Díl Šroubovice

From FreeCAD Documentation
Revision as of 21:30, 1 May 2014 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Díl Šroubovice

Umístění Menu
Díl → Vytváření zákl.geom.tvarů → Šroubovice
Pracovní stoly
Díl, OpenSCAD
Výchozí zástupce
Nikdo
Představen ve verzi
-
Viz také
..


Základní geometrické tvary

Šroubovice

Parametr

  • Stoupání
  • Výška
  • Poloměr
  • Úhel
  • Levotočivá nebo pravotočivá

Umístění

How to use

Parameter

  • Pitch:The pitch corresponds to the space between two consecutive "turns" of the helix measured along the main axis of the helix.
  • Height: The height corresponds to the overall height of the helix measured along the main axis of the helix.
  • Radius: The radius corresponds to the radius of the circle built by the helix by viewing the helix from the top / bottom.
  • Angle: Per default the helix is built on a imaginary cylinder. With this option it is possible to build the helix on a imaginay conus. This angle corresponds to the angle of the conus. The value must be comprised between -90 deg and +90 deg.
  • Right-handed or Left-handed: This parameter specifies the handedness of the helix.

Location

  • X: The main axis of the helix will be translated along the x axis of the value you indicate in this field.
  • Y: The main axis of the helix will be translated along the y axis of the value you indicate in this field.
  • Z: The main axis of the helix will be translated along the z axis of the value you indicate in this field.
  • Direction: Per default the main axis of the helix is the z axis. Here you have the possibility to edit the main axis of the helix. If you select the parameter "user defined..." , you will be invited to indicate the main axis of the helix by entering the coordinates of its vector.
  • 3D View: ?

Options

Vlastnosti

Pohled

..

Data

Základ

  • DatiOznačení:
  • DatiUmístění:

Souřadnice ...

  • DatiMístní souřadnice:

Šroubovice

  • DatiÚhel :
  • DatiVýška :
  • DatiStoupání :
  • DatiPoloměr :

Base
Placement

  • Angle: The helix will be rotated around the main axis of the helix of the value in deg you enter.

|}

Scripting