Part Box/en: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Importing a new version from external source)
Line 1: Line 1:
{{GuiCommand|Name=Part_Box|MenuLocation=Part -> Box||Workbenches=[[Part_Module|Part_Module]],Complete|SeeAlso=[[Part_CreatePrimitives|Part_CreatePrimitives]]}}
{{GuiCommand|Name=Part Box|MenuLocation=Part -> Box||Workbenches=[[Part_Module|Part]], Complete|SeeAlso=[[Part_CreatePrimitives|Part CreatePrimitives]]}}


Creates a simple parametric box, with position, height, length and width parameters.
Creates a simple parametric box, with position, height, length and width parameters.

Revision as of 19:42, 21 May 2014

Part Box

Menu location
Part -> Box
Workbenches
Part, Complete
Default shortcut
None
Introduced in version
-
See also
Part CreatePrimitives

Creates a simple parametric box, with position, height, length and width parameters.

The default is for a cube of 10mm x 10mm x 10mm to be positioned at the global origin (point 0,0,0) on creation.

The default is a cube with parameter values for height, length and width being 10mm. The default placement values will locate the cuboid's local origin at the global origin (the location where all axis are 0) and the orientation such that


The length is the distance in the x-axis.

The width is the distance in the y-axis.

The height is the distance in the z-axis.


a box created with the Box tool

FreeCAD - Version

Beginning in FreeCAD version 0.14, a Part Box is referred to in the GUI elements as a Cube and the default label is "Cube".