PartDesign Migrate

From FreeCAD Documentation
Revision as of 17:05, 14 February 2019 by Mario52 (talk | contribs) (Marked this version for translation)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Other languages:
Deutsch • ‎English • ‎français • ‎italiano • ‎română

PartDesign Migrate

Menu location
Part Design → Migrate
Workbenches
PartDesign
Default shortcut
None
Introduced in version
0.17
See also
None


Description

The PartDesign workbench in FreeCAD v0.17 introduces new tools and elements that are not recognized by older FreeCAD versions (0.16 and older). FreeCAD documents created in older versions can still be opened and edited. To benefit from the new features, they must be migrated via the menu PartDesign → Migrate.

introduced in version 0.17

How to use

  1. Open an older FreeCAD (≤ 0.16) document.
  2. Switch to the PartDesign workbench.
  3. Go to the Part DesignMigrate menu.
  4. If the migration works, a Std Part.png Part container will be created which will hold one or more PartDesign Body.png Bodies, each hosting a chain of features.

Limitations

  • Before starting the migration process, check if the model was built with automatic refine options enabled (in Edit → Preferences → Part design → General), and set your preferences accordingly. This can be easily determined by successively toggling the visibility of the features in the Model tree. If no residual edges are left between features such as Pads and Pockets, the automatic refine options were disabled.
  • If a document to migrate only contains sketches and PartDesign features, the migration process may likely succeed. Some features such as chamfers and fillets may require rebuilding.
  • If the document to migrate has a mixed Part/Part Design/Draft work flow, the conversion will most likely fail or at best produce unexpected results, and will need to be migrated manually.