PartDesign CoordinateSystem/de

PartDesign CoordinateSystem
Menu location
PartDesign → Create a local coordinate system
Workbenches
PartDesign
Default shortcut
None
Introduced in version
0.18
See also
Datum point, Datum line, Datum plane

Beschreibung

Erzeugt ein lokales Koordinatensystem, das als Referenz für andere Bezugsgeometrie verwendet werden kann. Es hilft auch, die Orientierung der referenzierten Bezugsgeometrie im 3D-Raum zu ermitteln.

Lokales Koordinatensystem, das aus dem Ursprung einer Bezugsebene entspring.

How to use

1. Press the Create a local coordinate system button.
2. Define Coordinate System parameters. Select a first reference in the 3D view to filter the available attachment modes.
3. Depending on the selected reference, there may be one or more attachment modes available in the the list. The most likely one will automatically be selected and shown in bold in the list. The text Attached with mode along with the attachment mode name will appear in green at the top of the Parameters panel.
4. To add an additional reference, press the next Reference button. Once pressed its label changes to Selecting... until a selection is made.
5. Select an attachment mode in the list.
6. Define Attachment Offset values.
7. Press OK.

Options

Double-click the Local_CS label in the Model tree or right-click and select Edit datum in the contextual menu to edit its parameters. For more details about Attachment mode and Attachment offset, see Attachment.

Properties

Data

• DatenMapMode: lists the attachment mode used.
• DatenAttachment Reversed: indicates if the coordinate system is reversed in orientation.
• DatenAttachment Offset: applies a transformation (translation and rotation) in reference to the attachment placement.
• DatenPlacement: indicates the coordinates and alignment of the coordinates system´s origin .
• DatenLabel: name given to the object, this name can be changed at convenience.