Part Cone/cs: Difference between revisions

From FreeCAD Documentation
No edit summary
(Updating to match new version of source page)
Line 18: Line 18:
*Height - the height of the Part Cone
*Height - the height of the Part Cone
*Angle - the number of degrees of the arc or circles defining the upper and lower faces of the truncated cone. The default 360 creates circular faces, a lower value will create a portion of a cone as defined by upper and lower faces each with edges defined by an arc of the number of degrees and two radii.
*Angle - the number of degrees of the arc or circles defining the upper and lower faces of the truncated cone. The default 360 creates circular faces, a lower value will create a portion of a cone as defined by upper and lower faces each with edges defined by an arc of the number of degrees and two radii.

|}
|}



Revision as of 20:31, 12 September 2014

Díl Kužel

Umístění Menu
Díl -> Kužel
Pracovní stoly
Díl, Kompletace
Výchozí zástupce
Nikdo
Představen ve verzi
-
Viz také
Díl Vytváření zákl.geom.tvarů

Popis

Parametricky zkrácený díl Kužel je dostupný v pracovní ploše Díl z nástrojového pruhu Díl, Menu Díl (submenu zákl.geom.tvary) a dialogové okno Vytváření zákl.geom.tvarů.

Použití

V pracovní ploše Díl klikněte na ikonu kuželu .

Defaultní hodnoty vytvoří komolý parametrický kužel definovaný poloměrem 1, poloměrem 2, výškou a úhlem. Defaultní kužel bude při vytvoření pozicován na počáteční bod (bod 0,0,0). Parametr úhel umožňuje vytváření částečného kuželu (defaultně je nastavený na 360°) a poloměry 1 a 2 korespondují se základnou a vrchní plochou komolého kuželu.

Options

Cone

  • Radius 1 - radius of the arc or circle defining the lower face
  • Radius 2 - radius of the arc or circle defining the upper face
  • Height - the height of the Part Cone
  • Angle - the number of degrees of the arc or circles defining the upper and lower faces of the truncated cone. The default 360 creates circular faces, a lower value will create a portion of a cone as defined by upper and lower faces each with edges defined by an arc of the number of degrees and two radii.


Na obrázku níže je zobrazen díl Kužel s parametrem "úhel" nastaveným na 270 stupňů a ostatní parametry zůstávají nastaveny defaultně.