Part Cylinder: Difference between revisions
FreeMaxCar (talk | contribs) No edit summary |
FreeMaxCar (talk | contribs) No edit summary |
||
| Line 8: | Line 8: | ||
== How to use == <!--T:2--> |
== How to use == <!--T:2--> |
||
The default is for a full cylinder to be positioned, the centre of one circular face coincident with the global origin (point 0,0,0), with a radius of 2mm and height of 10mm. |
In the workbench [[Part_Workbench|Part]] click on the cube icon [[Image:Part_Cylinder.png|32px]]. A cube with standard dimension and position will be created. The default is for a full cylinder to be positioned, the centre of one circular face coincident with the global origin (point 0,0,0), with a radius of 2mm and height of 10mm. |
||
== Option == <!--T:2--> |
== Option == <!--T:2--> |
||
Revision as of 06:57, 19 June 2014
|
|
| Menu location |
|---|
| Part -> Cylinder |
| Workbenches |
| Part_Module,Complete |
| Default shortcut |
| None |
| Introduced in version |
| - |
| See also |
| Part_CreatePrimitives |
Description
Creates a simple parametric cylinder, with position, angle, radius and height parameters.
How to use
In the workbench Part click on the cube icon 
. A cube with standard dimension and position will be created. The default is for a full cylinder to be positioned, the centre of one circular face coincident with the global origin (point 0,0,0), with a radius of 2mm and height of 10mm.
Option
The properties can later be edited in the data tab for the cylinder:
The angle parameter permits the creation of a portion of cylinder (it is set to 360° by default).
The height is the distance in the z-axis.
The radius defines a plane in x-y.
