PartDesign SubtractivePrism/it: Difference between revisions

From FreeCAD Documentation
(Created page with "{{GuiCommand/it|Name=PartDesign SubtractivePrism|Name/it=Prisma sottrattivo|Workbenches=PartDesign|MenuLocation=Part Design → Crea una primitiva...")
(Created page with "==Descrizione==")
Line 1: Line 1:
{{GuiCommand/it|Name=PartDesign SubtractivePrism|Name/it=Prisma sottrattivo|Workbenches=[[PartDesign Workbench/it|PartDesign]]|MenuLocation=Part Design → Crea una primitiva sottrattiva → Prisma|Shortcut=Nessuno|SeeAlso=[[PartDesign CompPrimitiveSubtractive/it|Primitive sottrattive]]}}
{{GuiCommand/it|Name=PartDesign SubtractivePrism|Name/it=Prisma sottrattivo|Workbenches=[[PartDesign Workbench/it|PartDesign]]|MenuLocation=Part Design → Crea una primitiva sottrattiva → Prisma|Shortcut=Nessuno|SeeAlso=[[PartDesign CompPrimitiveSubtractive/it|Primitive sottrattive]]}}


==Description==
==Descrizione==


Inserts a subtractive prism in the active Body. Its shape is subtracted from the existing solid.
Inserts a subtractive prism in the active Body. Its shape is subtracted from the existing solid.

Revision as of 08:38, 8 February 2018

Prisma sottrattivo

Posizione nel menu
Part Design → Crea una primitiva sottrattiva → Prisma
Ambiente
PartDesign
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Primitive sottrattive

Descrizione

Inserts a subtractive prism in the active Body. Its shape is subtracted from the existing solid.

introduced in version 0.17

On the left: active body (A) shown in grey and subtractive prism (B) shown in transparent red; result on the right.

How to use

  1. Press the Subtractive Prism button. Note: the Subtractive Prism is part of an icon menu labelled Create an subtractive primitive. After launching FreeCAD, the Subtractive Box is the one displayed in the toolbar. To get the Prism, click on the down arrow besides the visible icon and select Subtractive Prism in the menu.
  2. Set the Primitive parameters and Attachment.
  3. Click OK.
  4. A Prism feature appears under the active Body.

Options

The Prism can be edited after its creation in two ways:

  • Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
  • Via the Property editor.

Properties

To be added