Part Cylinder: Difference between revisions
Emagdalena (talk | contribs) m (Languages in alphabetic order) |
(improved definition) |
||
Line 1: | Line 1: | ||
{{GuiCommand|Name=Part_Cylinder|Workbenches=Part,Complete}} |
{{GuiCommand|Name=Part_Cylinder|Workbenches=Part,Complete}} |
||
Creates a simple parametric cylinder, with position, angle, radius and height parameters |
Creates a simple parametric cylinder, with position, angle, radius and height parameters. |
||
The default is for a full cylinder to be positioned, the centre of one circular face coincident with the global origin (point 0,0,0), with a radius of 2mm and height of 10mm. |
|||
The properties can later be edited in the data tab for the cylinder: |
|||
The angle parameter permits the creation of a portion of cylinder (it is set to 360° by default). |
|||
The height is the distance in the z-axis. |
|||
The radius defines a plane in x-y. |
|||
{{languages | {{es|Part Cylinder/es}} {{fr|Part Cylinder/fr}} {{it|Part Cylinder/it}} {{se|Part Cylinder/se}} }} |
{{languages | {{es|Part Cylinder/es}} {{fr|Part Cylinder/fr}} {{it|Part Cylinder/it}} {{se|Part Cylinder/se}} }} |
Revision as of 21:55, 8 April 2012
Part_Cylinder |
Menu location |
---|
None |
Workbenches |
Part,Complete |
Default shortcut |
None |
Introduced in version |
- |
See also |
None |
Creates a simple parametric cylinder, with position, angle, radius and height parameters.
The default is for a full cylinder to be positioned, the centre of one circular face coincident with the global origin (point 0,0,0), with a radius of 2mm and height of 10mm.
The properties can later be edited in the data tab for the cylinder:
The angle parameter permits the creation of a portion of cylinder (it is set to 360° by default).
The height is the distance in the z-axis.
The radius defines a plane in x-y.