PartDesign Groove/it: Difference between revisions

From FreeCAD Documentation
No edit summary
(Updating to match new version of source page)
Line 14: Line 14:
# Fare clic su {{KEY/it|[[Image:PartDesign_Groove.png|16px]] Groove}}.
# Fare clic su {{KEY/it|[[Image:PartDesign_Groove.png|16px]] Groove}}.


The '''Groove''' tool revolves a selected sketch or profile about a given axis, cutting out material from the support.
The '''Groove''' tool revolves a selected sketch or profile about a given axis, cutting out material from the support .


[[File:PartDesign Groove example.svg|none]]
[[File:PartDesign Groove example.svg|none]]


''Above: sketch (A) is revolved around axis (B); resulting groove on solid (C) is shown right.''
''Above: sketch (A) is revolved around axis (B); resulting groove on solid (C) is shown right. ''


== How to use ==
== How to use==


# Select the sketch to be revolved.
# Select the sketch to be revolved.
#: <span style="font-size:x-small;color:green;">v0.17 and above</span> A face on the existing solid can alternatively be used.
#: <span style="font-size:x-small;color:green;">v0.17 and above</span> A face on the existing solid can alternatively be used.
#: <span style="font-size:x-small;color:blue;">v0.16 and below</span> The sketch must be mapped to the planar face of an existing solid or Part Design feature, or an error message will appear.
#: <span style="font-size:x-small;color:blue;">v0.16 and below</span> The sketch must be mapped to the planar face of an existing solid or Part Design feature, or an error message will appear .
# Press the {{KEY|[[Image:PartDesign Groove.png|24px]] '''Groove'''}} button.
# Press the {{KEY|[[Image:PartDesign Groove.png|24px]] '''Groove'''}} button.
# Set the Groove parameters (see next section).
# Set the Groove parameters (see next section).
Line 46: Line 46:
</div>
</div>


When creating a groove, the '''Groove parameters''' dialogue offers several parameters specifying how the sketch should be revolved. They have exactly the same meaning as for the [[PartDesign_Revolution#Options|revolution]] feature.
When creating a groove, the '''Groove parameters''' dialogue offers several parameters specifying how the sketch should be revolved.


{|
{|
| [[Image:partdesign_groove_parameters.png|left]]
| [[Image:partdesign_groove_parameters.png|left]]
|
|
===Axis===
===Axis ===


This option specifies the axis about which the sketch is to be revolved.
This option specifies the axis about which the sketch is to be revolved.
* '''Vertical sketch axis''': selects the vertical sketch axis.
* '''Vertical sketch axis''': selects the vertical sketch axis .
* '''Horizontal sketch axis''': selects the horizontal sketch axis.
* '''Horizontal sketch axis''': selects the horizontal sketch axis.
* '''Sketch axis''': <span style="font-size:x-small;color:blue;">v0.16 and below</span> selects a construction line contained in the sketch used by the Groove. The first construction line created in the sketch will be labelled ''Sketch axis 0''. The drop down list will contain one custom sketch axis for each construction line.
* '''Sketch axis''': <span style="font-size:x-small;color:blue;">v0.16 and below</span> selects a construction line contained in the sketch used by the Groove. The first construction line created in the sketch will be labelled ''Sketch axis 0''. The drop down list will contain one custom sketch axis for each construction line.
Line 62: Line 62:
* '''Select reference...''': <span style="font-size:x-small;color:green;">v0.17 and above</span> allows selection in the 3D view of an edge on the Body, or a [[PartDesign Line|datum line]].
* '''Select reference...''': <span style="font-size:x-small;color:green;">v0.17 and above</span> allows selection in the 3D view of an edge on the Body, or a [[PartDesign Line|datum line]].


===Angle===
===Angle ===


This controls the angle through which the groove is to be formed, e.g. 360° would be a full, contiguous revolution. It is not possible to specify negative angles (use the '''Reversed''' option instead) or angles greater than 360°.
This controls the angle through which the groove is to be formed, e.g. 360° would be a full, contiguous revolution. It is not possible to specify negative angles (use the '''Reversed''' option instead) or angles greater than 360° .


===Symmetric to plane===
===Symmetric to plane ===


If checked, the groove will extend half of the specified angle in both directions from the sketch plane.
If checked, the groove will extend half of the specified angle in both directions from the sketch plane .


===Reversed===
===Reversed ===


If checked, the direction of revolution is reversed from default clockwise to counterclockwise.
If checked, the direction of revolution is reversed from default clockwise to counterclockwise .
|}
|}


==Properties ==
== Properties ==


Below are properties which can be defined after creation of the feature. Data properties ''Base'' and ''Axis'' are uneditable.
Below are properties which can be defined after creation of the feature. Data properties ''Base'' and ''Axis'' are uneditable .


* {{PropertyData|Angle}}: angle of rotation. See [[#Angle|Angle]].
* {{PropertyData|Angle}}: angle of rotation. See [[#Angle|Angle]] .
* {{PropertyData|Label}}: label given to the operation, can be changed at convenience.
* {{PropertyData|Label}}: label given to the operation, can be changed at convenience.
* {{PropertyData|Midplane}}: true or false. See [[#Symmetric to plane|Symmetric to plane]].
* {{PropertyData|Midplane}}: true or false. See [[#Symmetric to plane|Symmetric to plane]].

Revision as of 06:47, 18 March 2018

Scanalatura

Posizione nel menu
PartDesign → Scanalatura
Ambiente
PartDesign, Completo
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Rivoluzione

Descrizione

Questo strumento rivoluziona uno schizzo selezionato o un oggetto 2D attorno ad un dato asse, asportando del materiale dall'oggetto di supporto. La seguente figura mostra un esempio di Scanalatura realizzata in un albero.

Utilizzo

  1. Selezionare uno schizzo mappato su una faccia o un oggetto 2D
  2. Fare clic su Template:KEY/it.

The Groove tool revolves a selected sketch or profile about a given axis, cutting out material from the support .

Above: sketch (A) is revolved around axis (B); resulting groove on solid (C) is shown right.

How to use

  1. Select the sketch to be revolved.
    v0.17 and above A face on the existing solid can alternatively be used.
    v0.16 and below The sketch must be mapped to the planar face of an existing solid or Part Design feature, or an error message will appear .
  2. Press the Groove button.
  3. Set the Groove parameters (see next section).
  4. Press OK.

Opzioni

Quando si crea una scanalatura, la finestra di dialogo Parametri Groove offre diversi parametri per specificare come deve essere ruotato il disegno. I parametri di Scanalatura hanno esattamente lo stesso significato che hanno per la funzione di rivoluzione.

Assi

Questa opzione specifica l'asse intorno al quale il disegno deve essere ruotato. Attualmente, in questa finestra, si può selezionare solo l'asse schizzo orizzontale o verticale.

Angolo

Questa opzione specifica l'angolo di rotazione dello schizzo. Per ottenere una scanalatura completa occorre impostare un angolo di 360°. Non è possibile specificare angoli negativi (se è necessario usare l'opzione Invertito) o angoli maggiori di 360°.

Simmetrico al piano

La rivoluzione si estende per metà dell'angolo specificato in entrambe le direzioni rispetto al piano di schizzo.

Invertito

La direzione di rivoluzione viene invertita.

When creating a groove, the Groove parameters dialogue offers several parameters specifying how the sketch should be revolved.

Axis

This option specifies the axis about which the sketch is to be revolved.

  • Vertical sketch axis: selects the vertical sketch axis .
  • Horizontal sketch axis: selects the horizontal sketch axis.
  • Sketch axis: v0.16 and below selects a construction line contained in the sketch used by the Groove. The first construction line created in the sketch will be labelled Sketch axis 0. The drop down list will contain one custom sketch axis for each construction line.
  • Construction line: v0.17 and above selects a construction line contained in the sketch used by the Groove. The drop down list will contain an entry for each construction line. The first construction line created in the sketch will be labelled Construction line 1.
  • Base (X/Y/Z) axis: v0.17 and above selects the X, Y or Z axis of the Body's Origin;
  • Select reference...: v0.17 and above allows selection in the 3D view of an edge on the Body, or a datum line.

Angle

This controls the angle through which the groove is to be formed, e.g. 360° would be a full, contiguous revolution. It is not possible to specify negative angles (use the Reversed option instead) or angles greater than 360° .

Symmetric to plane

If checked, the groove will extend half of the specified angle in both directions from the sketch plane .

Reversed

If checked, the direction of revolution is reversed from default clockwise to counterclockwise .

Properties

Below are properties which can be defined after creation of the feature. Data properties Base and Axis are uneditable .

  • DatiAngle: angle of rotation. See Angle .
  • DatiLabel: label given to the operation, can be changed at convenience.
  • DatiMidplane: true or false. See Symmetric to plane.
  • DatiReversed: true or false. See Reversed.
  • DatiRefine: v0.17 and above true or false. If set to true, cleans the solid from residual edges left by features. See Part RefineShape for more details.