Part Box

From FreeCAD Documentation
Revision as of 17:26, 20 February 2014 by Renatorivo (talk | contribs) (Created page with "Skapar en simpel parametrisk låda, med parametrarna position, höjd, längd och bredd. Lådan kommer att placeras i origo (punkt 0,0,0) när den skapas.")

Part_Box

Menyplacering
Ingen
Arbetsbänkar
Del,Komplett
Standard genväg
Ingen
Introducerad i version
-
Se även
Ingen

Skapar en simpel parametrisk låda, med parametrarna position, höjd, längd och bredd. Lådan kommer att placeras i origo (punkt 0,0,0) när den skapas.

The default is for a cube of 10mm x 10mm x 10mm to be positioned at the global origin (point 0,0,0) on creation.

The properties can later be edited in the data tab for the box:

The height is the distance in the z-axis.

The length is the distance in the x-axis.

The width is the distance in the y-axis.

a box created with the Box tool