PartDesign SubtractiveWedge/tr

From FreeCAD Documentation
Revision as of 15:24, 14 February 2019 by FuzzyBot (talk | contribs) (Updating to match new version of source page)
Jump to: navigation, search
Other languages:
Deutsch • ‎English • ‎français • ‎italiano • ‎română • ‎Türkçe

PartDesign SubtractiveWedge.svg PartDesign SubtractiveWedge

Menu location
Part Design → Create a subtractive primitive → Subtractive Wedge
Workbenches
PartDesign
Default shortcut
None
Introduced in version
-
See also
PartDesign CompPrimitiveSubtractive


Tanım

Inserts a subtractive wedge in the active Body. Its shape is subtracted from the existing solid.

introduced in version 0.17

PartDesign SubtractiveWedge example.svg

On the left: active body (A) shown in grey and subtractive wedge (B) shown in transparent red; result on the right.

How to use

  1. Press the PartDesign SubtractiveWedge.png Subtractive Wedge button. Note: the Subtractive Wedge is part of an icon menu labelled Create an additive primitive. After launching FreeCAD, the Subtractive Box is the one displayed in the toolbar. To get the Wedge, click on the down arrow besides the visible icon and select Subtractive Wedge in the menu.
  2. Set the Primitive parameters and Attachment.
  3. Click OK.
  4. A Wedge feature appears under the active Body.

Options

The Wedge can be edited after its creation in two ways:

  • Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
  • Via the Property editor.

Properties

Using the default placement, the below inputs are:

  • DATAX min/max : Base face X axis span
  • DATAY min/max: Wedge height span
  • DATAZ min/max : Base face Z axis span
  • DATAX2 min/max : Top face X axis span
  • DATAZ2 min/max : Top face Z axis span