis of the helix by entering the coordinates of its vector.
• 3D View: allows you select center in the 3D view

## Options

### Properties

Once you have created the helix you have the possibility to edit its parameters.

 The parameters in this menu are similar to those described above. Base Placement: allows you to move or rotate the helix Angle:
Other languages:
čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎română • ‎русский