Part Cone/sv: Difference between revisions
Renatorivo (talk | contribs) No edit summary |
Renatorivo (talk | contribs) No edit summary |
||
Line 1: | Line 1: | ||
{{GuiCommand/sv|Name=Part_Cone|Name/sv=Part Cone|Workbenches=[[Part_Module/sv|Part]], Complete|SeeAlso=[[Part_CreatePrimitives/sv|Part CreatePrimitives]]}} |
{{GuiCommand/sv|Name=Part_Cone|Name/sv=Part Cone|MenuLocation=Part -> Cone|Workbenches=[[Part_Module/sv|Part]], Complete|SeeAlso=[[Part_CreatePrimitives/sv|Part CreatePrimitives]]}} |
||
== Description == |
== Description == |
Revision as of 13:13, 26 May 2014
Part Cone |
Menyplacering |
---|
Part -> Cone |
Arbetsbänkar |
Part, Complete |
Standard genväg |
Ingen |
Introducerad i version |
- |
Se även |
Part CreatePrimitives |
Description
A parametric truncated Part Cone primitive is available in the Part workbench from the Part tool bar, Part menu (primitives sub-menu) and the Create Primitives dialogue.
The default values create a truncated parametric cone, defined by radius1, radius2 height and angle, parameters. The default cone will be positioned at origin (point 0,0,0) on creation. The angle parameter permits the creation of a portion of cone (it is set to 360° by default), and the radius 1 and 2 correspond to base and top radius of the truncated cone.
Parameters
- Radius 1 - radius of the arc or circle defining the lower face
- Radius 2 - radius of the arc or circle defining the upper face
- Height - the height of the Part Cone
- Angle - the number of degrees of the arc or circles defining the upper and lower faces of the truncated cone. The default 360 creates circular faces, a lower value will create a portion of a cone as defined by upper and lower faces each with edges defined by an arc of the number of degrees and two radii.
The image below shows a Part Cone with the parameter "Angle" set to 270 degrees and all other parameters are at their default values.