PartDesign Cubo sottrattivo
Cubo sottrattivo |
Posizione nel menu |
---|
Part Design → Crea una primitiva sottrattiva → Cubo |
Ambiente |
PartDesign |
Avvio veloce |
None |
Introdotto nella versione |
- |
Vedere anche |
Primitive sottrattive |
Descrizione
Inserts a subtractive box in the active Body. Its shape is subtracted from the existing solid.
On the left: active body (A) shown in grey and subtractive box (B) shown in transparent red; result on the right.
How to use
- Press the Subtractive Box button. Note: the Subtractive Box is part of an icon menu labelled Create a subtractive primitive. After launching FreeCAD, the Subtractive Box is the one displayed in the toolbar. If a different primitive is displayed, click on the down arrow besides the icon and select Subtractive Box in the menu.
- Set the Primitive parameters and Attachment.
- Click OK.
- A Box feature appears under the active Body.
Options
The Box can be edited after its creation in two ways:
- Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
- Via the Property editor.
Properties
- DatiAttachment: defines the attachment mode as well as the Attachment Offset. See Part Attachment.
- DatiLabel: Label given to the Box object. Change to suit your needs.
- DatiLength: the Box's dimension in the X-direction.
- DatiWidth: the Box's dimension in the Y-direction.
- DatiHeight: the Box's dimension in the Z-direction.