Part Cone/ru: Difference between revisions
Renatorivo (talk | contribs) (Created page with "Part Cone") |
Renatorivo (talk | contribs) (Created page with "{{GuiCommand/ru|Name=Part Cone|Name/ru=Part Cone|MenuLocation=Part -> Cone||Workbenches=Part, Complete|SeeAlso=[[Part_CreatePrimitives/ru|Part CreatePrimiti...") |
||
Line 1: | Line 1: | ||
{{GuiCommand|Name=Part Cone|MenuLocation=Part -> Cone||Workbenches=[[Part_Module|Part]], Complete|SeeAlso=[[Part_CreatePrimitives|Part CreatePrimitives]]}} |
{{GuiCommand/ru|Name=Part Cone|Name/ru=Part Cone|MenuLocation=Part -> Cone||Workbenches=[[Part_Module/ru|Part]], Complete|SeeAlso=[[Part_CreatePrimitives/ru|Part CreatePrimitives]]}} |
||
== Description == |
== Description == |
Revision as of 22:07, 10 July 2014
Part Cone |
Системное название |
---|
Part Cone |
Расположение в меню |
Part -> Cone |
Верстаки |
Part, Complete |
Быстрые клавиши |
Нет |
Представлено в версии |
- |
См. также |
Part CreatePrimitives |
Description
A parametric truncated Part Cone primitive is available in the Part workbench from the Part tool bar, Part menu (primitives sub-menu) and the Create Primitives dialogue.
How to use
In the workbench Part click on the cone icon .
The default values create a truncated parametric cone, defined by radius1, radius2 height and angle, parameters. The default cone will be positioned at origin (point 0,0,0) on creation. The angle parameter permits the creation of a portion of cone (it is set to 360° by default), and the radius 1 and 2 correspond to base and top radius of the truncated cone.
Options
The image below shows a Part Cone with the parameter "Angle" set to 270 degrees and all other parameters are at their default values.