Part: Controlla la geometria

From FreeCAD Documentation
Revision as of 22:26, 25 January 2015 by Renatorivo (talk | contribs)

Controlla geometria‏‎

Posizione nel menu
Part → Controlla geometria
Ambiente
Part
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Nessuno

Introduzione

Lo strumento di controllo della geometria consente di verificare se si dispone di un solido valido

Utilizzo

From the Part or Part Design WB

Tools > Edit Parameters > Preferences > Mod > Part > CheckGeometry then in the right pane double click under Value for the RunBOPCheck parameter and set to true