Part Box/en: Difference between revisions
(Neue Version von externer Quelle importiert) |
(Importing a new version from external source) |
||
| Line 4: | Line 4: | ||
A parametric [http://en.wikipedia.org/wiki/Cuboid#Rectangular_cuboid Rectangular cuboid] primitive is available in the Part workbench from the Part tool bar, Part menu (primitives sub-menu) and the Create Primitives dialogue. Beginning in FreeCAD version 0.14, a Part Box is referred to in the GUI elements as a Cube and the default label is "Cube". |
A parametric [http://en.wikipedia.org/wiki/Cuboid#Rectangular_cuboid Rectangular cuboid] primitive is available in the Part workbench from the Part tool bar, Part menu (primitives sub-menu) and the Create Primitives dialogue. Beginning in FreeCAD version 0.14, a Part Box is referred to in the GUI elements as a Cube and the default label is "Cube". |
||
== Parameters == |
|||
The default is for a cube of 10mm x 10mm x 10mm to be positioned at the global origin (point 0,0,0) on creation. |
|||
The parametric rectangular cuboid is defined by the parameters |
|||
*length, |
|||
*width, |
|||
*height, |
|||
*as well as the standard set of Placement Parameters. |
|||
The default is a cube with parameter values for height, length and width being 10mm. The default placement values will locate the cuboid's local origin at the global origin (the location where all axis are 0) and the orientation such that |
The default is a cube with parameter values for height, length and width being 10mm. The default placement values will locate the cuboid's local origin at the global origin (the location where all axis are 0) and the orientation such that |
||
Revision as of 19:43, 21 May 2014
|
|
| Menu location |
|---|
| Part -> Box |
| Workbenches |
| Part, Complete |
| Default shortcut |
| None |
| Introduced in version |
| - |
| See also |
| Part CreatePrimitives |
Description
A parametric Rectangular cuboid primitive is available in the Part workbench from the Part tool bar, Part menu (primitives sub-menu) and the Create Primitives dialogue. Beginning in FreeCAD version 0.14, a Part Box is referred to in the GUI elements as a Cube and the default label is "Cube".
Parameters
The parametric rectangular cuboid is defined by the parameters
- length,
- width,
- height,
- as well as the standard set of Placement Parameters.
The default is a cube with parameter values for height, length and width being 10mm. The default placement values will locate the cuboid's local origin at the global origin (the location where all axis are 0) and the orientation such that
The length is the distance in the x-axis.
The width is the distance in the y-axis.
The height is the distance in the z-axis.
FreeCAD - Version
Beginning in FreeCAD version 0.14, a Part Box is referred to in the GUI elements as a Cube and the default label is "Cube".