PartDesign Pad/es: Difference between revisions
Emagdalena (talk | contribs) (Languages spanish) |
Emagdalena (talk | contribs) m (Languages spanish) |
||
| Line 22: | Line 22: | ||
===Reverse=== |
===Reverse=== |
||
A switch to toggle the direction of the extrusion (positive or negative along the <em>normal</em> of its defining sketch). (Default = False). |
A switch to toggle the direction of the extrusion (positive or negative along the <em>normal</em> of its defining sketch). (Default = False). |
||
{{clear}} |
|||
{{languages/es | {{en|PartDesign_Pad}} }} |
{{languages/es | {{en|PartDesign_Pad}} }} |
||
Revision as of 18:10, 14 December 2011
|
|
| Ubicación en el Menú |
|---|
| Diseño de Piezas -> Saliente |
| Entornos de trabajo |
| Diseño de Piezas, Complete |
| Atajo de teclado por defecto |
| Ninguno |
| Introducido en versión |
| - |
| Ver también |
| Ninguno |
Introducción
'Pad a selected sketch' - This tool takes a selected sketch as its input (the 'defining sketch'), and produces with it a 'pad'. A pad is essentially an extrusion of a sketch. For example, if a sketch were made of two concentric circles, and the pad tool were subsequently used on this sketch, the result would be a cylinder:
Options
When creating a pad, the 'pad parameters' dialogue has three parameters available for the user to edit:
Type
This parameter currently only has one implemented option - 'Dimension' - this tells the pad tool that it is a dimension that is to control the formation of the pad.
Length
This parameter sets the length a sketch is to be extruded by. Extrusions occur normal to the defining sketch plane.
Mirrored extent
This parameter is not currently implemented - the intention is to allow a mirroring of the pad about the plane of its defining sketch.
Reverse
A switch to toggle the direction of the extrusion (positive or negative along the normal of its defining sketch). (Default = False).
