Manual:All workbenches at a glance/de: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
Line 17: Line 17:
Der Part Arbeitsbereich bietet grundlegende Werkzeuge für die Arbeit mit Volumenkörpern: Primitive, wie Würfel und Kugeln, und einfache geometrische Operationen und boolesche Operationen. Als Hauptankerpunkt bei [https://en.wikipedia.org/wiki/Open_Cascade_Technology OpenCasCade] bietet der Part Arbeitsbereich die Grundlage des Geometriesystems von FreeCAD, und fast alle anderen Arbeitsbereiche erzeugen eine Teil-basierte Geometrie.
Der Part Arbeitsbereich bietet grundlegende Werkzeuge für die Arbeit mit Volumenkörpern: Primitive, wie Würfel und Kugeln, und einfache geometrische Operationen und boolesche Operationen. Als Hauptankerpunkt bei [https://en.wikipedia.org/wiki/Open_Cascade_Technology OpenCasCade] bietet der Part Arbeitsbereich die Grundlage des Geometriesystems von FreeCAD, und fast alle anderen Arbeitsbereiche erzeugen eine Teil-basierte Geometrie.


<div class="mw-translate-fuzzy">
{| class="wikitable" style="width:100%"
{| class="wikitable" style="width:100%"
! Werkzeug
! Werkzeug
Line 24: Line 23:
! Beschreibung
! Beschreibung
|-
|-
| [[Image:Part_Box.png|32px]] [[Part_Box/de|Quader]]
| [Image:Part_Box.png|32px]] [[Part_Box/de|Quader]]
| Zeichnet einen Quader
| Zeichnet einen Quader
| [[Image:Part_Cone.png|32px]] [[Part_Cone/de|Kegel]]
| [[Image:Part_Cone.png|32px]] [[Part_Cone/de|Kegel]]
Line 41: Line 40:
| [[Image:Part_Shapebuilder.png|32px]] [[Part_Shapebuilder/de|Formbauer]]
| [[Image:Part_Shapebuilder.png|32px]] [[Part_Shapebuilder/de|Formbauer]]
| Erstellt komplexere Formen aus Primitiven
| Erstellt komplexere Formen aus Primitiven
| [[Image:Part_Union.png|32px]] [[Part_Union/de|Union]]
| [[Image:Part_Union.png|32px]] [[Part_Union/de|Vereinigung]]
| Verschmilzt (Vereinigt) zwei Objekte
| Verschmilzt (Vereinigt) zwei Objekte
|-
|-
Line 87: Line 86:
| Den Flächen einer Form eine Dicke zuweisen
| Den Flächen einer Form eine Dicke zuweisen
|}
|}
</div>


=== Draft ===
=== Draft ===

Revision as of 20:11, 19 January 2020

Eine der größten Schwierigkeiten für neue Benutzer von FreeCAD, ist zu wissen, in welchem Arbeitsbereich ein bestimmtes Werkzeug zu finden ist. Die folgende Tabelle gibt einen Überblick über die wichtigsten Arbeitsbereiche und deren Werkzeuge. Eine vollständigere Liste findest du auf jeder Seite Arbeitsbereich in der FreeCAD Dokumentation.

Vier Arbeitsbereiche sind ebenfalls für die Arbeit in Paaren ausgelegt, wobei einer von ihnen vollständig in den anderen integriert ist: Arch enthält alle Entwurfswerkzeuge und PartDesign alle Skizzierer-Werkzeuge. Aus Gründen der Übersichtlichkeit sind sie jedoch unten getrennt.

Part

Der Part Arbeitsbereich bietet grundlegende Werkzeuge für die Arbeit mit Volumenkörpern: Primitive, wie Würfel und Kugeln, und einfache geometrische Operationen und boolesche Operationen. Als Hauptankerpunkt bei OpenCasCade bietet der Part Arbeitsbereich die Grundlage des Geometriesystems von FreeCAD, und fast alle anderen Arbeitsbereiche erzeugen eine Teil-basierte Geometrie.

Werkzeug Beschreibung Werkzeug Beschreibung
32px]] Quader Zeichnet einen Quader Kegel Zeichnet einen Kegel
Zylinder Zeichnet einen Zylinder Kugel Zeichnet eine Kugel
Torus Zeichnet einen Torus (Ring) Erstelle Primitiv Erstellt verschiedene andere parametrische geometrische Primitive
Formbauer Erstellt komplexere Formen aus Primitiven Vereinigung Verschmilzt (Vereinigt) zwei Objekte
Gemeinsam Entnimmt den gemeinsamen (Überschneidung) Teil von zwei Objekten Cut Schneidet (subtrahiert) ein Objekt von einem anderen
FügeVerbinden Verbindet die Innenbereiche von Hohlobjekten FügeEinbetten Bettet ein Hohlobjekt in ein anderes Hohlobjekt ein
FügeAusschnitt Erstellt einen Ausschnitt in einer Seitenwandung eines Hohlobjekts für ein anderes Hohlobjekt Extrudieren Extrudiert ebene Flächen eines Objekts
Verrundung Verrundet (rundet) Ecken eines Objekts [[Part_Revolve/de|Drehen] Erstellt einen Festkörper durch Drehung eines anderen (nicht festen) Objekts um eine Achse
Abschnitt Erstellt einen Abschnitt, indem ein Objekt mit einer Schnittebene überschneidet. AbschnittKreuzung Erstellt mehrfache Querschnitte entlang eines Objektes
Fase Anfasen der Ecken eines Objektes an Spiegel Spiegelt das ausgewählte Objekt auf einer vorgegebenen Spiegelebene
Regelfläche Erstellen einer Regelfläche zwischen ausgewählten Kurven Austragung Trägt ein oder mehrere Profile entlang eines Pfades aus
Ausformung Ausformen von einem Profil zum anderen Versatz Erstellt eine maßstabgetreue Kopie des Originalobjekts
Dicke Den Flächen einer Form eine Dicke zuweisen

Draft

The Draft Workbench provides tools to do basic 2D CAD drafting tasks: lines, circles, etc... and a series of generic handy tools such as move, rotate or scale. It also provides several drawing aids, such as grid and snapping. It is principally meant to draw the guidelines for Arch objects, but also serves as FreeCAD's "swiss knife".

Tool Description Tool Description
Line Draws a line segment between 2 points Wire Draws a line made of multiple line segments (polyline)
Circle Draws a circle from center and radius Arc Draws an arc segment from center, radius, start angle and end angle
Ellipse Draws an ellipse from two corner points Polygon Draws a regular polygon from a center and a radius
Rectangle Draws a rectangle from 2 opposite points Text Draws a multi-line text annotation
Dimension Draws a dimension annotation BSpline Draws a B-Spline from a series of points
Point Inserts a single point Shapestring The ShapeString tool inserts a compound shape representing a text string at a given point in the current document
Facebinder Creates a new object from selected faces on existing objects Bezier Curve Draws a Bezier curve from a series of points
Move Moves or copies objects from one location to another Rotate Rotates objects by a certain angle around a point
Offset Offsets an object to a certain distance Trimex Trims, extends or extrudes an object
Upgrade Turns or joins objects into a higher-level object Downgrade Turns or separates objects into lower-level objects
Scale Scales objects in relation to a point Shape 2D View Creates a 2D object which is a flattened view of another object
Draft to Sketch Converts a Draft object to a Sketch and vice-versa Array Creates a polar or rectangular array from an object
Path Array Creates an array from an object by placing copies along a path Clone Creates linked copies of objects
Mirror Mirrors objects across a line

Skizzieren

Unglücklicherweise gibt es in FreeCAD wenigstens 3 Arbeitsbereiche mit 3 verschiedenen Namen, obwohl in diesen Bereichen mit ähnlichen Werkzeug-Sets ähnliche Arbeit, nämlich Technisches Zeichnen stattfindet. Sowohl die deutschen als auch die englischen Begriffe Zeichnen (Sketch/er), Entwerfen (Draft) und Körper-Entwurf (PartDesign) sind folglich auch keine selbstsprechenden unterschiedlichen Bezeichnungen. Zudem findet Zeichnen in 2D ebenfalls im Arbeitsbereich Architektur (Arch) statt. Anstatt der wörtlichen Übersetzung von Sketch/er ins Deutsche mit Skizzieren/ierer wird Zeichnen gewählt, weil nicht das Skizzieren im Sinne von Freihand-Zeichnen gemeint ist. In diesem Arbeitsbereich kommen die meisten in 2D-Zeichenprogrammen benutzten Werkzeuge ebenfalls zur Anwendung. Im Werkzeug-Set ist zusätzlich eine Gruppe von Werkzeugen enthalten, mit deren Hilfe der Entwurf in Position, Form und Abmessungen eindeutig erstellt wird (siehe auch Constraint im Glossar).

Werkzeug Beschreibung Werkzeug Beschreibung
Point Zeichnen eine Punkts Line Zeichnen einer Linie, bestimmt von beiden Endpunkten
Arc Zeichnen eines Kreisbogens, bestimmt von Mittelpunkt, Radius und relativem Anfangs- und Endwinkel Arc 3 points Zeichnen eines Kreisbogens, bestimmt von 3 auf ihm liegenden Punkten

(2 der 3 Punkte sind die Endpunkte des Kreisbogens)

Circle Zeichnen eines Kreises, bestimmt von Mittelpunkt und Radius Circle 3 points Zeichnen eines Kreises, bestimmt von 3 auf ihm liegenden Punkten
Ellipse Zeichnen einer Ellipse, bestimmt von Mittelpunkt und je einem Endpunkt der beiden Ellipsenachsen Ellipse 3 points Zeichnen einer Ellipse, bestimmt von beiden Endpunkten der großen und einem Endpunkt der kleinen Ellipsenachse
Arc of ellipse Zeichnen eines elliptischen Bogens, bestimmt von Mittelpunkt, einem Endpunkt der großen Ellipsenachse und Anfangs- und Endpunkt Polyline Zeichnen eines aus mehreren geraden Linien bestehenden Linienzugs
Rectangle Zeichnen eines Rechtecks, bestimmt von zwei diagonal gegenüber liegenden Eckpunkten Triangle Zeichnen eines gleichseitigen Dreiecks, bestimmt vom Umkreis
Square Zeichnen eines gleichseitigen Dreiecks, bestimmt vom Innenkreis Pentagon Zeichnen eines gleichseitigen Vielecks, vom Umkreis bestimmt
Hexagon Zeichnen eines gleichseitigen Sechsecks, vom Umkreis bestimmt Heptagon Zeichnen eines gleichseitigen Siebenecks, vom Umkreis bestimmt
Octagon Zeichnen eines gleichseitigen Achtecks, vom Umkreis bestimmt Slot Zeichnen eines Ovals, vom Mittelpunkt, einem Halbkreis und dem äußersten Punkt des anderen Halbkreises bestimmt
Fillet Erzeugen einer Rundung an einer von zwei Linien gebildeten Ecke Trimming Kürzen einer Linie, eines Kreises oder eines Bogens mithilfe einer/s überlagernden Linie, Kreises oder Bogens
External geometry Creates an edge linked to external geometry Construction mode Toggles an element to/from construction mode. A construction object will not be used in a 3D geometry operation and is only visible while editing the Sketch that contains it
Point on point Affixes a point onto (coincident with) one or more other points. Point on object Affixes a point onto another object such as a line, arc, or axis.
Vertical Constrains the selected lines or polyline elements to a true vertical orientation. More than one object can be selected before applying this constraint. Horizontal Constrains the selected lines or polyline elements to a true horizontal orientation. More than one object can be selected before applying this constraint.
Parallel Constrains two or more lines parallel to one another. Perpendicular Constrains two lines perpendicular to one another, or constrains a line perpendicular to an arc endpoint.
Tangent Creates a tangent constraint between two selected entities, or a co-linear constraint between two line segments. Equal length Constrains two selected entities equal to one another. If used on circles or arcs their radii will be set equal.
Symmetric Constrains two points symmetrically about a line, or constrains the first two selected points symmetrically about a third selected point. Lock Constrains the selected item by setting vertical and horizontal distances relative to the origin, thereby locking the location of that item
Horizontal distance Fixes the horizontal distance between two points or line endpoints. If only one item is selected, the distance is set to the origin. Vertical distance Fixes the vertical distance between 2 points or line endpoints. If only one item is selected, the distance is set to the origin.
Distance Defines the distance of a selected line by constraining its length, or defines the distance between two points by constraining the distance between them. Radius Defines the radius of a selected arc or circle by constraining the radius.
Internal anglr Defines the internal angle between two selected lines. Snell's law Constrains two lines to obey a refraction law to simulate the light going through an interface
Internal alignment Aligns selected elements to selected shape (e.g. a line to become major axis of an ellipse) Map sketch Maps a sketch to the previously selected face of a solid
Merge Merge two or more sketches Mirror Mirrors selected elements of a sketch

Part Design

The Part Design Workbench contains advanced tools to build solid parts. It also contains all the tools from the sketcher. Since it can only produce solid shapes (the rule number one of Part Design), it is the main workbench to use when designing pieces (parts) to be manufactured or 3D-printed, as you will always obtain a printable object.

Tool Description Tool Description
Pad Extrudes a solid object from a selected sketch Pocket Creates a pocket from a selected sketch. The sketch must be mapped to an existing solid object's face
Revolution Creates a solid by revolving a sketch around an axis Groove Creates a groove by revolving a sketch around an axis
Fillet Fillets (rounds) edges of an object Chamfer Chamfers edges of an object
Draft Applies angular draft to faces of an object Mirrored Mirrors features on a plane or face
Linear pattern Creates a linear pattern of features Polar pattern Creates a polar pattern of features
Scaled Scales features to a different size Multitransform Allows creating a pattern with any combination of the other transformations
Shaft wizard Generates a shaft from a table of values and allows to analyze forces and moments Involute gear wizard Allows you to create several types of gears

Arch

The Arch Workbench contains tools to work with BIM projects (civil engineering and architecture). It also contains all the tools from the Draft workbench. The main use of the Arch Workbench is to create BIM objects or give BIM attributes to objects built with other workbenches, in order to export them to IFC.

Tool Description Tool Description
Wall Creates a wall from scratch or using a selected object as a base Structure Creates a structural element from scratch or using a selected object as a base
Rebar Creates a reinforcement bar in a selected structural element Floor Creates a floor including selected objects
Building Creates a building including selected objects Site Creates a site including selected objects
Window Creates a window using a selected object as a base Section plane Adds a section plane object to the document
Axis Adds an axes system to the document Roof Creates a sloped roof from a selected face
Space Creates a space object in the document Stairs Creates a stairs object in the document
Panel Creates a panel object from a selected 2D object Frame Creates a frame object from a selected layout
Equipment Creates an equipment or furniture object Material Attributes a material to selected objects
Schedule Creates different types of schedules Cut plane Cut an object according to a plan
Add Adds objects to a component Remove Subtracts or removes objects from a component
Survey Enters or leaves surveying mode

Drawing

Development of the Drawing Workbench stopped in FreeCAD 0.16, and the new TechDraw Workbench aiming to replace it was introduced in v0.17. The Drawing Workbench may be removed in future releases. Use the TechDraw Workbench instead.

The Drawing Workbench handles the creation and manipulation of 2D drawing sheets, used for displaying views of your 3D work in 2D. These sheets can then be exported to 2D applications in SVG or DXF formats, to a PDF file or printed.

Tool Description Tool Description
New sheet Creates a new drawing sheet View Inserts a view of the selected object in the active drawing sheet
Annotation Adds an annotation to the current drawing sheet Clip Adds a clip group to the current drawing sheet
Open browser Opens a preview of the current sheet in the browser Ortho views Automatically creates orthographic views of an object on the current drawing sheet
Symbol Adds the contents of a SVG file as a symbol on the current drawing sheet Draft view Inserts a special Draft view of the selected object in the current drawing sheet
Save Saves the current sheet as a SVG file

Other built-in workbenches

Although the above summarizes the most important tools of FreeCAD, many more workbenches are available, among them:

  • The Mesh Workbench allows to work with polygon meshes. Although meshes are not the preferred type of geometry to work with in FreeCAD, because of their lack of precision and support for curves, meshes still have a lot of uses, and are fully supported in FreeCAD. The Mesh Workbench also offers a number of Part-to-Mesh and Mesh-to-Part tools.
  • The Raytracing Workbench offers tools to interface with external renderers such as povray or luxrender. Right from inside FreeCAD, this workbench allows you to produce high-quality renderings from your models.
  • The Spreadsheet Workbench permits the creation and manipulation of spreadsheet data, that can be extracted from FreeCAD models. Spreadsheet cells can also be referenced in many areas of FreeCAD, allowing to use them as master data structures.
  • The FEM Workbench deals with Finite Elements Analysis, and permits the performing of pre- and post-processing FEM calculations and to display the results graphically.

Externe Arbeitsbereiche

A number of other very useful workbenches produced by FreeCAD community members also exist. Although they are not included in a standard FreeCAD installation,they are easy to install as plug-ins. They are all referenced in the FreeCAD-addons repository. Among the most developed are:

  • The Drawing Dimensioning Workbench offers many new tools to work directly on Drawing Sheets and allow you to add dimensions, annotations and other technical symbols with great control over their aspect. The Drawing Dimensioning Workbench is no longer maintained.
  • The Fasteners Workbench offers a wide range of ready-to-insert fasteners objects like screws, bolts, rods, washers and nuts. Many options and settings are available.
  • The A2plus workbench offers a series of tools to mount and work with assemblies.

Weiterlesen