Part Cone/fr

Cône
Emplacement du menu
Paramétrique → Cône
Ateliers
Atelier Pièce, Complet
Raccourci par défaut
Aucun
Introduit dans la version
-
Voir aussi
Part CreatePrimitives

Description

Un cône paramétrique tronqué est une primitive disponible sur la barre d'outils Part, ou dans le menu (primitives sub-menu) une boite de dialogue primitives géométriques est ouverte.

Utilisation

Dans l'atelier part, cliquez sur l'icône cône .

The default values create a truncated parametric cone, defined by radius1, radius2 height and angle, parameters. The default cone will be positioned at origin (point 0,0,0) on creation. The angle parameter permits the creation of a portion of cone (it is set to 360° by default), and the radius 1 and 2 correspond to base and top radius of the truncated cone.

Options

Cone Radius 1 - radius of the arc or circle defining the lower face Radius 2 - radius of the arc or circle defining the upper face Height - the height of the Part Cone Angle - the number of degrees of the arc or circles defining the upper and lower faces of the truncated cone. The default 360 creates circular faces, a lower value will create a portion of a cone as defined by upper and lower faces each with edges defined by an arc of the number of degrees and two radii.

The image below shows a Part Cone with the parameter "Angle" set to 270 degrees and all other parameters are at their default values.