Part Cone: Difference between revisions
FreeMaxCar (talk | contribs) No edit summary |
FreeMaxCar (talk | contribs) No edit summary |
||
Line 12: | Line 12: | ||
== Options == <!--T:2--> |
== Options == <!--T:2--> |
||
{| |
|||
[[File:PartConeProperty_en.png]] |
[[File:PartConeProperty_en.png]] |
||
| |
|||
*Radius 1 - radius of the arc or circle defining the lower face |
| *Radius 1 - radius of the arc or circle defining the lower face |
||
*Radius 2 - radius of the arc or circle defining the upper face |
*Radius 2 - radius of the arc or circle defining the upper face |
||
*Height - the height of the Part Cone |
*Height - the height of the Part Cone |
||
*Angle - the number of degrees of the arc or circles defining the upper and lower faces of the truncated cone. The default 360 creates circular faces, a lower value will create a portion of a cone as defined by upper and lower faces each with edges defined by an arc of the number of degrees and two radii. |
*Angle - the number of degrees of the arc or circles defining the upper and lower faces of the truncated cone. The default 360 creates circular faces, a lower value will create a portion of a cone as defined by upper and lower faces each with edges defined by an arc of the number of degrees and two radii. |
||
|} |
|||
Revision as of 09:03, 20 June 2014
Part Cone |
Menu location |
---|
Part -> Cone |
Workbenches |
Part, Complete |
Default shortcut |
None |
Introduced in version |
- |
See also |
Part CreatePrimitives |
Description
A parametric truncated Part Cone primitive is available in the Part workbench from the Part tool bar, Part menu (primitives sub-menu) and the Create Primitives dialogue.
How to use
In the workbench Part click on the cone icon .
The default values create a truncated parametric cone, defined by radius1, radius2 height and angle, parameters. The default cone will be positioned at origin (point 0,0,0) on creation. The angle parameter permits the creation of a portion of cone (it is set to 360° by default), and the radius 1 and 2 correspond to base and top radius of the truncated cone.
Options
*Radius 1 - radius of the arc or circle defining the lower face
|
The image below shows a Part Cone with the parameter "Angle" set to 270 degrees and all other parameters are at their default values.