PartDesign Pocket/tr: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 4: Line 4:
{{GuiCommand|Name=PartDesign Pocket|Workbenches=[[PartDesign Workbench|PartDesign]]|MenuLocation=PartDesign → Pocket}}
{{GuiCommand|Name=PartDesign Pocket|Workbenches=[[PartDesign Workbench|PartDesign]]|MenuLocation=PartDesign → Pocket}}


<div class="mw-translate-fuzzy">
== Tanım ==
== Tanım ==
</div>


[[File:PartDesign Pocket example.svg|none]]
[[File:PartDesign Pocket example.svg|none]]

Revision as of 07:57, 16 July 2019

PartDesign Pocket

Menu location
PartDesign → Pocket
Workbenches
PartDesign
Default shortcut
None
Introduced in version
-
See also
None

Tanım

Sketch profile (A) was mapped to the top face of base solid (B); result after pocketing through on the right.

How to use

  1. Select the sketch to be pocketed.
    v0.16 and below The sketch must be mapped to the planar face of an existing solid or Part Design feature, or an error message will appear.
  2. Press the Pocket button.
  3. Set the Pocket parameters (see next section).
  4. Click OK.

Options

When creating a pocket, the Pocket parameters dialogue offers five different ways of specifying the length (depth) to which the pocket will be extruded:

Dimension

Enter a numeric value for the depth of the pocket. The default direction for extrusion is into the support. Extrusions occur normal to the defining sketch plane. Negative dimensions are not possible. Use the Reversed option instead.

To first

The pocket will extrude up to the first face of the support in the extrusion direction. In other words, it will cut through all material until it reaches an empty space.

Through all

The pocket will cut through all material in the extrusion direction. With the option Symmetric to plane the pad will cut through all material in both directions.

Up to face

The pocket will extrude up to a face in the support that can be chosen by clicking on it.

Two dimensions

v0.17 and above This allows to enter a second length in which the pad should extend in the opposite direction (into the support). Again can be changed by ticking the Reversed option.


Limitations

  • Use the type Dimension or Through All wherever possible because the other types sometimes give trouble when they are being patterned
  • Otherwise, the pocket feature has the same limitations as the pad feature.

Useful links

An example with the practice on the forum.