Part Cylinder
|
|
| Menyplacering |
|---|
| Ingen |
| Arbetsbänkar |
| Del,Komplett |
| Standard genväg |
| Ingen |
| Introducerad i version |
| - |
| Se även |
| Ingen |
Skapar en enkel parametrisk cylinder, med parametrarna position, vinkel, radie och höjd.
The default is for a full cylinder to be positioned, the centre of one circular face coincident with the global origin (point 0,0,0), with a radius of 2mm and height of 10mm.
The properties can later be edited in the data tab for the cylinder:
The angle parameter permits the creation of a portion of cylinder (it is set to 360° by default).
The height is the distance in the z-axis.
The radius defines a plane in x-y.
