Mesh FromPartShape: Difference between revisions
mNo edit summary |
(Marked this version for translation) |
||
Line 17: | Line 17: | ||
'''Standard Mesher''' |
'''Standard Mesher''' |
||
<!--T:7--> |
|||
[[Image:Mesh_Mesher_Standard.jpg]] |
[[Image:Mesh_Mesher_Standard.jpg]] |
||
<!--T:8--> |
|||
Surface deviation: If this number is smaller the mesh becomes finer. Smallest value is 0,001. |
Surface deviation: If this number is smaller the mesh becomes finer. Smallest value is 0,001. |
||
<br /> |
<br /> |
||
Line 24: | Line 26: | ||
'''Mefisto Mesher''' |
'''Mefisto Mesher''' |
||
<!--T:9--> |
|||
[[Image:Mesh_Mesher_Mefisto.jpg]] |
[[Image:Mesh_Mesher_Mefisto.jpg]] |
||
<!--T:10--> |
|||
Maximum edge length: If this number is smaller the mesh becomes finer. Smallest value is 0,000. |
Maximum edge length: If this number is smaller the mesh becomes finer. Smallest value is 0,000. |
||
<br /> |
<br /> |
||
Line 32: | Line 36: | ||
<!--T:11--> |
|||
[[Image:Mesh_Mesher_Netgen.jpg]] |
[[Image:Mesh_Mesher_Netgen.jpg]] |
||
<!--T:12--> |
|||
You can choose between mesh being: |
You can choose between mesh being: |
||
*Very coarse |
*Very coarse |
Revision as of 19:50, 20 March 2016
Mesh MeshFromShape |
Menu location |
---|
Meshes → Create Mesh from Shape |
Workbenches |
Mesh |
Default shortcut |
None |
Introduced in version |
- |
See also |
None |
Introduction
This command creates a mesh from a shape object.
Use
- Select the mesh object.
- Choose Meshes → Create Mesh from shape... from the top menu.
- A menu will ask for the mesher to use and the appropriate values for the mesher
Just selecting Meshes → Create Mesh from shape... will give you an additional menu to choose your shape to mesh
Standard Mesher
Surface deviation: If this number is smaller the mesh becomes finer. Smallest value is 0,001.
Mefisto Mesher
Maximum edge length: If this number is smaller the mesh becomes finer. Smallest value is 0,000.
Netgen mesher
You can choose between mesh being:
- Very coarse
- Coarse
- Moderate
- Fine
- Very fine
- User defined
For Mesh being "user defined" you can set these values:
- Mesh size grading : If this parameter is smaller, mesh becomes finer. A value in the range of 0.1-10.
- Element per edge : If this parameter is larger, mesh becomes finer. A value in the range of 0.1-10.
- Element per curvature radius : If this parameter is larger, mesh becomes finer. A value in the range of 0.1-10.
For every main option you can also choose:
- Optimize surface : Whether optimization of surface shape will be done.
- Second order elements:Whether second order elments will be generated.
- Quad dominant:Whether meshes will be arranged like hexahedral.
Limitations
Notes