Ambiente OpenSCAD
Il modulo OpenSCAD è in una fase di sviluppo iniziale.
Il modulo OpenSCAD offre interoperabilità con il software open source OpenSCAD.
Contiene un importatore che permette di aprire i file .csg di OpenSCAD in FreeCAD.
L'esportatore emette un file CSG basato sul (sotto)albero del file .csg. Le geometrie che non si basano su operazioni CSG vengono esportate come maglie (mesh).
Il modulo OpenSCAD contiene una serie di strumenti con funzioni per modificare l'albero delle operazioni e riparare i modelli.
OpenSCAD language and file format
The OpenSCAD language allows the use of variables and loops. It allows you to specify submodules to reuse geometry and code. This high degree of flexibility makes parsing very complex. Currently the OpenSCAD module in FreeCAD can not handle the OpenSCAD language natively. Instead, if OpenSCAD is installed, it can be used to convert the input to an output format named 'CSG'. It is a subset of the OpenSCAD Language and can be used as the input to OpenSCAD for further processing. During conversion all parametric behavior is lost - all variable names are discarded, loops expanded and mathematical expressions evaluated.
GUI Commands
Limitations
OpenSCAD creates constructive solid geometry as well as importing mesh files and extruding 2d geometry (from dxf files). FreeCAD allows you to create CSG with primitives as well. The FreeCAD geometry kernel (OCCT) works using a boundary representation. Therefore conversion from CSG to BREP should, in theory, be possible whereas conversion from BREP to CSG is, in general, not.
OpenSCAD works internaly on meshes. Some operations which are useful on meshes are not meaningful on a BREP model and are currently not available. Among these are convex hull, minkowski sum, glide and subdiv. OpenSCAD is very tolerant when doing booleans on coincident geometry. The FreeCAD geometry kernel is less tolerant. An automatic solution is not available at the moment. Please feel free to post to the forum if you encounter such problems.
Hints
When importing DXF set the Draft precision to a sensible amount as this will affect the detection of connected edges.
If FreeCAD crashes when importing CSG, it is strongly recommended that you enable 'automatically check model after boolean operation' in Menu -> Edit -> Preferences -> Part Design -> Model setting