Part Box/sv: Difference between revisions
Renatorivo (talk | contribs) (Created page with "{{GuiCommand/sv|Name=Part_Box|Name/sv=Part_Box|Workbenches=Del,Komplett}}") |
Renatorivo (talk | contribs) (Created page with "Skapar en simpel parametrisk låda, med parametrarna position, höjd, längd och bredd. Lådan kommer att placeras i origo (punkt 0,0,0) när den skapas.") |
||
| Line 1: | Line 1: | ||
{{GuiCommand/sv|Name=Part_Box|Name/sv=Part_Box|Workbenches=Del,Komplett}} |
{{GuiCommand/sv|Name=Part_Box|Name/sv=Part_Box|Workbenches=Del,Komplett}} |
||
Skapar en simpel parametrisk låda, med parametrarna position, höjd, längd och bredd. Lådan kommer att placeras i origo (punkt 0,0,0) när den skapas. |
|||
Creates a simple parametric box, with position, height, length and width parameters. |
|||
The default is for a cube of 10mm x 10mm x 10mm to be positioned at the global origin (point 0,0,0) on creation. |
The default is for a cube of 10mm x 10mm x 10mm to be positioned at the global origin (point 0,0,0) on creation. |
||
Revision as of 17:26, 20 February 2014
|
|
| Menyplacering |
|---|
| Ingen |
| Arbetsbänkar |
| Del,Komplett |
| Standard genväg |
| Ingen |
| Introducerad i version |
| - |
| Se även |
| Ingen |
Skapar en simpel parametrisk låda, med parametrarna position, höjd, längd och bredd. Lådan kommer att placeras i origo (punkt 0,0,0) när den skapas.
The default is for a cube of 10mm x 10mm x 10mm to be positioned at the global origin (point 0,0,0) on creation.
The properties can later be edited in the data tab for the box:
The height is the distance in the z-axis.
The length is the distance in the x-axis.
The width is the distance in the y-axis.
