PartDesign Chamfer

PartDesign Chamfer
Menu location
Part Design → Chamfer
Workbenches
PartDesign, Complete
Default shortcut
None
Introduced in version
-
See also
Chamfer Part

Description

This tool creates chamfers (flat face at 45 degrees to both adjoining faces) on the selected edges of an object. A new separate Chamfer entry (followed by a sequential number if there are already existing fillets in the document) is created in the Project tree.

Sélection des arêtes avant de démarrer la commande. Réglage de la dimension du chanfrein dans les paramètres de chanfrein. Un élément Chamfer est ajouté dans l'arborescence Projet.

Usage Select a single or multiple edges or a face on an object, then start the tool either by clicking its icon or going into the menu. In case you selected a face all its edges are respected for filleting. In Chamfer parameters in the TaskPanel, set the chamfer size either by entering the value, or by clicking on the up/down arrows. The applied chamfer is shown in real time. If you want to add more edges or faces click first the Add ref button and then select the edge or the face. If you want to remove edges or faces click the Remove ref button. All edges and faces being previously selected are highlighted in purple. Select the edge or the face to be removed. Click OK to validate. For a chain of edges tangential to one another, one single edge can be selected; the chamfer will propagate along the chain. To edit the chamfer after the function has been validated, either double-click on the Chamfer label in the Project tree, or right-click on it and select Edit Chamfer. PartDesign Chamfer VS. Part Chamfer