Navigare col mouse

From FreeCAD Documentation
Revision as of 14:09, 11 April 2019 by Renatorivo (talk | contribs)

La funzione Navigazione 3D - Tipo di mouse di FreeCAD comprende i comandi utilizzati per navigare visivamente lo spazio 3D e per interagire con gli oggetti visualizzati. Attualmente FreeCAD offre diversi stili di navigazione con il mouse. Lo stile di navigazione predefinito, denominato "Navigazione CAD​​", è molto semplice e pratico, ma si può anche usare uno stile alternativo, secondo le proprie preferenze.

Navigazione

Lo stile di navigazione impostato viene utilizzato in tutti gli ambienti di lavoro.

Ci sono due modi per modificare lo stile di navigazione:

  • In Modifica → Preferenze, sezione Visualizzazione, scheda Vista 3D, voce Navigazione 3D selezionare la modalità desiderata;
  • Cliccare col tasto destro nello spazio vuoto dell'area di visualizzazione 3D, quindi selezionare Stili di navigazione nel menu contestuale.

Per controllare la posizione dell'oggetto e la vista si possono utilizzare i seguenti movimenti del mouse secondo lo stile di navigazione selezionato.

Navigazione CAD (default)

Questo è lo stile di navigazione predefinito e permette all'utente un semplice controllo della vista. Richiede l'uso della tastiera solo per eseguire multi-selezioni. Template:CAD Navigation/it

Select Pan Zoom Rotate view
First method
Rotate view
Alternate method
Press the left mouse button over an object you want to select.

Holding down Ctrl allows the selection of multiple objects.

Hold the middle mouse button, then move the pointer. Use the mouse wheel to zoom in and out.

Clicking the middle mouse button re-centers the view on the location of the cursor.

Hold the middle mouse button, then press and hold the left mouse button, then move the pointer.

The cursor location when the middle mouse button is pressed determines the center of rotation. Rotation works like spinning a ball which rotates around its center. If the buttons are released before you stop the mouse motion, the view continues spinning, if this is enabled.

A double click with the middle mouse button sets a new center of rotation.

Hold the middle mouse button, then press and hold the right mouse button, then move the pointer.

With this method the middle mouse button may be released after the right mouse button is held pressed.

Users who use the mouse with their right hand may find this method easier than the first method.

Ctrl+ Ctrl+Shift+ Shift+
Pan mode: hold the Ctrl key, press the right mouse button once, then move the pointer. introduced in version 0.17 Zoom mode: hold the Ctrl and Shift keys, press the right mouse button once, then move the pointer. introduced in version 0.17 Rotate mode: hold the Shift key, press the right mouse button once, then move the pointer. introduced in version 0.17

Navigazione OpenInventor

Nella Navigazione OpenInventor (formalmente Inventor), secondo il modello Open Inventor, da non confondere con Autodesk Inventor, non è possibile selezionare gli oggetti utilizzando solo il mouse. Per selezionare gli oggetti, è necessario tenere premuto il tasto Template:KEY/it. Template:Inventor Navigation/it

This mode is not based on Autodesk Inventor.

Select Pan Zoom Rotate view
{{{Shift}}}+
Hold Ctrl, then press the left mouse button over an object you want to select. Hold the middle mouse button, then move the pointer. Use the mouse wheel to zoom in and out.

Alternatively, hold the middle mouse button, then press and hold the left mouse button, then move the pointer.

Hold the left mouse button, then move the pointer.

Navigazione Blender

La navigazione Blender segue il modello di Blender. In precedenza non c'era la traslazione con il solo mouse, ed era richiesto l'uso del tasto SHIFT per spostare la vista. Questo è cambiato nel 2016 con l'introduzione di una funzione aggiuntiva. Per eseguire una panoramica della vista, ora è possibile premere i pulsanti sinistro e destro del mouse e trascinare la vista.

{{{Select_name}}} {{{Pan_name}}} {{{Zoom_name}}} {{{Rotate_view_name}}}
{{{Shift}}}+
{{{Select_text}}} {{{Pan_text}}} {{{Zoom_text}}} {{{Rotate_view_text}}}

Alternatively, hold both left and right mouse buttons, and then move the pointer. |Zoom_text=Use the mouse wheel to zoom in and out. |Rotate_view_text=Hold the middle mouse button, then move the pointer. }}

Navigazione Touchpad

Con la Navigazione Touchpad non è possibile effettuare le operazioni di traslazione, rotazione o ingrandimento utilizzando solo il mouse (oppure solo il touchpad). Per spostare la vista si deve premere il tasto SHIFT. Per ingrandire o ridurre premere PgUp oppure PgDn (senza usare il mouse o il touchpad). Per ruotare la vista tenere premuto il tasto ALT. Template:Touchpad Navigation/it

Navigazione Gesture (Gesture Navigation) (v0.16)

Questo stile di navigazione è fatto su misura per essere usato con il touchscreen o con la penna, ma è usabile anche con il mouse. Template:Gesture Navigation/it

Alternatively, tap and hold, then drag. This simulates the pan with the right mouse button. |Zoom_text=Use the mouse wheel to zoom in and out. |Zoom_gesture_text=Drag two fingers (pinch) closer or farther apart. |Rotate_view_text=Hold the left mouse button, then move the pointer. In Sketcher and other edit modes, this behavior is disabled. Hold Alt when pressing the mouse button to enter rotation mode.

To set the camera's focus point for rotation, click a point with the middle mouse button. Alternatively, aim the cursor at a point and press H on the keyboard. |Rotate_view_gesture_text=Drag with one finger to rotate.

Hold Alt when in the Sketcher. |Tilt_view_text=Hold both left and right mouse buttons, then move the pointer sideways. |Tilt_view_gesture_text=Rotate the imaginary line formed by two touch points.

On v0.18 this method is disabled by default. To enable, go to Edit → Preferences → Display, and untick "Disable touchscreen tilt gesture" checkbox. }}

Navigazione Maya-Gesture

Nella navigazione Maya-Gesture tutti i movimenti vista sono ottenuti premendo ALT e un pulsante del mouse, quindi per utilizzare correttamente questa modalità di navigazione è necessario disporre di un mouse con 3 pulsanti. In alternativa, dato che questo modo è stato sviluppato per essere normalmente usato come modalità di navigazione gestuale, è possibile utilizzare i gesti. Template:MayaGesture Navigation/it

Alternatively, use the mouse wheel to zoom in and out. |Rotate_view_text=Hold Alt and the left mouse button, then move the pointer. }}


Revit Navigation

This style was introduced in version 0.18.

Select Pan Zoom Rotate view
Shift+


Press the left mouse button over an object you want to select. Hold the middle mouse button, then move the pointer.

Alternatively, hold both left and right mouse buttons, then move the pointer.

Use the mouse wheel to zoom in and out. Hold Shift and the middle mouse button, then move the pointer.

Alternatively, hold the middle mouse button, then press and hold the right mouse button, then move the pointer.

OpenCascade

This style was introduced in version 0.18.

Select Pan Zoom Rotate view
Ctrl+ Ctrl+ Ctrl+


Press the left mouse button over an object you want to select. Hold the middle mouse button, then move the pointer. Use the mouse wheel to zoom in and out.

Alternatively, hold Ctrl and the left mouse button, then move the pointer.

Hold Ctrl and the right mouse button, then move the pointer.

La selezione degli oggetti

Selezione semplice

Gli oggetti si possono selezionare con un click del tasto sinistro del mouse o facendo clic sull'oggetto nella vista 3D o selezionandoli nella vista ad albero.

Preselezione

Passando con il mouse sugli oggetti, una funzione di Preselezione li evidenzia e visualizza le relative informazioni prima della loro selezione. Se questo comportamento non è gradito o si dispone di una macchina lenta, è possibile disattivare la funzione nel dialogo delle preferenze.

La manipolazione degli oggetti

FreeCAD offre strumenti Manipolatori utilizzabili per modificare un oggetto o il suo aspetto visivo.

Un esempio semplice è dato dal Piano di taglio attivabile con il menu Visualizza → Piano di taglio.

Supporto Hardware

FreeCAD supporta anche i dispositivi di input 3D.

Problemi con Mac OS X

Recentemente abbiamo ricevuto segnalazioni nel forum da utenti Mac che questi pulsanti del mouse e le combinazioni di tasti non funzionano come previsto. Purtroppo, nessuno degli sviluppatori possiede un Mac e neppure gli altri collaboratori regolari. Abbiamo bisogno del vostro aiuto per determinare quali pulsanti del mouse e quali combinazioni di tasti funzionano e poter aggiornare questo wiki.