Difference between revisions of "PartDesign Workbench"

From FreeCAD Documentation
Jump to: navigation, search
(Add link to Fine-tuning)
m (use SVG icon)
 
(10 intermediate revisions by the same user not shown)
Line 39: Line 39:
  
 
<!--T:119-->
 
<!--T:119-->
* [[Image:Std_Part.png|32px]] [[Std Part|Part]]: adds a new Part container in the active document and makes it active.
+
* [[Image:Geofeaturegroup.svg|32px]] [[Std Part|Part]]: adds a new Part container in the active document and makes it active.
 
* [[Image:Group.svg|32px]] [[Std Group|Group]]: adds a Group in the active document's Model tree.
 
* [[Image:Group.svg|32px]] [[Std Group|Group]]: adds a Group in the active document's Model tree.
  
Line 48: Line 48:
  
 
<!--T:43-->
 
<!--T:43-->
*[[File:PartDesign_NewSketch.png|32px]] [[PartDesign_NewSketch|Create sketch]]: creates‎ a new sketch on a selected face or plane. If no face is selected while this tool is executed, the user is prompted to select a plane from the Tasks panel. The interface then switches to the [[Sketcher_Workbench|Sketcher_Workbench]] in sketch editing mode.
+
*[[File:Sketcher_NewSketch.svg|32px]] [[PartDesign_NewSketch|Create sketch]]: creates‎ a new sketch on a selected face or plane. If no face is selected while this tool is executed, the user is prompted to select a plane from the Tasks panel. The interface then switches to the [[Sketcher_Workbench|Sketcher Workbench]] in sketch editing mode.
  
 
<!--T:44-->
 
<!--T:44-->
* [[Image:Sketcher_EditSketch.png|32px]] [[Sketcher_EditSketch|Edit sketch]]: Edit the selected Sketch.
+
* [[File:Sketcher_EditSketch.svg|32px]] [[Sketcher_EditSketch|Edit sketch]]: Edit the selected Sketch.
  
 
<!--T:45-->
 
<!--T:45-->
* [[Image:Sketcher_MapSketch.png‎|32px]] [[Sketcher_MapSketch|Map sketch to face]]: Maps a sketch to a previously selected plane or a face of the active body.
+
* [[File:Sketcher_MapSketch.svg|32px]] [[Sketcher_MapSketch|Map sketch to face]]: Maps a sketch to a previously selected plane or a face of the active body.
  
 
=== Part Design Modeling tools === <!--T:46-->
 
=== Part Design Modeling tools === <!--T:46-->
Line 61: Line 61:
  
 
<!--T:48-->
 
<!--T:48-->
*[[File:PartDesign Point.png|32px]] [[PartDesign Point|Create a datum point]]: creates a datum point in the active body.
+
*[[File:PartDesign Point.svg|32px]] [[PartDesign Point|Create a datum point]]: creates a datum point in the active body.
  
 
<!--T:49-->
 
<!--T:49-->
*[[File:PartDesign Line.png|32px]] [[PartDesign Line|Create a datum line]]: creates a datum line in the active body.
+
*[[File:PartDesign Line.svg|32px]] [[PartDesign Line|Create a datum line]]: creates a datum line in the active body.
  
 
<!--T:50-->
 
<!--T:50-->
*[[File:PartDesign Plane.png|32px]] [[PartDesign Plane|Create a datum plane]]: creates a datum plane in the active body.
+
*[[File:PartDesign Plane.svg|32px]] [[PartDesign Plane|Create a datum plane]]: creates a datum plane in the active body.
  
 
<!--T:120-->
 
<!--T:120-->
*[[File:PartDesign CoordinateSystem.png|32px]] [[PartDesign_CoordinateSystem|Create a local coordinate system]]: creates a local coordinate system attached to datum geometry in the active body.
+
*[[File:PartDesign CoordinateSystem.svg|32px]] [[PartDesign_CoordinateSystem|Create a local coordinate system]]: creates a local coordinate system attached to datum geometry in the active body.
  
 
<!--T:51-->
 
<!--T:51-->
*[[File:PartDesign ShapeBinder.png|32px]] [[PartDesign ShapeBinder|Create a shape binder]]: creates a shape binder in the active body.
+
*[[File:PartDesign ShapeBinder.svg|32px]] [[PartDesign ShapeBinder|Create a shape binder]]: creates a shape binder in the active body.
  
 
<!--T:52-->
 
<!--T:52-->
*[[File:PartDesign Clone.png|32px]] [[PartDesign Clone|Create a clone]]: creates a clone of the selected body.
+
*[[File:PartDesign Clone.svg|32px]] [[PartDesign Clone|Create a clone]]: creates a clone of the selected body.
  
 
==== Additive tools ==== <!--T:53-->
 
==== Additive tools ==== <!--T:53-->
Line 84: Line 84:
  
 
<!--T:55-->
 
<!--T:55-->
* [[File:PartDesign_Pad.png|32px]] [[PartDesign_Pad|Pad]]: extrudes a solid from a selected sketch.
+
* [[File:PartDesign_Pad.svg|32px]] [[PartDesign_Pad|Pad]]: extrudes a solid from a selected sketch.
  
 
<!--T:56-->
 
<!--T:56-->
* [[File:PartDesign_Revolution.png|32px]] [[PartDesign_Revolution|Revolution]]: creates a solid by revolving a sketch around an axis. The sketch must form a closed profile.
+
* [[File:PartDesign_Revolution.svg|32px]] [[PartDesign_Revolution|Revolution]]: creates a solid by revolving a sketch around an axis. The sketch must form a closed profile.
  
 
<!--T:57-->
 
<!--T:57-->
*[[File:PartDesign AdditiveLoft.png|32px]] [[PartDesign AdditiveLoft|Additive loft]]: creates a solid by making a transition between two or more sketches.
+
*[[File:PartDesign Additive_Loft.svg|32px]] [[PartDesign AdditiveLoft|Additive loft]]: creates a solid by making a transition between two or more sketches.
  
 
<!--T:58-->
 
<!--T:58-->
*[[File:PartDesign AdditivePipe.png|32px]] [[PartDesign AdditivePipe|Additive pipe]]: creates a solid by sweeping one or more sketches along an open or closed path.
+
*[[File:PartDesign Additive_Pipe.svg|32px]] [[PartDesign AdditivePipe|Additive pipe]]: creates a solid by sweeping one or more sketches along an open or closed path.
  
 
<!--T:59-->
 
<!--T:59-->
Line 99: Line 99:
  
 
<!--T:60-->
 
<!--T:60-->
:*[[File:PartDesign AdditiveBox.png|32px]] [[PartDesign AdditiveBox|Additive box]]: creates an additive box.
+
:*[[File:PartDesign Additive_Box.svg|32px]] [[PartDesign AdditiveBox|Additive box]]: creates an additive box.
  
 
<!--T:61-->
 
<!--T:61-->
:*[[File:PartDesign AdditiveCone.png|32px]] [[PartDesign AdditiveCone|Additive cone]]: creates an additive cone.
+
:*[[File:PartDesign Additive_Cone.svg|32px]] [[PartDesign AdditiveCone|Additive cone]]: creates an additive cone.
  
 
<!--T:62-->
 
<!--T:62-->
:*[[File:PartDesign AdditiveCylinder.png|32px]] [[PartDesign AdditiveCylinder|Additive cylinder]]: creates an additive cylinder.
+
:*[[File:PartDesign Additive_Cylinder.svg|32px]] [[PartDesign AdditiveCylinder|Additive cylinder]]: creates an additive cylinder.
  
 
<!--T:63-->
 
<!--T:63-->
:*[[File:PartDesign AdditiveEllipsoid.png|32px]] [[PartDesign AdditiveEllipsoid|Additive ellipsoid]]: creates an additive ellipsoid.
+
:*[[File:PartDesign Additive_Ellipsoid.svg|32px]] [[PartDesign AdditiveEllipsoid|Additive ellipsoid]]: creates an additive ellipsoid.
  
 
<!--T:64-->
 
<!--T:64-->
:*[[File:PartDesign AdditivePrism.png|32px]] [[PartDesign AdditivePrism|Additive prism]]: creates an additive prism.
+
:*[[File:PartDesign Additive_Prism.svg|32px]] [[PartDesign AdditivePrism|Additive prism]]: creates an additive prism.
  
 
<!--T:65-->
 
<!--T:65-->
:*[[File:PartDesign AdditiveSphere.png|32px]] [[PartDesign AdditiveSphere|Additive sphere]]: creates an additive sphere.
+
:*[[File:PartDesign Additive_Sphere.svg|32px]] [[PartDesign AdditiveSphere|Additive sphere]]: creates an additive sphere.
  
 
<!--T:66-->
 
<!--T:66-->
:*[[File:PartDesign AdditiveTorus.png|32px]] [[PartDesign AdditiveTorus|Additive torus]]: creates an additive torus.
+
:*[[File:PartDesign Additive_Torus.svg|32px]] [[PartDesign AdditiveTorus|Additive torus]]: creates an additive torus.
  
 
<!--T:67-->
 
<!--T:67-->
:*[[File:PartDesign AdditiveWedge.png|32px]] [[PartDesign AdditiveWedge|Additive wedge]]: creates an additive wedge.
+
:*[[File:PartDesign Additive_Wedge.svg|32px]] [[PartDesign AdditiveWedge|Additive wedge]]: creates an additive wedge.
  
 
==== Subtractive tools ==== <!--T:68-->
 
==== Subtractive tools ==== <!--T:68-->
Line 128: Line 128:
  
 
<!--T:70-->
 
<!--T:70-->
* [[File:PartDesign Pocket.png|32px]] [[PartDesign_Pocket|Pocket]]: creates a pocket from a selected sketch.
+
* [[File:PartDesign Pocket.svg|32px]] [[PartDesign_Pocket|Pocket]]: creates a pocket from a selected sketch.
  
 
<!--T:71-->
 
<!--T:71-->
* [[File:PartDesign Hole.png|32px]] [[PartDesign_Hole|Hole]]: creates a hole feature from a selected sketch. The sketch must contain one or multiple circles.
+
* [[File:PartDesign Hole.svg|32px]] [[PartDesign_Hole|Hole]]: creates a hole feature from a selected sketch. The sketch must contain one or multiple circles.
  
 
<!--T:72-->
 
<!--T:72-->
* [[File:PartDesign Groove.png|32px]] [[PartDesign_Groove|Groove]]: creates a groove by revolving a sketch around an axis.
+
* [[File:PartDesign Groove.svg|32px]] [[PartDesign_Groove|Groove]]: creates a groove by revolving a sketch around an axis.
  
 
<!--T:73-->
 
<!--T:73-->
*[[File:PartDesign SubtractiveLoft.png|32px]] [[PartDesign SubtractiveLoft|Subtractive loft]]: creates a solid shape by making a transition between two or more sketches and subtracts it from the active body.
+
*[[File:PartDesign Subtractive_Loft.svg|32px]] [[PartDesign SubtractiveLoft|Subtractive loft]]: creates a solid shape by making a transition between two or more sketches and subtracts it from the active body.
  
 
<!--T:74-->
 
<!--T:74-->
*[[File:PartDesign SubtractivePipe.png|32px]] [[PartDesign SubtractivePipe|Subtractive pipe]]:  creates a solid shape by sweeping one or more sketches along an open or closed path and subtracts it from the active body.
+
*[[File:PartDesign Subtractive_Pipe.svg|32px]] [[PartDesign SubtractivePipe|Subtractive pipe]]:  creates a solid shape by sweeping one or more sketches along an open or closed path and subtracts it from the active body.
  
 
<!--T:75-->
 
<!--T:75-->
Line 146: Line 146:
  
 
<!--T:76-->
 
<!--T:76-->
:*[[File:PartDesign SubtractiveBox.png|32px]] [[PartDesign SubtractiveBox|Subtractive box]]: adds a subtractive box to the active body.
+
:*[[File:PartDesign Subtractive_Box.svg|32px]] [[PartDesign SubtractiveBox|Subtractive box]]: adds a subtractive box to the active body.
  
 
<!--T:77-->
 
<!--T:77-->
:*[[File:PartDesign SubtractiveCone.png|32px]] [[PartDesign SubtractiveCone|Subtractive cone]]: adds a subtractive cone to the active body.
+
:*[[File:PartDesign Subtractive_Cone.svg|32px]] [[PartDesign SubtractiveCone|Subtractive cone]]: adds a subtractive cone to the active body.
  
 
<!--T:78-->
 
<!--T:78-->
:*[[File:PartDesign SubtractiveCylinder.png|32px]] [[PartDesign SubtractiveCylinder|Subtractive cylinder]]: adds a subtractive cylinder to the active body.
+
:*[[File:PartDesign Subtractive_Cylinder.svg|32px]] [[PartDesign SubtractiveCylinder|Subtractive cylinder]]: adds a subtractive cylinder to the active body.
  
 
<!--T:79-->
 
<!--T:79-->
:*[[File:PartDesign SubtractiveEllipsoid.png|32px]] [[PartDesign SubtractiveEllipsoid|Subtractive ellipsoid]]: adds a subtractive ellipsoid to the active body.
+
:*[[File:PartDesign Subtractive_Ellipsoid.svg|32px]] [[PartDesign SubtractiveEllipsoid|Subtractive ellipsoid]]: adds a subtractive ellipsoid to the active body.
  
 
<!--T:80-->
 
<!--T:80-->
:*[[File:PartDesign SubtractivePrism.png|32px]] [[PartDesign SubtractivePrism|Subtractive prism]]: adds a subtractive prism to the active body.
+
:*[[File:PartDesign Subtractive_Prism.svg|32px]] [[PartDesign SubtractivePrism|Subtractive prism]]: adds a subtractive prism to the active body.
  
 
<!--T:81-->
 
<!--T:81-->
:*[[File:PartDesign SubtractiveSphere.png|32px]] [[PartDesign SubtractiveSphere|Subtractive sphere]]: adds a subtractive sphere to the active body.
+
:*[[File:PartDesign Subtractive_Sphere.svg|32px]] [[PartDesign SubtractiveSphere|Subtractive sphere]]: adds a subtractive sphere to the active body.
  
 
<!--T:82-->
 
<!--T:82-->
:*[[File:PartDesign SubtractiveTorus.png|32px]] [[PartDesign SubtractiveTorus|Subtractive torus]]: adds a subtractive torus to the active body.
+
:*[[File:PartDesign Subtractive_Torus.svg|32px]] [[PartDesign SubtractiveTorus|Subtractive torus]]: adds a subtractive torus to the active body.
  
 
<!--T:83-->
 
<!--T:83-->
:*[[File:PartDesign SubtractiveWedge.png|32px]] ‎[[PartDesign SubtractiveWedge|Subtractive wedge]]: adds a subtractive wedge to the active body.
+
:*[[File:PartDesign Subtractive_Wedge.svg|32px]] ‎[[PartDesign SubtractiveWedge|Subtractive wedge]]: adds a subtractive wedge to the active body.
  
 
==== Transformation tools ==== <!--T:84-->
 
==== Transformation tools ==== <!--T:84-->
Line 175: Line 175:
  
 
<!--T:86-->
 
<!--T:86-->
* [[Image:PartDesign_Mirrored.png|32px]] [[PartDesign_Mirrored|Mirrored]]: mirrors one or more features on a plane or face.
+
* [[Image:PartDesign_Mirrored.svg|32px]] [[PartDesign_Mirrored|Mirrored]]: mirrors one or more features on a plane or face.
  
 
<!--T:87-->
 
<!--T:87-->
* [[Image:PartDesign_LinearPattern.png|32px]] [[PartDesign_LinearPattern|Linear Pattern]]: creates a linear pattern based on one or more features.
+
* [[Image:PartDesign_LinearPattern.svg|32px]] [[PartDesign_LinearPattern|Linear Pattern]]: creates a linear pattern based on one or more features.
  
 
<!--T:88-->
 
<!--T:88-->
* [[Image:PartDesign_PolarPattern.png|32px]] [[PartDesign_PolarPattern|Polar Pattern]]: creates a polar pattern of one or more features.
+
* [[Image:PartDesign_PolarPattern.svg|32px]] [[PartDesign_PolarPattern|Polar Pattern]]: creates a polar pattern of one or more features.
  
 
<!--T:89-->
 
<!--T:89-->
* [[Image:PartDesign_MultiTransform.png|32px]] [[PartDesign_MultiTransform|Create MultiTransform]]: creates a pattern with any combination of the other transformations.
+
* [[Image:PartDesign_MultiTransform.svg|32px]] [[PartDesign_MultiTransform|Create MultiTransform]]: creates a pattern with any combination of the other transformations.
  
 
==== Dress-up tools ==== <!--T:90-->
 
==== Dress-up tools ==== <!--T:90-->
Line 192: Line 192:
  
 
<!--T:92-->
 
<!--T:92-->
*[[File:PartDesign Fillet.png|32px]] [[PartDesign Fillet|Fillet]]: fillets (rounds) edges of the active body.
+
*[[File:PartDesign Fillet.svg|32px]] [[PartDesign Fillet|Fillet]]: fillets (rounds) edges of the active body.
  
 
<!--T:93-->
 
<!--T:93-->
*[[File:PartDesign Chamfer.png|32px]] [[PartDesign Chamfer|Chamfer]]: chamfers edges of the active body.
+
*[[File:PartDesign Chamfer.svg|32px]] [[PartDesign Chamfer|Chamfer]]: chamfers edges of the active body.
  
 
<!--T:94-->
 
<!--T:94-->
*[[File:PartDesign Draft.png|32px]] [[PartDesign Draft|Draft]]: applies an angular draft to selected faces of the active body.
+
*[[File:PartDesign Draft.svg|32px]] [[PartDesign Draft|Draft]]: applies an angular draft to selected faces of the active body.
  
 
<!--T:95-->
 
<!--T:95-->
*[[File:PartDesign Thickness.png|32px]] [[PartDesign Thickness|Thickness]]: creates a thick shell from the active body and opens selected face(s).
+
*[[File:PartDesign Thickness.svg|32px]] [[PartDesign Thickness|Thickness]]: creates a thick shell from the active body and opens selected face(s).
  
 
==== Boolean ==== <!--T:96-->
 
==== Boolean ==== <!--T:96-->
  
 
<!--T:97-->
 
<!--T:97-->
*[[File:PartDesign Boolean.png|32px]] [[PartDesign Boolean|Boolean operation]]: imports one or more Bodies or PartDesign Clones into the active body and applies a Boolean operation.
+
*[[File:PartDesign_Boolean.svg|32px]] [[PartDesign Boolean|Boolean operation]]: imports one or more Bodies or PartDesign Clones into the active body and applies a Boolean operation.
  
 
==== Extras ==== <!--T:98-->
 
==== Extras ==== <!--T:98-->
Line 217: Line 217:
  
 
<!--T:101-->
 
<!--T:101-->
* [[Image:PartDesign_WizardShaft.png|32px]] [[PartDesign_WizardShaft|Shaft design wizard]]: Generates a shaft from a table of values and allows to analyze forces and moments. The shaft is made with a revolved sketch that can be edited.
+
* [[Image:WizardShaft.svg|32px]] [[PartDesign_WizardShaft|Shaft design wizard]]: Generates a shaft from a table of values and allows to analyze forces and moments. The shaft is made with a revolved sketch that can be edited.
  
 
<!--T:102-->
 
<!--T:102-->
* [[Image:PartDesign_InternalExternalGear.png|32px]] [[PartDesign_InvoluteGear|Involute gear]]: creates an involute gear profile that can be used by a Pad.
+
* [[Image:PartDesign_InternalExternalGear.svg|32px]] [[PartDesign_InvoluteGear|Involute gear]]: creates an involute gear profile that can be used by a Pad.
  
 
=== Contextual Menu tools === <!--T:103-->
 
=== Contextual Menu tools === <!--T:103-->
  
 
<!--T:104-->
 
<!--T:104-->
*[[File:PartDesign MoveTip.png|32px]] [[PartDesign MoveTip|Set tip]]: redefines the tip, which is the feature exposed outside of the Body.
+
*[[File:PartDesign MoveTip.svg|32px]] [[PartDesign MoveTip|Set tip]]: redefines the tip, which is the feature exposed outside of the Body.
  
 
<!--T:105-->
 
<!--T:105-->
Line 236: Line 236:
  
 
<!--T:114-->
 
<!--T:114-->
*[[Image:Std_DlgParameter.png|32px]] [[PartDesign_Preferences|Preferences...]]: Preferences available in PartDesign Tools.
+
*[[File:Preferences-general.svg|32px]] [[PartDesign_Preferences|Preferences...]]: Preferences available in PartDesign Tools.
*[[Image:Std_DlgParameter.png|32px]] [[Fine-tuning]]: Some extra parameters to fine-tune PartDesign behavior
+
*[[Fine-tuning]]: Some extra parameters to fine-tune PartDesign behavior
  
 
== Tutorials == <!--T:107-->
 
== Tutorials == <!--T:107-->

Latest revision as of 23:14, 23 July 2019

Other languages:
български • ‎čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎hrvatski • ‎Bahasa Indonesia • ‎italiano • ‎日本語 • ‎한국어 • ‎polski • ‎português • ‎português do Brasil • ‎română • ‎русский • ‎svenska • ‎Türkçe • ‎українська • ‎中文 • ‎中文(中国大陆)‎ • ‎中文(台灣)‎

Workbench PartDesign.svg

With the release of FreeCAD version 0.17, the PartDesign workbench benefits from important changes. This documentation reflects this new version. For FreeCAD 0.16 users, please refer to the old PartDesign Legacy page.


Introduction

The PartDesign Workbench provides advanced tools for modeling complex solid parts. It is mostly focused on creating mechanical parts that can be manufactured and assembled into a finished product. Nevertheless, the created solids can be used in general for any other purpose such as architectural design, finite element analysis, or machining and 3D printing.

The PartDesign Workbench is intrinsically related to the Sketcher Workbench. The user normally creates a Sketch, then uses the PartDesign Pad tool to extrude it and create a basic solid, and then this solid is further modified.

While the Part Workbench is based on a constructive solid geometry (CSG) methodology for building shapes, the PartDesign Workbench uses a parametric, feature editing methodology, which means a basic solid is sequentially transformed by adding features on top until the final shape is obtained. See the feature editing page for a more complete explanation of this process, and then see Creating a simple part with PartDesign to get started with creating solids.

The bodies created with PartDesign are often subject to the topological naming problem which causes internal features to be renamed when the parametric operations are modified. This problem can be minimized by following the best practices described in the feature editing page, and by taking advantage of datum objects as support for sketches and features.

PartDesign Example.png

Tools

The Part Design tools are all located in the Part Design menu and the PartDesign toolbar that appear when you load the Part Design workbench.

Structure tools

These are tools to organize the Model tree.

  • Geofeaturegroup.svg Part: adds a new Part container in the active document and makes it active.
  • Group.svg Group: adds a Group in the active document's Model tree.

Part Design Helper tools

  • PartDesign Body.png Create body: Creates a Body in the active document and makes it active.
  • Sketcher NewSketch.svg Create sketch: creates‎ a new sketch on a selected face or plane. If no face is selected while this tool is executed, the user is prompted to select a plane from the Tasks panel. The interface then switches to the Sketcher Workbench in sketch editing mode.
  • Sketcher MapSketch.svg Map sketch to face: Maps a sketch to a previously selected plane or a face of the active body.

Part Design Modeling tools

Datum tools

Additive tools

These are tools for creating base features or adding material to an existing solid body.

  • PartDesign Pad.svg Pad: extrudes a solid from a selected sketch.
  • PartDesign Revolution.svg Revolution: creates a solid by revolving a sketch around an axis. The sketch must form a closed profile.
  • PartDesign Additive Loft.svg Additive loft: creates a solid by making a transition between two or more sketches.
  • PartDesign Additive Pipe.svg Additive pipe: creates a solid by sweeping one or more sketches along an open or closed path.

Subtractive tools

These are tools for subtracting material from an existing body.

  • PartDesign Pocket.svg Pocket: creates a pocket from a selected sketch.
  • PartDesign Hole.svg Hole: creates a hole feature from a selected sketch. The sketch must contain one or multiple circles.
  • PartDesign Groove.svg Groove: creates a groove by revolving a sketch around an axis.
  • PartDesign Subtractive Loft.svg Subtractive loft: creates a solid shape by making a transition between two or more sketches and subtracts it from the active body.
  • PartDesign Subtractive Pipe.svg Subtractive pipe: creates a solid shape by sweeping one or more sketches along an open or closed path and subtracts it from the active body.

Transformation tools

These are tools for transforming existing features. They will allow you to choose which features to transform.

  • PartDesign Mirrored.svg Mirrored: mirrors one or more features on a plane or face.
  • PartDesign LinearPattern.svg Linear Pattern: creates a linear pattern based on one or more features.

Dress-up tools

These tools apply a treatment to the selected edges or faces.

  • PartDesign Fillet.svg Fillet: fillets (rounds) edges of the active body.
  • PartDesign Chamfer.svg Chamfer: chamfers edges of the active body.
  • PartDesign Draft.svg Draft: applies an angular draft to selected faces of the active body.
  • PartDesign Thickness.svg Thickness: creates a thick shell from the active body and opens selected face(s).

Boolean

  • PartDesign Boolean.svg Boolean operation: imports one or more Bodies or PartDesign Clones into the active body and applies a Boolean operation.

Extras

Some additional functionality found in the Part Design menu:

  • Migrate: migrates files created with older FreeCAD versions. If the file is pure PartDesign feature-based, migration should succeed. If the file contains mixed Part/Part Design/Draft objects, the conversion will most likely fail.
  • WizardShaft.svg Shaft design wizard: Generates a shaft from a table of values and allows to analyze forces and moments. The shaft is made with a revolved sketch that can be edited.
  • PartDesign InternalExternalGear.svg Involute gear: creates an involute gear profile that can be used by a Pad.

Contextual Menu tools

  • PartDesign MoveTip.svg Set tip: redefines the tip, which is the feature exposed outside of the Body.
  • Move object after other object: allows reordering of the Body tree by moving the selected sketch, datum geometry or feature to another position in the list of features.

Preferences

  • Preferences-general.svg Preferences...: Preferences available in PartDesign Tools.
  • Fine-tuning: Some extra parameters to fine-tune PartDesign behavior

Tutorials

Links