Part Cone: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
Line 13: Line 13:
The default values create a truncated parametric cone, defined by radius1, radius2 height and angle, parameters. The default cone will be positioned at origin (point 0,0,0) on creation. The angle parameter permits the creation of a portion of cone (it is set to 360° by default), and the radius 1 and 2 correspond to base and top radius of the truncated cone.
The default values create a truncated parametric cone, defined by radius1, radius2 height and angle, parameters. The default cone will be positioned at origin (point 0,0,0) on creation. The angle parameter permits the creation of a portion of cone (it is set to 360° by default), and the radius 1 and 2 correspond to base and top radius of the truncated cone.


== Parameters == <!--T:4-->
== Options == <!--T:2-->
*Radius 1 - radius of the arc or circle defining the lower face
*Radius 1 - radius of the arc or circle defining the lower face
*Radius 2 - radius of the arc or circle defining the upper face
*Radius 2 - radius of the arc or circle defining the upper face

Revision as of 08:50, 20 June 2014

Part Cone

Menu location
Part -> Cone
Workbenches
Part, Complete
Default shortcut
None
Introduced in version
-
See also
Part CreatePrimitives

Description

A parametric truncated Part Cone primitive is available in the Part workbench from the Part tool bar, Part menu (primitives sub-menu) and the Create Primitives dialogue.

How to use

In the Workbench Part click on the cone icon .


The default values create a truncated parametric cone, defined by radius1, radius2 height and angle, parameters. The default cone will be positioned at origin (point 0,0,0) on creation. The angle parameter permits the creation of a portion of cone (it is set to 360° by default), and the radius 1 and 2 correspond to base and top radius of the truncated cone.

Options

  • Radius 1 - radius of the arc or circle defining the lower face
  • Radius 2 - radius of the arc or circle defining the upper face
  • Height - the height of the Part Cone
  • Angle - the number of degrees of the arc or circles defining the upper and lower faces of the truncated cone. The default 360 creates circular faces, a lower value will create a portion of a cone as defined by upper and lower faces each with edges defined by an arc of the number of degrees and two radii.


The image below shows a Part Cone with the parameter "Angle" set to 270 degrees and all other parameters are at their default values.