Part Fillet

From FreeCAD Documentation
Revision as of 19:39, 1 March 2014 by Renatorivo (talk | contribs) (Created page with "{{GuiCommand/es|Name=Part Fillet|MenuLocation=Pieza -> Redondeo|Workbenches=Pieza,Completo|SeeAlso=Chaflán}}")

Part Fillet

Ubicación en el Menú
Pieza -> Redondeo
Entornos de trabajo
Pieza,Completo
Atajo de teclado por defecto
Ninguno
Introducido en versión
-
Ver también
Chaflán

Description

This tool creates a fillet (round) on the selected edges of an object. A dialog allows you to choose which objects and which edges to work on.

Usage

  • Start the tool from the Part toolbar or from the menu. You can either select the object before or after starting the tool.
  • If the shape was not selected prior to starting the tool, select it in the Shape drop down list in the TaskPanel.
  • Select the fillet type, either constant radius (default) or variable radius.
  • Select the edges either in the 3D model view, or by ticking them in the edge list in TaskPanel.
  • Set the radius value.
  • Click OK to validate.


Part Fillet VS. PartDesign Fillet

There is another fillet tool in the PartDesign workbench. Please note that their operation is quite different. Check out the PartDesign Fillet reference page for more details on their differences.