Part Box

From FreeCAD Documentation
Revision as of 19:42, 21 May 2014 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Part_Box

Menyplacering
Ingen
Arbetsbänkar
Del,Komplett
Standard genväg
Ingen
Introducerad i version
-
Se även
Ingen

Skapar en simpel parametrisk låda, med parametrarna position, höjd, längd och bredd. Lådan kommer att placeras i origo (punkt 0,0,0) när den skapas.

Parameters

The parametric rectangular cuboid is defined by the parameters

  • length,
  • width,
  • height,
  • as well as the standard set of Placement Parameters.

The default is a cube with parameter values for height, length and width being 10mm. The default placement values will locate the cuboid's local origin at the global origin (the location where all axis are 0) and the orientation such that


  • The length is the distance in the x-axis.
  • The width is the distance in the y-axis.
  • The height is the distance in the z-axis.


a box created with the Box tool

FreeCAD - Version

Beginning in FreeCAD version 0.14, a Part Box is referred to in the GUI elements as a Cube and the default label is "Cube".