PartDesign Cuneo sottrattivo

From FreeCAD Documentation
Revision as of 10:33, 8 February 2018 by Renatorivo (talk | contribs) (Created page with "Inserisce un cuneo sottrattivo nel corpo attivo. La sua forma viene sottratta dal solido esistente.")

Cuneo sottrattivo

Posizione nel menu
Part Design → Crea una primitiva sottrattiva → Cuneo
Ambiente
PartDesign
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Primitive sottrattive

Descrizione

Inserisce un cuneo sottrattivo nel corpo attivo. La sua forma viene sottratta dal solido esistente.

introduced in version 0.17

On the left: active body (A) shown in grey and subtractive wedge (B) shown in transparent red; result on the right.

How to use

  1. Press the Subtractive Wedge button. Note: the Subtractive Wedge is part of an icon menu labelled Create an additive primitive. After launching FreeCAD, the Subtractive Box is the one displayed in the toolbar. To get the Wedge, click on the down arrow besides the visible icon and select Subtractive Wedge in the menu.
  2. Set the Primitive parameters and Attachment.
  3. Click OK.
  4. A Wedge feature appears under the active Body.

Options

The Wedge can be edited after its creation in two ways:

  • Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
  • Via the Property editor.

Properties

Using the default placement, the below inputs are:

  • DatiX min/max : Base face X axis span
  • DatiY min/max: Wedge height span
  • DatiZ min/max : Base face Z axis span
  • DatiX2 min/max : Top face X axis span
  • DatiZ2 min/max : Top face Z axis span