Part CheckGeometry/it: Difference between revisions
Renatorivo (talk | contribs) No edit summary |
Renatorivo (talk | contribs) (Created page with "Se si desidera attivare i controlli BOP aggiuntivi basta seguire questi passaggi: Strumenti > Modifica parametri > Preferenze > Mod > Part > CheckGeometry quindi nel riquadro...") |
||
Line 12: | Line 12: | ||
==Active extra BOP check== |
==Active extra BOP check== |
||
Se si desidera attivare i controlli BOP aggiuntivi basta seguire questi passaggi: |
|||
If you want to enable the extra BOP checks then follow these steps : |
|||
Strumenti > Modifica parametri > Preferenze > Mod > Part > CheckGeometry |
|||
quindi nel riquadro di destra fare doppio clic sotto Valore per il parametro RunBOPCheck e impostarlo '''true''' poi cliccare su "Salva su disco", chiudere e riavviare. |
|||
then in the right pane double click under Value for the RunBOPCheck parameter and set to true, then click Save to disk, close and restart. |
|||
See the screenshot below. |
|||
Vedere la schermata sottostante. |
|||
If the parameter or folder does not exist, you can create it with a right click. |
If the parameter or folder does not exist, you can create it with a right click. |
Revision as of 20:12, 11 April 2016
Controlla geometria |
Posizione nel menu |
---|
Part → Controlla geometria |
Ambiente |
Part |
Avvio veloce |
Nessuno |
Introdotto nella versione |
- |
Vedere anche |
Nessuno |
Introduzione
Lo strumento di controllo della geometria consente di verificare se si dispone di un solido valido
Utilizzo
The tool is available in the Part workbench under Part menu or with the button in the Boolean toolbar. Select a part (beware to select the whole part and not just a face to check for valid solid) then launch the tool. You will see results in the Task panel.
Active extra BOP check
Se si desidera attivare i controlli BOP aggiuntivi basta seguire questi passaggi: Strumenti > Modifica parametri > Preferenze > Mod > Part > CheckGeometry quindi nel riquadro di destra fare doppio clic sotto Valore per il parametro RunBOPCheck e impostarlo true poi cliccare su "Salva su disco", chiudere e riavviare.
Vedere la schermata sottostante.
If the parameter or folder does not exist, you can create it with a right click.