Macro FCInfo/cs: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
 
(111 intermediate revisions by 4 users not shown)
Line 1: Line 1:
<languages/>
{{Macro|Icon=FCInfo|Name=Macro_FCInfo|Description=Dává řadu informací o tvaru.|Author=Mario52}}

{{Macro
|Name=Macro FCInfo
|Icon=FCInfo.png
|Description=Gives information about the selected shape and can display a conversion of length, inclination (degrees, radians, grades, percent), area, volume and weight in different units (metric and imperial). The macro now also works for the elements of a sketch in edit mode.
<br />French Version [https://gist.githubusercontent.com/mario52a/6afc64081c4eb8be3b93/raw/da448b70d27ee82c496b04ffb68f5224c653bed1/FCInfo_fr_Ver_1-28c-rmu_Docked.FCMacro Version française]
|Author=Mario52
|Download=[https://wiki.freecad.org/images/5/53/FCInfo.png ToolBar Icon]
|Version=1.28c
|Date=2023/10/30
|FCVersion=All
|SeeAlso=[[Arch_Survey|Arch Survey]], [[Macro_SimpleProperties|Macro SimpleProperties]], [[Macro_FCInfoGlass|Macro FCInfoGlass]]
}}

==Description==


<div class="mw-translate-fuzzy">
==Popis==
Dává řadu informací o vybraném tvaru a může zobrazit konverzi délky, sklonu (stupně, radiány, procenta) tělesa, povrchu, objemu a váhy tvaru s měrnou hmotností vybranou v různých jednotkách hmotnosti mezinárodních i Anglo-Saských.
Dává řadu informací o vybraném tvaru a může zobrazit konverzi délky, sklonu (stupně, radiány, procenta) tělesa, povrchu, objemu a váhy tvaru s měrnou hmotností vybranou v různých jednotkách hmotnosti mezinárodních i Anglo-Saských.
</div>


{{Codeextralink|https://gist.githubusercontent.com/mario52a/8d40ab6c018c2bde678f/raw/c18679d096d168133e6f9e914774b3ba06ff6dc9/FCInfo_en_Ver_1-28c-rmu_Docked.FCMacro}}


[[File:Macro_FCInfo_00_en.png|480px|FCInfo]]
[[File:Macro_FCInfo_00_en.png|480px]]
{{Caption|FCInfo}}


===Utilisation===
==Usage==
Select an object or launch the application and select an object, and a series of informations appear.
His calculations based on unity of FreeCAD, which is the '''mm''' to each new selection, the length unit always comes back on '''mm''' and angle on '''decimal degrees'''.
*{{KEY|Read}} : Open a file '''.FCInfo'''
*{{KEY|Save}} : Save a file '''.FCInfo'''
*{{KEY|Exit}} : Exit the macro and delete it from memory
*{{KEY|Ref}} : Refresh the display of data in report view


<div class="mw-translate-fuzzy">
Když makro jednou spustíte, zůstává aktivní a okno zůstává viditelné. Makro lze ukončit stisknutím {{KEY|Exit}}. Když okno zavřte křížkem (vpravo nahoře), makro zůstává v paměti a data se zobrazují v "reportovacím pohledu" FreeCADu.
===Použití===
Vyberete objekt nebo spustíte aplikaci a vyberete objekt a zobrazí se řada informací.
Jeho výpočty založené na jednotce FreeCADu, což je '''mm''' pro kažbý nový výběr, vrací vždy délku v '''mm''' a úhel v '''dekadických stupních'''.


[[File:Macro FCInfo 06.png|200px|left|upper window]][[File:Macro FCInfo 07.png|200px|lower window]]
</div>

<div class="mw-translate-fuzzy">
{{clear}}
'''Sector 1: Document'''
* Název dokumentu
* Označení objektu
* Interní název objektu
* Název dílčího objektu
* Typ objektu
</div>


===Sector 1: Document===

[[File:Macro_FCInfo_Document_00.png|FCInfo Document]]

*Document name
*Label and internal name of the object
*Internal Name of the object
*Sub element name and type of the object
*Type of the object
''(you can checked to {{false}} the variable '''switch_setVisible_GBox_001_Document''' for hidden the Box)''

<span id="Sector_2:_Coordinates_click_mouse"></span>
<div class="mw-translate-fuzzy">
'''Sector 2: Coordinates click mouse'''
* Souřadnice X, Y a Z kliknutím myší
* Tlačítko vytváří na bodové, osové, rovinné, kopírovací vektorové formě osy '' 'FreeCAD.Vector (-24.0, 240.0, 7.0)' ''
</div>

[[File:Macro_FCInfo_Coordinate_click_mouse_00.png|FCInfo Coordinate]]

*Coordinates X,Y and Z click to mouse
*The {{Button|button}} creates point, axis, plane, copy vector axis from '''FreeCAD.Vector(-24.0, 240.0, 7.0)'''
''(you can checked to {{false}} the variable '''switch_setVisible_GBox_002_Coordinate_Mouse''' for hidden the Box)''

===Sector 3: Color on point===

[[File:Macro_FCInfo_Color_on_point_00.png|FCInfo Color_on_point]]

<div class="mw-translate-fuzzy">
'''Sector 3: Value'''
* Délka objektu, je-li objekt obrys obličeje, zobrazí se velikost jednotky: <br /> km, hm, přehrada, m, dm, cm, '' 'mm' '', μm, fm, palec, propojení, noha, yard, bidélko, řetěz, furlong, míle, ligy, námořní. Je-li objekt kružnicí o jednu sekundu, zobrazí se políčkoEdit a zobrazí poloměr kružnice.
* Obvod tvaru
</div>

===Sector 4: Components Mesh===

[[File:Componant_Mesh_v_1-28.png|FCInfo Component Mesh]]

If the selection is a mesh object one new window '''''"Components"''''' is displayed and gives:

*Edges : number of edges {{LineEdit|9561}}.
*Faces : number of faces {{LineEdit|6374}}.
*Points : number of points {{LineEdit|3189}}.
''(you can checked to {{false}} the variable '''switch_setVisible_GBox_004_Object_Mesh''' for hidden the Box)''<br />

===Sector 5: Units===

[[File:Macro_FCInfo_Units_00.png|FCInfo Units]]

*{{ComboBox|mm}} : If the object is a face perimeter, length of the object is displayed. Unit size can be selected :<br />km, hm, dam, m, dm, cm, '''mm''', µm, nm, pm, fm, inch, link, foot, yard, perch, chain, furlong, mile, league, nautique.
*Length of the object : Length of the object or perimeter of the face {{LineEdit|10.0 mm}}.
*If the object is a circle, a second lineEdit '''Radius :''' is opened and display the radius and diameter of circle {{LineEdit|2.0 mm (dia. 4.0 mm)}}.
*Perimeter of the shape (12). Perimeter of the object and number of subObject (Edges) contained in the object {{LineEdit|120.0 mm}}.
''(you can checked to {{false}} the variable '''switch_setVisible_GBox_005_Value_Unit''' for hidden the Box)''

===Sector 6: Inclination===

[[File:Macro_FCInfo_Inclination_00.png|FCInfo Inclination]]

*'''Inclination of the object''' can be displayed in:
**decimal degree, ex: {{LineEdit|174.831872611°}}
**degree minute seconde, ex: {{LineEdit|174° 49' 54.741401''}}
**radian, ex: {{LineEdit|3.05139181449 rad}}
**grade, ex: {{LineEdit|194.257636235 gon}}
**percent, ex: 30° = {{LineEdit|57.74%}}
*'''Inclinations in planes XY, YZ, ZX''' and their coordinates
*'''Direction object''', {{LineEdit|Vector (0.0, 0.0, -10.0)}} give the direction of object. The calculate is : coord_1 - coord_2 = direction (or reverse)
**{{Button|Direction}} this button create a line in direction of the object.
*'''ValueAt(0)''', {{LineEdit|Vector (0.0, 0.0, 10.0)}} returns the 3D vector corresponding to a parameter value.
**{{Button|ValueAt(0)}} this button create a line in ValueAt direction of the object.
*'''NormalAt(0,0)''', {{LineEdit|Vector (0.0, 0.0, 1.0)}} returns the 3D vector corresponding to a parameter value.
**{{Button|NormalAt(0,0)}} this button create a line in NormalAt direction of the object.
''(you can checked to {{false}} the variable '''switch_setVisible_GBox_006_Inclination''' for hidden the Box)''

===Sector 7: Surface and Volume===

[[File:Macro_FCInfo_Surface_and_Volume_00.png|FCInfo Surface and Volume]]

*Surface of the form displayed, unit size can be selected. {{LineEdit|600.0 mm2}}
*Surface of the face displayed, unit size can be selected. {{LineEdit|0.0 mm2}}
*Volume of the form displayed, unit size can be selected. {{LineEdit|1000.0 mm3}}
*Unit , choice your unit.
*The {{ComboBox|gram}} unit mass can be chosen :<br /> ton,quintal, kg, hg, dag, '''gram''', dg, cg, mg, µg, ng, pg, fg, gr (grain), dr (drachm), oz (once), oz t (once troy),<br />lb t (livre troy), lb (livre av), st (stone), qtr (quarter), cwt (hundredweight), tonneau fr, ct.
*Weight of the form displayed, unit mass can be selected. {{LineEdit|2.7 g}}
*Density of the material in '''kg by dm3''' {{LineEdit|2.7000 kg (by dm3)}}
*Material {{ComboBox|Metal Nickel (Ni),8.27,10.0,adapt Price}}
**In beginning the macro search the file '''FCInfo_material.txt''', if the file not exist, one file FCInfo_material.txt is created.
**The file is created with 10 types of material saved in this format.
***'''Title of material , Density on dm3 , Price on dm3 , text info on choice'''
***''(4 fields separate by coma)''
***Liquid Water (H2o),1,10.0,adapt Price
***Mater Beton,2.4,10.0,adapt Price
***Metal Aluminium (Al),2.7,10.0,adapt Price
***Metal Copper (Cu),8.96,10.0,adapt Price
***Metal Gold (Au),19.3,10.0,Gratis
***Metal Iron (Fe),7.87,10.0,adapt Price
***Metal Lead (Pb),11.35,10.0,adapt Price
***Metal Magnesium (Mg),1.43,10.0,adapt Price
***Metal Nickel (Ni),8.27,10.0,adapt Price
***Metal Pewter (Sn),7.29,10.0,adapt Price
***Metal Platinum (Pt),21.45,10.0,adapt Price
***Metal Silver (Ag),10.5,10.0,adapt Price
***Metal Sodium (Na),0.97,10.0,adapt Price
***Metal Titanium (Ti),4.4,10.0,adapt Price
***Metal Zinc (Zn),7.1,10.0,adapt Price
***Wood Beechwood,0.8,10.0,adapt Price
***Wood MDF,0.75,10.0,adapt Price
***Wood Mahogany,0.6,10.0,adapt Price
***Wood Oak,0.7,10.0,adapt Price
***Wood White pine,0.4,10.0,adapt Price
*New material or editing {{LineEdit|Metal Nickel (Ni),8.27,10.0,adapt Price}}
**you can modify or edit one new material in this format:
**'''Title, Density on dm3, Price on dm3, text info on choice'''
**''(4 fields separate by coma)''
**''you can also edit the file in your favorite editor respecting the specific format''
**you can save the file in a path desired with the variable : '''seTMaterialSavePathName'''
**''by default the file is created in the macro path''
**{{Button|Delete 1/17}} : delete the field displayed
**{{Button|Save}} : save the modification or the new material
''(you can checked to {{false}} the variable '''switch_setVisible_GBox_007_Surface_and_Volume''' for hidden the Box)''

===Sector 8: Cost===

[[File:Macro_FCInfo_Cost_00.png|FCInfo Cost]]

*Cost total : cost total of the object selected
{{LineEdit|0.027 Eu}}
*Price (kg/dm3) : price of the material selected (''Metal Aluminium (Al),2.7,'''''10.0''''',adapt Price'')
{{SpinBox|10,0000 Eu (by Kg)}}<br />
''(you can checked to {{false}} the variable '''switch_setVisible_GBox_008_Cost_And_Price''' for hidden the Box)''

===Sector 9: BoundBox===

[[File:Macro_FCInfo_BoundBox_00.png|FCInfo BoundBox]]

*BoundBox gives extreme dimensions of the shape.
**maximum X length : {{LineEdit|10.0 mm}}
**maximum Y length : {{LineEdit|10.0 mm}}
**maximum Z length : {{LineEdit|10.0 mm}}
**diagonal length : {{LineEdit|17.3205 mm}}
**{{Button|Tracing}} : create 6 rectangles to dimensions of boundbox
**{{Button|Volume}} : create volume to dimensions of boundbox
**{{CheckBox|Text Dim.}} : create the dimension of the triangle ''(boundbox)''
**If the {{CheckBox|TRUE|Text Dim.}} is checked, the spinbox dimension of text {{SpinBox|3,000}} is operational for give your value ''(3.0 by default)''
''(you can checked to {{false}} the variable '''switch_setVisible_GBox_009_BoundBox''' for hidden the Box)''

===Sector 10: Center of:===

[[File:Macro_FCInfo_Center_of_00.png|FCInfo Center of...]]

*Center of the shape and these coordinates XYZ
*Center of mass and these coordinates XYZ
*The {{Button|buttons}} creates on point, axis, plane, copy vector axis form '''FreeCAD.Vector(-24.0, 240.0, 7.0)''' ''(see Sector 13)''
''(you can checked to {{false}} the variable '''switch_setVisible_GBox_010_Center_Mass''' for hidden the Box)''

===Sector 11: Inertia===

[[File:Macro_FCInfo_Inertia_00.png|FCInfo Inertia]]

*Moment of inertia and these coordinates length and weigth
*The button creates on point, axis, plane, copy vector axis form '''FreeCAD.Vector(-24.0, 240.0, 7.0)''' ''(see Sector 13)''
** action line 1 : {{LineEdit|x1}}, {{LineEdit|y1}}, {{LineEdit|z1}}, {{LineEdit|0.0}}
** action line 2 : {{LineEdit|x2}}, {{LineEdit|y2}}, {{LineEdit|z2}}, {{LineEdit|0.0}}
** action line 3 : {{LineEdit|x3}}, {{LineEdit|y3}}, {{LineEdit|z3}}, {{LineEdit|0.0}}
** action 4 diagonal : {{LineEdit|x1}}, {{LineEdit|y2}}, {{LineEdit|z3}}
same for length and weigth
*Determinant 1 : {{LineEdit|4629629629629.633}} computes the determinant of the matrix, in [https://en.wikipedia.org/wiki/Scientific_notation scientific value]
*Determinant 2 : {{LineEdit|4629629629629.6328125}} computes the determinant of the matrix, in decimal value
''(you can checked to {{false}} the variable '''switch_setVisible_GBox_011_Inertia''' for hidden the Box)''

===Sector 12: SpreadSheet===

[[File:Macro_FCInfo_Disabled_module_00.png|FCInfo Disabled]]

*{{CheckBox|Disabled module}} CheckBox for search or not all details of the object. If it is not checked, only the principal value is displayed.
*Vertexes and details of the shape (compt_Edge), (compt_Faces), (compt_Vector of the Face)
*Max 200 lines in the table, if there are more than 200 lines it appears '''(!+ 200)''' and the number of lines
*If the object is complicated with many objects, the time is long and the search is repeated with every mouse click. The write function in the spreadSheet included, decreases the display time for this it is disabled by default
*Full details can save be the {{Button|Save}} button in a file in CSV format and can be viewed the file in spreadsheet with the {{Button|Read}} or by an external spreadsheet as [https://www.libreoffice.org/ LibreOffice] [http://openoffice.apache.org/downloads.html OpenOffice] or other<br/>
''(you can checked to {{false}} the variable '''switch_setVisible_GBox_012_SpreadSheet''' for hidden the Box)''

===Sector 13: SpreadSheet creation===

[[File:Macro_FCInfo_SpreedSheet_00.png|FCInfo SpreedSheet]]

*{{Button|SpreadSheet}} : create a new spreadsheet in a document
*{{LineEdit|SpreadSheet}} : the current spreadsheet. if the spreadsheet does not exist one spreadsheet is created
*{{Button|Refresh}} : refresh the list of spreadsheet in document
*{{ComboBox|-}} : the spreadsheet(s) present in document
*{{Button|Read}} : read the data in a spreadsheet saved '''.FCInfo''' or txt, asc, csv
*{{Button|Save}} : save the data in disk in the form selected below '''.FCInfo''' or txt, asc, csv
*{{RadioButton|TRUE|Tabulation}} : the separator is Tabulation (by default)
*{{RadioButton|Comma}} : the separator is Comma
*{{RadioButton|Semicolon}} : the separator is Semicolon
*{{RadioButton|Space}} : the separator is Space

<div class="mw-translate-fuzzy">
Možnost uložit nebo přečíst tabulku s různým oddělovačem, tabulka, čárka, středník, prostor <br />
Tabulace jsou oddělovač pro modul FreeCAD spreadSheet <br />
Počet těchto čtyř oddělovačů se vypočítá pro pomoc, pokud není známo <br />
COMMA jsou starý (01.16 a dřívější) oddělovač maker FCInfo <br />
Nyní pro kompatibilitu s rozložením FreeCAD spreadSheet a od verze 01.17 je TABULACE implicitně oddělovač <br />
Chcete-li převést vaši starou tabulku FCInfo: Otevřete ji ve složce FCInfo a uložte ji pomocí možnosti Tabulace
</div>

===Sector 14: Main tools===

[[File:Macro_FCInfo_Main_00.png|FCInfo Main]]

*{{CheckBox|Info}} : if this CheckBox is checked, the informations are displayed in the report view window
*{{CheckBox|Point}} : if checked, one point is created in the coordinate displayed form : '''FreeCAD.Vector(-24.0, 240.0, 7.0)'''
*{{CheckBox|Axis}} : if checked, one axis is created in the coordinate displayed form : '''FreeCAD.Vector(-24.0, 240.0, 7.0)'''
*{{CheckBox|Plane}} : if checked, one axis plane is created in the coordinate displayed form : '''FreeCAD.Vector(-24.0, 240.0, 7.0)'''
*{{RadioButton|Clip-B0}} : None clipBoard
*{{RadioButton|Clip-B1}} : If checked the coordinate are copy in the clipBoard Form : '''FreeCAD.Vector(X.0, Y.0, Z.0)''' FreeCAD model
*{{RadioButton|Clip-B2}} : If checked the coordinate are copy in the clipBoard Form : '''X, Y, Z''' with Comma separator
*{{RadioButton|Clip-B3}} : If checked the coordinate are copy in the clipBoard Form : '''X Y Z''' as is with Space separator
*{{CheckBox|Left/Right}} : if this CheckBox is not checked, the window macro are displayed to right (default). If it is checked the window macro are displayed to left.<br> If the option is 1 mode fly ''(User parameter:BaseApp/Preferences/Macros/FCMmacros/FCInfo/'''seTPositionFlyRightLeft''')'' this button is not visible .
*{{SpinBox|4 (Decimales)}} : give the number of decimal displayed
*{{SpinBox|12 (Dim. texte)}} : give the dimensionof text in the macro
*{{Button|Forum}} : direction FCInfo forum tread ''(you must to be connected to internet)''
*{{Button|Wiki}} : direction Wiki FCInfo ''(you must to be connected to internet)''
*{{Button|Ref}} : refresh the display of data in report view
*{{Button|Exit}} : exit properly the macro ''(not use the red cross of the window)''
''(you can checked to {{false}} the variable '''switch_setVisible_GBox_014_Main_Tools''' for hidden the Box)''

<div class="mw-translate-fuzzy">
Po spuštění makra zůstane makro aktivní a okno zůstane viditelné. Chcete-li makro ukončit, stiskněte klávesu {{KEY|Exit}}. Pokud opustíte kříž, makro zůstane v paměti a data se objeví v zobrazení "sestavy" aplikace FreeCAD.
</div>

<div class="mw-translate-fuzzy">
<center>
<center>
<gallery widths="400" heights="200">
<gallery widths="400" heights="200">
Image:Macro_FCInfo_04.png|Docked to rigth,
Image:Macro_FCInfo_04.png|Zakotveno vpravo,
Image:Macro FCInfo 05.png|or left with Combo view and reachable by a tab, or not docked to the choice.
Image:Macro FCInfo 05.png|nebo ponecháno v zobrazení Combo a dosažitelné pomocí karty, nebo není zakotveno k výběru.
</gallery>
</gallery>
</center>
</center>
<br>
{{clear}}
{{clear}}
</div>


===Volby===
==Options==

====Použité jednotky====
<span id="The_unit_used"></span>
=====Délková jednotka:=====
<div class="mw-translate-fuzzy">
==Volby==
===Použité jednotky===
====Délková jednotka:====
km, hm, dam, m, dm, cm, '''mm''', µm, nm, pm, fm, inch(palec), link, foot(stopa), yard, perch, chain, furlong, mile, league, nautique.
km, hm, dam, m, dm, cm, '''mm''', µm, nm, pm, fm, inch(palec), link, foot(stopa), yard, perch, chain, furlong, mile, league, nautique.
</div>

====Length unit:====

km, hm, dam, m, dm, cm, '''mm''', µm, nm, pm, fm, inch, link, foot, yard, perch, chain, furlong, mile, league, nautique.

====Angle degrees :====


<div class="mw-translate-fuzzy">
=====Úhlové stupně :=====
====Úhlové stupně :====
#'''dekadické stupně''', např: 174.831872611°
#'''dekadické stupně''', např: 174.831872611°
#stupně minuty vteřiny, např.:<nowiki> 174° 49' 54.741401''</nowiki>
#stupně minuty vteřiny, např.:<nowiki> 174° 49' 54.741401''</nowiki>
Line 36: Line 310:
#grade, např.: 194.257636235 gon
#grade, např.: 194.257636235 gon
#procenta např.: 30° = 57.74%
#procenta např.: 30° = 57.74%
</div>


<div class="mw-translate-fuzzy">
Pochopení úhlů v zobrazení FCInfo.
Understanding of angles in FCInfo display.
<center>
<gallery widths="400" heights="200">
Image:Macro FCInfo 02.png|Understanding of angles in FCInfo display
Image:Macro FCInfo 03.gif|Understanding of angles in poucent in FCInfo display <br /> click twice to see the animation (the image must be in full screen)
</gallery>
</center>
{{clear}}
</div>

<center>
<gallery widths="400" heights="200">

Image:Macro FCInfo 02.png|Understanding of angles in FCInfo display
Image:Macro FCInfo 03.gif|Understanding of angles in percent in FCInfo display <br /> click twice to see the animation (the image must be in full screen)

</gallery>
</center>
{{clear}}


====Weight unit :====
<center> <gallery widths="400" heights="200"> Image:Macro FCInfo 02.png|Pochopení úhlů v zobrazení FCInfo Image:Macro FCInfo 03.png|Pochopení úhlů v procentech v zobrazení FCInfo </gallery> </center> <br /> {{clear}}


<div class="mw-translate-fuzzy">
=====Váhové jednotky :=====
====Váhové jednotky :====
ton, quintal, kg, hg, dag, '''gram''', dg, cg, mg, µg, ng, pg, gr (grain), dr (drachm), oz (once), oz t (once troy),<br />
ton, quintal, kg, hg, dag, '''gram''', dg, cg, mg, µg, ng, pg, fg, gr (grain), dr (drachm), oz (once), oz t (once troy),<br />
lb t (livre troy), lb (livre av), st (stone), qtr (quarter), cwt (hundredweight), tonneau fr, ct <br />
lb t (livre troy), lb (livre av), st (stone), qtr (quarter), cwt (hundredweight), tonneau fr, ct <br />
"spinBox" je nastaven na '''7,5''' kg, tj. průměrná měrná hmotnost oceli. Chcete-li jinou defaultní (přednastavenou) hodnotu, změňte hodnotu měrné hmotnosti na řádku 182
"spinBox" je nastaven na '''7,5''' kg, tj. průměrná měrná hmotnost oceli. Chcete-li jinou defaultní (přednastavenou) hodnotu, změňte hodnotu měrné hmotnosti na řádku 208
</div>


====FCInfo Configuration====
<syntaxhighlight>
global densite ; densite = 7.5 # (steel = 7.5 kg par dm3)
</syntaxhighlight>


*Location : '''Tools > Edit parameter > *User parameter:BaseApp/Preferences/Macros/FCMmacros/FCInfo/'''
Soubor můůže být vytvořen tlačítkem {{KEY|Save}}. Takto je vytvořen soubor jako [https://fr.wikipedia.org/wiki/Comma-separated_values .csv] soubor, data mohou být prohlížena v tabulkovém editoru ve FreeCADu nebo Openoffice, LibreOffice...
*'''switchNotInfoOnBeginning''' '''#''' SetBool {{true}} or [{{false}}]
**Display or not this text information on run macro
***[{{false}}] = display this information
*** {{true}} = this Information is Not displayed On Beginning
*'''switchVersionSearch''' '''#''' SetBool {{true}} or [{{false}}]
**Search if one new version exist on run macro
*'''switchWarning''' '''#''' SetBool {{true}} or [{{false}}]
**Display or not display the window warning in case not good selection
*'''switchCreatePoint''' '''#''' SetBool {{true}} or [{{false}}]
**Check the Create point checkBox
*'''switchCreateAxis''' '''#''' SetBool {{true}} or [{{false}}]
**Check the Create axis checkBox
*'''switchCreatePlane''' '''#''' SetBool {{true}} or [{{false}}]
**Check the Create plane checkBox
*'''switchDisplayInfoObject''' '''#''' SetBool {{true}} or [{{false}}]
**Check the info checkBox
*'''switchClearDisplayReportView''' '''#''' SetBool {{true}} or [{{false}}]
**if switchClearDisplayReportView is {{true}} the ReportView is cleared
*'''seTWidgetPosition''' '''#''' SetBool {{true}} or [{{false}}]
**Check the Widget Position Left/Right checkBox
**if seTWidgetPosition [{{false}}] : if seTPositionFlyRightLeft = 2 = docked to Right
**if seTWidgetPosition {{true}} : if seTPositionFlyRightLeft = 3 = docked to Left
**if it is 1 the window macro is not docked
*'''switchBoundBoxCreateText''' '''#''' SetBool {{true}} or [{{false}}]
**Create the text dimension of the BoundBox
*'''seTBoundBoxTextHeigth''' '''#''' seTBoundBoxTextHeigth = 3.0
**Give the Heigth of the text dimension (independent of the seTTextHeigthValue)
*'''seTBoundBoxTextArround''' '''#''' seTBoundBoxTextArround = 3
**Give the arround of the text dimensions (independent of the seTDecimalValue)
*'''seTMemoClipBoard''' '''#''' SetInt [0], 1, 2, 3
**Give one value [0], 1, 2, 3 clipBoard
***[0] = desactivate the clipBoard
*** 1 = the data string is memorised to : FreeCAD.Vector( X, Y, Z )
*** 2 = the data string is memorised to : X, Y, Z
*** 3 = the data string is memorised to : X Y Z
*'''seTTextHeigthValue''' '''#''' SetInt 11
**Give one text heigth value of the macro
*'''seTDecimalValue''' '''#''' SetInt 4
**Give the number of decimal displayed
**If the number is -1 the total decimal value is displayed)
*'''seTMaterialCurrentIndex''' '''#''' SetInt 0
**Set the index of the ComboBox
*'''seTMaterialFileName''' '''#''' SetString FCInfo_material.txt
**Name of the material file
*'''seTMaterialSavePathName''' '''#''' SetString C:\...\Macro\FCInfo_material.txt
**Path name of the material file
*'''seTMaterialPrice''' '''#''' SetFloat
**Material price by Kg
*'''seTMaterialSuffixDevise''' '''#''' SetString
**Devise money
*'''seTMaterialSuffixCost''' '''#''' seTMaterialSuffixCost
**Suffix Devise cost
*'''seTMaterialCost''' '''#''' SetFloat
**Material cost
*'''seTDensiteValue''' '''#''' SetFloat 1.0
**Give the densite value
*'''seTDensiteDecimalNumber''' '''#''' SetInt 4
**Give the number of decimal for the densite value
*'''seTDensiteSingleStep''' '''#''' SetFloat 1.0
**Give the step for one click, by default 1.0 (possible 0.01 or ...)
*'''seTDensiteSuffixChain''' '''#''' SetString kg (by dm3)
**Choice your suffix string
*'''seTPositionFlyRightLeft''' '''#''' SetInt 2
**Choice your position, Fly, [Right], Left
*** 1 = the macro window is fly (not docked)
***[2] = the macro window is positioned to Right
*** 3 or other = the macro window is positioned to Left
*'''seTIndexUnitWeight''' '''#''' SetInt
**Set unit Weight index
*'''seTUnitSymbolMicro''' '''#''' U
**Set Symbol Micro
*'''seTUnitSymbolCube''' '''#''' 3
**Set Symbol Cube
*'''seTUnitSymbolCarre''' '''#''' 2
**Set Symbol Square
*'''seTIndexUnitLength''' '''#''' SetInt
**Set unit Length index
*'''setBSplineToByArcValue''' '''#''' SetFloat 0.00001
**Set unit for cut the BSpline for seack the radius on point given
*'''setMeshTopologyValue''' '''#''' SetFloat 0.1
**Set unit for create the Mesh to Shape
*'''switchBSplineCreateCircleConstructorAxis''' '''#'''SetBool {{true}} or [{{false}}]
**Display the axis of the circles (arcs) for create the BSpline
*'''switchBSplineCreateCircleConstructor''' '''#'''SetBool {{true}} or [{{false}}]
**Display the circles cretors for create the BSpline
*'''switchCreateLineDiVatNatOnClick''' '''#'''SetBool {{true}} or [{{false}}]
**Create the Line info on point (0,0,0) or on point mouse clicked (x,y,z) if it is {{true}}
**If it is {{true}} one '*' is displayed in front of text. EX: '*Direction'



===Script===
This switch ''(section GroupBox)'' allows you to view only the desired section(s) (just visual) {{False}} or {{True}}.
Copy the contents of the macro in a file named "FCInfo.FCMacro" (for Windows) in "C:\Program Files\FreeCAD0.13".<br />

All calculations are done without taking account of this option

* section GroupBox begin
**'''switch_setVisible_GBox_001_Document''' = True (1)
**'''switch_setVisible_GBox_002_Coordinate_Mouse''' = True (1)
**'''switch_setVisible_GBox_003_Color''' = True (1)
**'''switch_setVisible_GBox_004_Object_Mesh''' = True (1)
**'''switch_setVisible_GBox_005_Value_Unit''' = True (1)
**'''switch_setVisible_GBox_006_Inclination''' = True (1)
**'''switch_setVisible_GBox_007_Surface_and_Volume''' = True (1)
**'''switch_setVisible_GBox_008_Cost_And_Price''' = True (1)
**'''switch_setVisible_GBox_009_BoundBox''' = True (1)
**'''switch_setVisible_GBox_010_Center_Mass''' = True (1)
**'''switch_setVisible_GBox_011_Inertia''' = True (1)
**'''switch_setVisible_GBox_012_SpreadSheet''' = True (1)
**'''switch_setVisible_GBox_013_SpreadSheet_Creation''' = True (1)
**'''switch_setVisible_GBox_014_Main_Tools''' = True (1)
* section GroupBox end

<span id="Script"></span>
<div class="mw-translate-fuzzy">
===Skript===
Zkopírujte obsah tohoto makra do souboru nazvaného "FCInfo.FCMacro" (ve Windowsech) do "C:\Program Files\FreeCAD0.13".<br />
Nebo přímo do okna FreeCADu <br />
Ikona musí být ve stejném adresáři jako je makro pro Windows "C:\Program Files\FreeCAD0.13".<br />
Stáhněte umístění obrázků u ikon [[File:FCInfo.png|64px]] [[File:FCInfoSpreadsheet.png|64px]] a pravým tlačítkem je "Uložte jako" (neměňte jméno) (originál - Download image positioning on the icon [[File:FCInfo.png|64px]] [[File:FCInfoSpreadsheet.png|64px]] and then drag the mouse right click "save as" (do not change the name)) <br />
</div>

Copy the contents of the macro in a file named "FCInfo.FCMacro"
*Windows: the form is usually '''" drive:\Users\your_user_name\AppData\Roaming\FreeCAD\ "'''
*Ubuntu: the form is usually '''" /home/your_user_name/.FreeCAD "'''.<br />
Or, directly in the interface of FreeCAD <br />
Or, directly in the interface of FreeCAD <br />
The icon must be in the same directory as the macro for Windows "C:\Program Files\FreeCAD0.13".<br />
The icon must be in the same directory as the macro.<br />
Download image positioning on the icon [[File:FCInfo.png|64px]] [[File:FCInfoSpreadsheet.png|64px]] and then drag the mouse right click "save as" (do not change the name)<br />
Download image positioning on the icon [[File:FCInfo.png|64px]] [[File:FCInfoSpreadsheet.png|64px]] and then drag the mouse right click "save as" (do not change the name)<br />

'''PS: too long to be contained in the wiki page (for the time being the wiki pages accept only 64 KB) the macro code has been placed in the forum'''<br /><br />
<div class="mw-translate-fuzzy">
There are two versions available, they are identical but one is '''docked''' and the other is '''not docked''' in the case of a malfunction of the docked version.<br />
'''(PS: this is a false zip to clear the ".zip" extension that is there than to allow attachment to the forum)''' <br /><br />
'''PS: příliš dlouhá na to, aby byla obsažena na stránce wiki (zatím jsou stránky wiki pouze 64 KB) kód makra byl umístěn na fóru''' <br /> <br />
</div>
Dwnload the file '''docked to right''' [http://forum.freecadweb.org/download/file.php?id=4363 FCInfo_en_Ver_1-12_Docked.FCMacro.zip].<br /><br />

Dwnload the file '''not docked''' [http://forum.freecadweb.org/download/file.php?id=4364 FCInfo_en_Ver_1-12_No_Docked.FCMacro.zip].<br /><br />
<div class="mw-translate-fuzzy">
(Or '''[http://forum.freecadweb.org/viewtopic.php?f=10&t=3185&p=47748#p47748 On the forum.]''' )<br /><br />
Stáhněte soubor makra na podstavec '''ukotvený vpravo'''
'''PS:''' this macro uses '''getSelection()''' and the list of object begin to 1 ex: for a box '''Edge1 to Edge12'''
</div>
and the code in the console start at 0 ex: for a box '''Edge[0] to Edge[11]'''<br />

This is normal the counting on arrays/lists inside OpenCascade always starts at '''1 and not at 0'''
<div class="mw-translate-fuzzy">
{{CodeDownload|https://gist.github.com/mario52a/8d40ab6c018c2bde678f|last version Macro_FCInfo and the icons at the end of the page}}
</div>

<div class="mw-translate-fuzzy">
(Nebo '''[http://forum.freecadweb.org/viewtopic.php?f=10&t=3185&p=47748#p47748 On the forum.]''') <br /> <br />
'''PS:''' toto makro používá '''getSelection ()''' a seznam objektů začíná na 1 ex: pro pole '' 'Edge1 to Edge12'
a kód v konzole začíná na 0 ex: pro rámeček '''Edge [0] na Edge [11]''' <br />
To je normální počítání na matici / seznamy uvnitř OpenCascade vždy začíná na '''1 a ne na 0'''
</div>

===Limitations===

<div class="mw-translate-fuzzy">
===Omezení===
===Omezení===
Pro ukončení vždy používejte tlačítko {{KEY|Exit}}. Ukončení jiným způsobem zapříčiní, že program zůstane v paměti a běží a zobrazuje data v "reportovacím pohledu". Abyste uvolnili pamět, musíte ukončit celý FreeCAD.<br />
Pro ukončení vždy používejte tlačítko {{KEY|Exit}}. Ukončení jiným způsobem zapříčiní, že program zůstane v paměti a běží a zobrazuje data v "reportovacím pohledu". Abyste uvolnili pamět, musíte ukončit celý FreeCAD.<br />
V tabulce je viditelných pouze prvních 200 prvků objektu. Je-li jich v objektu více zobrazí se upozornění "'(! +200)" '. Kompletní seznam dat je viditelný v souboru uloženém pomocí tlačítka {{KEY|Save}}.<br />
V tabulce je viditelných pouze prvních 200 prvků objektu. Je-li jich v objektu více zobrazí se upozornění "'(! +200)" '. Kompletní seznam dat je viditelný v souboru uloženém pomocí tlačítka {{KEY|Save}}.<br />
</div>


<div class="mw-translate-fuzzy">
project:<br />
Pokud je makro okna po spuštění neviditelné, podívejte se do dolního okna:
<strike>read the file directly in a table.</strike> done<br />
</div>
<strike>matches the "Edges" and their coordinates</strike> done<br />
Association of a substance to its density<br />
<strike>inclination on the element rather than the global object</strike> done<br />
<strike>inlay right in the interface of FreeCAD</strike> done<br />


[[File:Macro FCInfo_08.png]]


[[File:FCInfo_begin_00.gif]]
{{clear}}

<div class="mw-translate-fuzzy">
projekt: <br />
<strike> si přečtěte soubor přímo v tabulce. </strike> provedeno <br />
<strike> odpovídá okraji a jejich souřadnic </strike>, které byly provedeny <br />
Sdružení látky s její hustotou <br />
<strike> sklon k prvku spíše než globální objekt </strike> proveden <br />
<strike> vložte přímo do rozhraní FreeCADu </strike> do <br />
</div>

==Version==

ver 1.28b 1.28c 2023/10/30 orthographe

ver 1.28 01/09/2023 modify variable name, possibility hidden each sector, save data spreadSheet in document, surface radius, add button webWiki and webForum

ver 1.27 2023/06/30 optimize the styleSheet, correct the left/right position and restore view after edition sketcher
{{Code|code=
self.PB_00_Decrement.setStyleSheet("background-color: white; border:2px solid rgb(215, 10, 22);") # bord white and red
}}
replaced by
{{Code|code=
self.PB_00_Decrement.setStyleSheet("QPushButton {background-color: white; border:2px solid rgb(215, 10, 22)};") # bord white and red
}}

<div class="mw-translate-fuzzy">
*ver 1.22 , 12/11/2020 : now the macro is totally uninstalled i use :
</div>

*ver 1.26b 20/02/2022 upgrade for detect BSpline in SubObject

*ver 1.26 06/02/2022 add info on Mesh and Points objects, decode colours, duplicate object or subObject, memorize the latest path and other preferences options

*ver 1.25e 18/12/2021 add info detailed to BSpline (ToByArcs) and info "sel[0].TypeId"
*ver 1.25d 12/12/2021 ---
*ver 1.25c 12/12/2021 correct "strAround((" by "str(Around(" and other little ...
*ver 1.25b 11/12/2021 correction error in change/modify new material and reorganization
*ver 1.25 10/12/2021 PySide2 and add comboBox materials
*ver 1.24 02/12/2021 add [https://forum.freecadweb.org/viewtopic.php?f=22&t=59852 adjustedGlobalPlacement] modified by edwilliams16 for placement with Body, boundbox tracing
*ver 1.23cb 25/11/2021 delete '''"import Sketcher * "''' create conflict with "'''open(OpenName, "r")'''" ??
Adding
{{Code|code=
FreeCAD.ActiveDocument.openTransaction(u"FCInfo") # memorise les actions (avec annuler restore)
FreeCAD.ActiveDocument.commitTransaction() # restore les actions (avec annuler restore)
#FreeCAD.ActiveDocument.abortTransaction() # abandonne les actions(avec annuler restore)
}}
*ver 1.25d, 13/12/2021 little correction material field uncomment the "'try...Except" !!!
*ver 1.25c, 12/12/2021 little correction new material
*ver 1.23b, 20/11/2021 little correction, add text info in beginning run macro, and ordinal the text code
*ver 1.23 , 19/11/2021 include icon in macro, number decimal displayed, text height, configure options in the Preference FC, correct info for elements of sketch in edit mode.
*ver 1.22 , 12/11/2020 : now the macro is totally uninstalled i use :
{{Code|code=
try:
self.window.setAttribute(QtCore.Qt.WA_DeleteOnClose, True) # destroy
self.window.deleteLater() # destroy
self.window.destroy() # destroy
except Exception:
None
}}

[https://forum.freecadweb.org/viewtopic.php?f=22&t=48013#p411508 How do i exit from FreeCAD instead of Python?]

instead:
{{Code|code=
self.window.hide()
}}
and i adding the possibility display or not the "Error Message" window "False" by default, if you wand activate the warning window go to :
{{Code|code=
FreeCAD >Menu >Tools >Edit parameters... >BaseApp/Preferences/Macros/FCMmacros/FCInfo > switchWarning
}}
<div class="mw-translate-fuzzy">
currently:<br />
currently:<br />
*ver 1.21-3.01 , 07/11/2019 # 07/11/2019 ver "01.21-3-rmu" replace character micro = "U", square = "2", cube = "3", degrees = " deg" see "https://forum.freecadweb.org/viewtopic.php?f=3&t=6005&start=70#p345819"
ver 1.12 , 10/03/2014 adding tooltip
*ver 1.21.01 (1.21-rmu) 30/05/2019 rmu change fixed positions to qt layouts grid.addWidget() by rmu75 see the rmu75 fork "https://gist.github.com/rmu75/b165147bd1c2f2659c014103793ae1d8"
ver 1.11 , 04/03/2014 adding µm, nm, pm, fm, µg, ng, pg, pourcent, fixed of grandeur carat <strike>"cd"</strike> in '''"ct"''', display of the label and internal name, fixed calculation of angles XY YZ ZX could give an error on a compound shape, window dockable in FreeCAD<br />
*ver 1.20 , 29/01/2018 optimization
ver 1.10.b , 19/11/2013 buttons outside the scrollbar and the dimensions of the window blocking<br />
*ver 1.19 , 20/01/2018 create checkBox for use detection all elements of the object if wanted or not , the macro is faster. Optimisation
*ver 1.18 , 19/12/2017 ...
*ver 1.17c , 14/12/2017 create plane with coordinate give in one project in other project and replace "FCInfo" by "__title__"
*ver 1.17b , 13/12/2017 little correction replace FCTreeView to FCInfo
*ver 1.17 , 12/12/2017 add upgrade Moment of inertia mm and kg by pinq [https://forum.freecadweb.org/viewtopic.php?t=23888 FCMacro and moment of inertia of assembly], and create plane, axis, point, and add options separator for spreadsheet
*ver 1.16 , 21/06/2017 add control height police (here PointSize 8) and checkbox for position the window to right or left<br />
*ver 1.15 , 19/12/2015 suppression PyQt4 option [http://forum.freecadweb.org/viewtopic.php?f=12&t=13541 see] , add checkBox for editing infos in report view<br />
*ver 1.14 , 04/08/2014 replace PyQt4 and PySide and correct tooltip not displayed cause on PySide and add fg<br />
*ver 1.13 , 27/07/2014 replace FCInfo_en_Ver_1-12_Docked.FCMacro to FCInfo_en_Ver_1-13_Docked.FCMacro accept PyQt4 and PySide<br />
*ver 1.12 , 10/03/2014 adding tooltip<br />
*ver 1.11 , 04/03/2014 adding µm, nm, pm, fm, µg, ng, pg, pourcent, fixed of grandeur carat <strike>"cd"</strike> in '''"ct"''', display of the label and internal name, fixed calculation of angles XY YZ ZX could give an error on a compound shape, window dockable in FreeCAD<br />
*ver 1.10.b , 19/11/2013 buttons outside the scrollbar and the dimensions of the window blocking<br />
(ver 1.10 , 18/11/2013 create scrollbar)<br />
(ver 1.10 , 18/11/2013 create scrollbar)<br />
ver 1.08.b , 10/11/2013 translation units in English, error correction to display the area of the faces listed in the table and replacement of the"'''print'''" by "'''App.Console.PrintMessage'''"<br />
*ver 1.08.b , 10/11/2013 translation units in English, error correction to display the area of the faces listed in the table and replacement of the"'''print'''" by "'''App.Console.PrintMessage'''"<br />
<strike>ver 1.09 , 04/11/2013 works perfectly on Windows and Linux (cause of errors on Linux the characters : ² ³ ° "ordinal not in range(128)") </strike><br />
<strike>ver 1.09 , 04/11/2013 works perfectly on Windows and Linux (cause of errors on Linux the characters : ² ³ ° "ordinal not in range(128)") </strike><br />
In a Linux distribution and in the case of an error of '''"ordinal not in range (128)"''' an alternative version exists on this page [[Macro_FCInfo_Alternate_Linux|Macro_FCInfo_Alternate_Linux]]<br />
In a Linux distribution and in the case of an error of '''"ordinal not in range (128)"''' an alternative version exists on this page [[Macro_FCInfo_Alternate_Linux|Macro_FCInfo_Alternate_Linux]]<br />
ver 1.08 , 24/10/2013 correction of high top "Faces" and "Edges" displaying 100 objects (in the saved file)<br />
*ver 1.08 , 24/10/2013 correction of high top "Faces" and "Edges" displaying 100 objects (in the saved file)<br />
ver 1.07 , 11/10/2013 matches the "Faces" and their coordinates.<br />
*ver 1.07 , 11/10/2013 matches the "Faces" and their coordinates.<br />
ver 1.06 , 22/09/2013 matches the "Edges" and their coordinates, inclination on the element rather than the global object<br />
*ver 1.06 , 22/09/2013 matches the "Edges" and their coordinates, inclination on the element rather than the global object<br />
ver 1.05 , 17/09/2013 added an icon for the spreadsheet, conversion barrel fr, affichage des dimensions overall instead of coordinates.<br />
*ver 1.05 , 17/09/2013 added an icon for the spreadsheet, conversion barrel fr, affichage des dimensions overall instead of coordinates.<br />
ver 1.04 , 11/09/2013: read the file directly in a table.<br />
*ver 1.04 , 11/09/2013: read the file directly in a table.<br />
ver 1.03 , 09/09/2013: clearer display in view report and replacement by "typeObject = sel[0].Shape.ShapeType"<br />
*ver 1.03 , 09/09/2013: clearer display in view report and replacement by "typeObject = sel[0].Shape.ShapeType"<br />
ver 1.02 , 7/09/2013 : small updates<br />
*ver 1.02 , 7/09/2013 : small updates<br />
ver 1.00 , 6/09/2013<br />
*ver 1.00 , 6/09/2013<br />
</div>


===Links===
<span id="Links"></span>
<div class="mw-translate-fuzzy">
You can share your comments on the forum [http://forum.freecadweb.org/viewtopic.php?f=10&t=3185 Info Workbench - Help with icons please.]<br />
==Odkazy==
Here another post of [http://forum.freecadweb.org/viewtopic.php?f=8&t=6005 FCInfo Macro]
Viz také [[Arch Survey/cs|Arch Survey]] [[File:Arch Survey.png|36px|Arch Survey]]
</div>

See Also: [[File:Arch_Survey.svg|36px|Arch Survey]] [[Arch_Survey|Arch Survey]]

Své připomínky můžete sdílet na fóru [http://forum.freecadweb.org/viewtopic.php?f=10&t=3185 Info Workbench - Help with icons please.]<br />
Zde je další příspěvek [http://forum.freecadweb.org/viewtopic.php?f=8&t=6005 FCInfo Macro]


{{clear}}
{{clear}}
<languages/>

Latest revision as of 11:55, 29 December 2023

Macro FCInfo

Description
Gives information about the selected shape and can display a conversion of length, inclination (degrees, radians, grades, percent), area, volume and weight in different units (metric and imperial). The macro now also works for the elements of a sketch in edit mode.


French Version Version française

Macro version: 1.28c
Last modified: 2023/10/30
FreeCAD version: All
Download: ToolBar Icon
Author: Mario52

Author
Mario52
Download
ToolBar Icon
Links
Macro Version
1.28c
Date last modified
2023/10/30
FreeCAD Version(s)
All
Default shortcut
None
See also
Arch Survey, Macro SimpleProperties, Macro FCInfoGlass

Description

Popis

Dává řadu informací o vybraném tvaru a může zobrazit konverzi délky, sklonu (stupně, radiány, procenta) tělesa, povrchu, objemu a váhy tvaru s měrnou hmotností vybranou v různých jednotkách hmotnosti mezinárodních i Anglo-Saských.

Temporary code for external macro link. Do not use this code. This code is used exclusively by Addon Manager. Link for optional manual installation: Macro


# This code is copied instead of the original macro code
# to guide the user to the online download page.
# Use it if the code of the macro is larger than 64 KB and cannot be included in the wiki
# or if the RAW code URL is somewhere else in the wiki.

from PySide import QtGui, QtCore

diag = QtGui.QMessageBox(QtGui.QMessageBox.Information,
    "Information",
    "This macro must be downloaded from this link\n"
    "\n"
    "https://gist.githubusercontent.com/mario52a/8d40ab6c018c2bde678f/raw/c18679d096d168133e6f9e914774b3ba06ff6dc9/FCInfo_en_Ver_1-28c-rmu_Docked.FCMacro" + "\n"
    "\n"
    "Quit this window to access the download page")

diag.setWindowFlags(QtCore.Qt.WindowStaysOnTopHint)
diag.setWindowModality(QtCore.Qt.ApplicationModal)
diag.exec_()

import webbrowser 
webbrowser.open("https://gist.githubusercontent.com/mario52a/8d40ab6c018c2bde678f/raw/c18679d096d168133e6f9e914774b3ba06ff6dc9/FCInfo_en_Ver_1-28c-rmu_Docked.FCMacro")


FCInfo

Usage

Použití

Vyberete objekt nebo spustíte aplikaci a vyberete objekt a zobrazí se řada informací. Jeho výpočty založené na jednotce FreeCADu, což je mm pro kažbý nový výběr, vrací vždy délku v mm a úhel v dekadických stupních.

upper window
upper window
lower window

Sector 1: Document

  • Název dokumentu
  • Označení objektu
  • Interní název objektu
  • Název dílčího objektu
  • Typ objektu


Sector 1: Document

FCInfo Document

  • Document name
  • Label and internal name of the object
  • Internal Name of the object
  • Sub element name and type of the object
  • Type of the object

(you can checked to false the variable switch_setVisible_GBox_001_Document for hidden the Box)

Sector 2: Coordinates click mouse

  • Souřadnice X, Y a Z kliknutím myší
  • Tlačítko vytváří na bodové, osové, rovinné, kopírovací vektorové formě osy 'FreeCAD.Vector (-24.0, 240.0, 7.0)'

FCInfo Coordinate

  • Coordinates X,Y and Z click to mouse
  • The button creates point, axis, plane, copy vector axis from FreeCAD.Vector(-24.0, 240.0, 7.0)

(you can checked to false the variable switch_setVisible_GBox_002_Coordinate_Mouse for hidden the Box)

Sector 3: Color on point

FCInfo Color_on_point

Sector 3: Value

  • Délka objektu, je-li objekt obrys obličeje, zobrazí se velikost jednotky:
    km, hm, přehrada, m, dm, cm, 'mm' , μm, fm, palec, propojení, noha, yard, bidélko, řetěz, furlong, míle, ligy, námořní. Je-li objekt kružnicí o jednu sekundu, zobrazí se políčkoEdit a zobrazí poloměr kružnice.
  • Obvod tvaru

Sector 4: Components Mesh

FCInfo Component Mesh

If the selection is a mesh object one new window "Components" is displayed and gives:

  • Edges : number of edges 9561.
  • Faces : number of faces 6374.
  • Points : number of points 3189.

(you can checked to false the variable switch_setVisible_GBox_004_Object_Mesh for hidden the Box)

Sector 5: Units

FCInfo Units

  • mm  : If the object is a face perimeter, length of the object is displayed. Unit size can be selected :
    km, hm, dam, m, dm, cm, mm, µm, nm, pm, fm, inch, link, foot, yard, perch, chain, furlong, mile, league, nautique.
  • Length of the object : Length of the object or perimeter of the face 10.0 mm.
  • If the object is a circle, a second lineEdit Radius : is opened and display the radius and diameter of circle 2.0 mm (dia. 4.0 mm).
  • Perimeter of the shape (12). Perimeter of the object and number of subObject (Edges) contained in the object 120.0 mm.

(you can checked to false the variable switch_setVisible_GBox_005_Value_Unit for hidden the Box)

Sector 6: Inclination

FCInfo Inclination

  • Inclination of the object can be displayed in:
    • decimal degree, ex: 174.831872611°
    • degree minute seconde, ex: 174° 49' 54.741401
    • radian, ex: 3.05139181449 rad
    • grade, ex: 194.257636235 gon
    • percent, ex: 30° = 57.74%
  • Inclinations in planes XY, YZ, ZX and their coordinates
  • Direction object, Vector (0.0, 0.0, -10.0) give the direction of object. The calculate is : coord_1 - coord_2 = direction (or reverse)
    • Direction this button create a line in direction of the object.
  • ValueAt(0), Vector (0.0, 0.0, 10.0) returns the 3D vector corresponding to a parameter value.
    • ValueAt(0) this button create a line in ValueAt direction of the object.
  • NormalAt(0,0), Vector (0.0, 0.0, 1.0) returns the 3D vector corresponding to a parameter value.
    • NormalAt(0,0) this button create a line in NormalAt direction of the object.

(you can checked to false the variable switch_setVisible_GBox_006_Inclination for hidden the Box)

Sector 7: Surface and Volume

FCInfo Surface and Volume

  • Surface of the form displayed, unit size can be selected. 600.0 mm2
  • Surface of the face displayed, unit size can be selected. 0.0 mm2
  • Volume of the form displayed, unit size can be selected. 1000.0 mm3
  • Unit , choice your unit.
  • The gram unit mass can be chosen :
    ton,quintal, kg, hg, dag, gram, dg, cg, mg, µg, ng, pg, fg, gr (grain), dr (drachm), oz (once), oz t (once troy),
    lb t (livre troy), lb (livre av), st (stone), qtr (quarter), cwt (hundredweight), tonneau fr, ct.
  • Weight of the form displayed, unit mass can be selected. 2.7 g
  • Density of the material in kg by dm3 2.7000 kg (by dm3)
  • Material Metal Nickel (Ni),8.27,10.0,adapt Price
    • In beginning the macro search the file FCInfo_material.txt, if the file not exist, one file FCInfo_material.txt is created.
    • The file is created with 10 types of material saved in this format.
      • Title of material , Density on dm3 , Price on dm3 , text info on choice
      • (4 fields separate by coma)
      • Liquid Water (H2o),1,10.0,adapt Price
      • Mater Beton,2.4,10.0,adapt Price
      • Metal Aluminium (Al),2.7,10.0,adapt Price
      • Metal Copper (Cu),8.96,10.0,adapt Price
      • Metal Gold (Au),19.3,10.0,Gratis
      • Metal Iron (Fe),7.87,10.0,adapt Price
      • Metal Lead (Pb),11.35,10.0,adapt Price
      • Metal Magnesium (Mg),1.43,10.0,adapt Price
      • Metal Nickel (Ni),8.27,10.0,adapt Price
      • Metal Pewter (Sn),7.29,10.0,adapt Price
      • Metal Platinum (Pt),21.45,10.0,adapt Price
      • Metal Silver (Ag),10.5,10.0,adapt Price
      • Metal Sodium (Na),0.97,10.0,adapt Price
      • Metal Titanium (Ti),4.4,10.0,adapt Price
      • Metal Zinc (Zn),7.1,10.0,adapt Price
      • Wood Beechwood,0.8,10.0,adapt Price
      • Wood MDF,0.75,10.0,adapt Price
      • Wood Mahogany,0.6,10.0,adapt Price
      • Wood Oak,0.7,10.0,adapt Price
      • Wood White pine,0.4,10.0,adapt Price
  • New material or editing Metal Nickel (Ni),8.27,10.0,adapt Price
    • you can modify or edit one new material in this format:
    • Title, Density on dm3, Price on dm3, text info on choice
    • (4 fields separate by coma)
    • you can also edit the file in your favorite editor respecting the specific format
    • you can save the file in a path desired with the variable : seTMaterialSavePathName
    • by default the file is created in the macro path
    • Delete 1/17 : delete the field displayed
    • Save : save the modification or the new material

(you can checked to false the variable switch_setVisible_GBox_007_Surface_and_Volume for hidden the Box)

Sector 8: Cost

FCInfo Cost

  • Cost total : cost total of the object selected

0.027 Eu

  • Price (kg/dm3) : price of the material selected (Metal Aluminium (Al),2.7,10.0,adapt Price)

10,0000 Eu (by Kg)
(you can checked to false the variable switch_setVisible_GBox_008_Cost_And_Price for hidden the Box)

Sector 9: BoundBox

FCInfo BoundBox

  • BoundBox gives extreme dimensions of the shape.
    • maximum X length : 10.0 mm
    • maximum Y length : 10.0 mm
    • maximum Z length : 10.0 mm
    • diagonal length : 17.3205 mm
    • Tracing : create 6 rectangles to dimensions of boundbox
    • Volume : create volume to dimensions of boundbox
    • Text Dim. : create the dimension of the triangle (boundbox)
    • If the Text Dim. is checked, the spinbox dimension of text 3,000 is operational for give your value (3.0 by default)

(you can checked to false the variable switch_setVisible_GBox_009_BoundBox for hidden the Box)

Sector 10: Center of:

FCInfo Center of...

  • Center of the shape and these coordinates XYZ
  • Center of mass and these coordinates XYZ
  • The buttons creates on point, axis, plane, copy vector axis form FreeCAD.Vector(-24.0, 240.0, 7.0) (see Sector 13)

(you can checked to false the variable switch_setVisible_GBox_010_Center_Mass for hidden the Box)

Sector 11: Inertia

FCInfo Inertia

  • Moment of inertia and these coordinates length and weigth
  • The button creates on point, axis, plane, copy vector axis form FreeCAD.Vector(-24.0, 240.0, 7.0) (see Sector 13)
    • action line 1 : x1, y1, z1, 0.0
    • action line 2 : x2, y2, z2, 0.0
    • action line 3 : x3, y3, z3, 0.0
    • action 4 diagonal : x1, y2, z3

same for length and weigth

  • Determinant 1  : 4629629629629.633 computes the determinant of the matrix, in scientific value
  • Determinant 2  : 4629629629629.6328125 computes the determinant of the matrix, in decimal value

(you can checked to false the variable switch_setVisible_GBox_011_Inertia for hidden the Box)

Sector 12: SpreadSheet

FCInfo Disabled

  • Disabled module CheckBox for search or not all details of the object. If it is not checked, only the principal value is displayed.
  • Vertexes and details of the shape (compt_Edge), (compt_Faces), (compt_Vector of the Face)
  • Max 200 lines in the table, if there are more than 200 lines it appears (!+ 200) and the number of lines
  • If the object is complicated with many objects, the time is long and the search is repeated with every mouse click. The write function in the spreadSheet included, decreases the display time for this it is disabled by default
  • Full details can save be the Save button in a file in CSV format and can be viewed the file in spreadsheet with the Read or by an external spreadsheet as LibreOffice OpenOffice or other

(you can checked to false the variable switch_setVisible_GBox_012_SpreadSheet for hidden the Box)

Sector 13: SpreadSheet creation

FCInfo SpreedSheet

  • SpreadSheet : create a new spreadsheet in a document
  • SpreadSheet : the current spreadsheet. if the spreadsheet does not exist one spreadsheet is created
  • Refresh : refresh the list of spreadsheet in document
  • -  : the spreadsheet(s) present in document
  • Read : read the data in a spreadsheet saved .FCInfo or txt, asc, csv
  • Save : save the data in disk in the form selected below .FCInfo or txt, asc, csv
  • Tabulation : the separator is Tabulation (by default)
  • Comma : the separator is Comma
  • Semicolon : the separator is Semicolon
  • Space : the separator is Space

Možnost uložit nebo přečíst tabulku s různým oddělovačem, tabulka, čárka, středník, prostor
Tabulace jsou oddělovač pro modul FreeCAD spreadSheet
Počet těchto čtyř oddělovačů se vypočítá pro pomoc, pokud není známo
COMMA jsou starý (01.16 a dřívější) oddělovač maker FCInfo
Nyní pro kompatibilitu s rozložením FreeCAD spreadSheet a od verze 01.17 je TABULACE implicitně oddělovač
Chcete-li převést vaši starou tabulku FCInfo: Otevřete ji ve složce FCInfo a uložte ji pomocí možnosti Tabulace

Sector 14: Main tools

FCInfo Main

  • Info : if this CheckBox is checked, the informations are displayed in the report view window
  • Point : if checked, one point is created in the coordinate displayed form : FreeCAD.Vector(-24.0, 240.0, 7.0)
  • Axis : if checked, one axis is created in the coordinate displayed form : FreeCAD.Vector(-24.0, 240.0, 7.0)
  • Plane : if checked, one axis plane is created in the coordinate displayed form : FreeCAD.Vector(-24.0, 240.0, 7.0)
  • Clip-B0 : None clipBoard
  • Clip-B1 : If checked the coordinate are copy in the clipBoard Form : FreeCAD.Vector(X.0, Y.0, Z.0) FreeCAD model
  • Clip-B2 : If checked the coordinate are copy in the clipBoard Form : X, Y, Z with Comma separator
  • Clip-B3 : If checked the coordinate are copy in the clipBoard Form : X Y Z as is with Space separator
  • Left/Right : if this CheckBox is not checked, the window macro are displayed to right (default). If it is checked the window macro are displayed to left.
    If the option is 1 mode fly (User parameter:BaseApp/Preferences/Macros/FCMmacros/FCInfo/seTPositionFlyRightLeft) this button is not visible .
  • 4 (Decimales)  : give the number of decimal displayed
  • 12 (Dim. texte)  : give the dimensionof text in the macro
  • Forum  : direction FCInfo forum tread (you must to be connected to internet)
  • Wiki : direction Wiki FCInfo (you must to be connected to internet)
  • Ref  : refresh the display of data in report view
  • Exit : exit properly the macro (not use the red cross of the window)

(you can checked to false the variable switch_setVisible_GBox_014_Main_Tools for hidden the Box)

Po spuštění makra zůstane makro aktivní a okno zůstane viditelné. Chcete-li makro ukončit, stiskněte klávesu Exit. Pokud opustíte kříž, makro zůstane v paměti a data se objeví v zobrazení "sestavy" aplikace FreeCAD.

Options

Volby

Použité jednotky

Délková jednotka:

km, hm, dam, m, dm, cm, mm, µm, nm, pm, fm, inch(palec), link, foot(stopa), yard, perch, chain, furlong, mile, league, nautique.

Length unit:

km, hm, dam, m, dm, cm, mm, µm, nm, pm, fm, inch, link, foot, yard, perch, chain, furlong, mile, league, nautique.

Angle degrees :

Úhlové stupně :

  1. dekadické stupně, např: 174.831872611°
  2. stupně minuty vteřiny, např.: 174° 49' 54.741401''
  3. radiány, např.: 3.05139181449 rad
  4. grade, např.: 194.257636235 gon
  5. procenta např.: 30° = 57.74%

Understanding of angles in FCInfo display.

Weight unit :

Váhové jednotky :

ton, quintal, kg, hg, dag, gram, dg, cg, mg, µg, ng, pg, fg, gr (grain), dr (drachm), oz (once), oz t (once troy),
lb t (livre troy), lb (livre av), st (stone), qtr (quarter), cwt (hundredweight), tonneau fr, ct
"spinBox" je nastaven na 7,5 kg, tj. průměrná měrná hmotnost oceli. Chcete-li jinou defaultní (přednastavenou) hodnotu, změňte hodnotu měrné hmotnosti na řádku 208

FCInfo Configuration

  • Location : Tools > Edit parameter > *User parameter:BaseApp/Preferences/Macros/FCMmacros/FCInfo/
  • switchNotInfoOnBeginning # SetBool true or [false]
    • Display or not this text information on run macro
      • [false] = display this information
      • true = this Information is Not displayed On Beginning
  • switchVersionSearch # SetBool true or [false]
    • Search if one new version exist on run macro
  • switchWarning # SetBool true or [false]
    • Display or not display the window warning in case not good selection
  • switchCreatePoint # SetBool true or [false]
    • Check the Create point checkBox
  • switchCreateAxis # SetBool true or [false]
    • Check the Create axis checkBox
  • switchCreatePlane # SetBool true or [false]
    • Check the Create plane checkBox
  • switchDisplayInfoObject # SetBool true or [false]
    • Check the info checkBox
  • switchClearDisplayReportView # SetBool true or [false]
    • if switchClearDisplayReportView is true the ReportView is cleared
  • seTWidgetPosition # SetBool true or [false]
    • Check the Widget Position Left/Right checkBox
    • if seTWidgetPosition [false] : if seTPositionFlyRightLeft = 2 = docked to Right
    • if seTWidgetPosition true  : if seTPositionFlyRightLeft = 3 = docked to Left
    • if it is 1 the window macro is not docked
  • switchBoundBoxCreateText # SetBool true or [false]
    • Create the text dimension of the BoundBox
  • seTBoundBoxTextHeigth # seTBoundBoxTextHeigth = 3.0
    • Give the Heigth of the text dimension (independent of the seTTextHeigthValue)
  • seTBoundBoxTextArround # seTBoundBoxTextArround = 3
    • Give the arround of the text dimensions (independent of the seTDecimalValue)
  • seTMemoClipBoard # SetInt [0], 1, 2, 3
    • Give one value [0], 1, 2, 3 clipBoard
      • [0] = desactivate the clipBoard
      • 1 = the data string is memorised to : FreeCAD.Vector( X, Y, Z )
      • 2 = the data string is memorised to : X, Y, Z
      • 3 = the data string is memorised to : X Y Z
  • seTTextHeigthValue # SetInt 11
    • Give one text heigth value of the macro
  • seTDecimalValue # SetInt 4
    • Give the number of decimal displayed
    • If the number is -1 the total decimal value is displayed)
  • seTMaterialCurrentIndex # SetInt 0
    • Set the index of the ComboBox
  • seTMaterialFileName # SetString FCInfo_material.txt
    • Name of the material file
  • seTMaterialSavePathName # SetString C:\...\Macro\FCInfo_material.txt
    • Path name of the material file
  • seTMaterialPrice # SetFloat
    • Material price by Kg
  • seTMaterialSuffixDevise # SetString
    • Devise money
  • seTMaterialSuffixCost # seTMaterialSuffixCost
    • Suffix Devise cost
  • seTMaterialCost # SetFloat
    • Material cost
  • seTDensiteValue # SetFloat 1.0
    • Give the densite value
  • seTDensiteDecimalNumber # SetInt 4
    • Give the number of decimal for the densite value
  • seTDensiteSingleStep # SetFloat 1.0
    • Give the step for one click, by default 1.0 (possible 0.01 or ...)
  • seTDensiteSuffixChain # SetString kg (by dm3)
    • Choice your suffix string
  • seTPositionFlyRightLeft # SetInt 2
    • Choice your position, Fly, [Right], Left
      • 1 = the macro window is fly (not docked)
      • [2] = the macro window is positioned to Right
      • 3 or other = the macro window is positioned to Left
  • seTIndexUnitWeight # SetInt
    • Set unit Weight index
  • seTUnitSymbolMicro # U
    • Set Symbol Micro
  • seTUnitSymbolCube # 3
    • Set Symbol Cube
  • seTUnitSymbolCarre # 2
    • Set Symbol Square
  • seTIndexUnitLength # SetInt
    • Set unit Length index
  • setBSplineToByArcValue # SetFloat 0.00001
    • Set unit for cut the BSpline for seack the radius on point given
  • setMeshTopologyValue # SetFloat 0.1
    • Set unit for create the Mesh to Shape
  • switchBSplineCreateCircleConstructorAxis #SetBool true or [false]
    • Display the axis of the circles (arcs) for create the BSpline
  • switchBSplineCreateCircleConstructor #SetBool true or [false]
    • Display the circles cretors for create the BSpline
  • switchCreateLineDiVatNatOnClick #SetBool true or [false]
    • Create the Line info on point (0,0,0) or on point mouse clicked (x,y,z) if it is true
    • If it is true one '*' is displayed in front of text. EX: '*Direction'


This switch (section GroupBox) allows you to view only the desired section(s) (just visual) false or true.

All calculations are done without taking account of this option

  • section GroupBox begin
    • switch_setVisible_GBox_001_Document = True (1)
    • switch_setVisible_GBox_002_Coordinate_Mouse = True (1)
    • switch_setVisible_GBox_003_Color = True (1)
    • switch_setVisible_GBox_004_Object_Mesh = True (1)
    • switch_setVisible_GBox_005_Value_Unit = True (1)
    • switch_setVisible_GBox_006_Inclination = True (1)
    • switch_setVisible_GBox_007_Surface_and_Volume = True (1)
    • switch_setVisible_GBox_008_Cost_And_Price = True (1)
    • switch_setVisible_GBox_009_BoundBox = True (1)
    • switch_setVisible_GBox_010_Center_Mass = True (1)
    • switch_setVisible_GBox_011_Inertia = True (1)
    • switch_setVisible_GBox_012_SpreadSheet = True (1)
    • switch_setVisible_GBox_013_SpreadSheet_Creation = True (1)
    • switch_setVisible_GBox_014_Main_Tools = True (1)
  • section GroupBox end

Skript

Zkopírujte obsah tohoto makra do souboru nazvaného "FCInfo.FCMacro" (ve Windowsech) do "C:\Program Files\FreeCAD0.13".
Nebo přímo do okna FreeCADu
Ikona musí být ve stejném adresáři jako je makro pro Windows "C:\Program Files\FreeCAD0.13".
Stáhněte umístění obrázků u ikon a pravým tlačítkem je "Uložte jako" (neměňte jméno) (originál - Download image positioning on the icon and then drag the mouse right click "save as" (do not change the name))

Copy the contents of the macro in a file named "FCInfo.FCMacro"

  • Windows: the form is usually " drive:\Users\your_user_name\AppData\Roaming\FreeCAD\ "
  • Ubuntu: the form is usually " /home/your_user_name/.FreeCAD ".

Or, directly in the interface of FreeCAD
The icon must be in the same directory as the macro.
Download image positioning on the icon and then drag the mouse right click "save as" (do not change the name)

PS: příliš dlouhá na to, aby byla obsažena na stránce wiki (zatím jsou stránky wiki pouze 64 KB) kód makra byl umístěn na fóru

Stáhněte soubor makra na podstavec ukotvený vpravo

(Nebo On the forum.)

PS: toto makro používá getSelection () a seznam objektů začíná na 1 ex: pro pole 'Edge1 to Edge12' a kód v konzole začíná na 0 ex: pro rámeček Edge [0] na Edge [11]
To je normální počítání na matici / seznamy uvnitř OpenCascade vždy začíná na 1 a ne na 0

Limitations

Omezení

Pro ukončení vždy používejte tlačítko Exit. Ukončení jiným způsobem zapříčiní, že program zůstane v paměti a běží a zobrazuje data v "reportovacím pohledu". Abyste uvolnili pamět, musíte ukončit celý FreeCAD.
V tabulce je viditelných pouze prvních 200 prvků objektu. Je-li jich v objektu více zobrazí se upozornění "'(! +200)" '. Kompletní seznam dat je viditelný v souboru uloženém pomocí tlačítka Save.

Pokud je makro okna po spuštění neviditelné, podívejte se do dolního okna:


projekt:
si přečtěte soubor přímo v tabulce. provedeno
odpovídá okraji a jejich souřadnic , které byly provedeny
Sdružení látky s její hustotou
sklon k prvku spíše než globální objekt proveden
vložte přímo do rozhraní FreeCADu do

Version

ver 1.28b 1.28c 2023/10/30 orthographe

ver 1.28 01/09/2023 modify variable name, possibility hidden each sector, save data spreadSheet in document, surface radius, add button webWiki and webForum

ver 1.27 2023/06/30 optimize the styleSheet, correct the left/right position and restore view after edition sketcher

self.PB_00_Decrement.setStyleSheet("background-color: white; border:2px solid rgb(215, 10, 22);")      # bord white and red

replaced by

self.PB_00_Decrement.setStyleSheet("QPushButton {background-color: white; border:2px solid rgb(215, 10, 22)};")      # bord white and red
  • ver 1.22 , 12/11/2020 : now the macro is totally uninstalled i use :
  • ver 1.26b 20/02/2022 upgrade for detect BSpline in SubObject
  • ver 1.26 06/02/2022 add info on Mesh and Points objects, decode colours, duplicate object or subObject, memorize the latest path and other preferences options
  • ver 1.25e 18/12/2021 add info detailed to BSpline (ToByArcs) and info "sel[0].TypeId"
  • ver 1.25d 12/12/2021 ---
  • ver 1.25c 12/12/2021 correct "strAround((" by "str(Around(" and other little ...
  • ver 1.25b 11/12/2021 correction error in change/modify new material and reorganization
  • ver 1.25 10/12/2021 PySide2 and add comboBox materials
  • ver 1.24 02/12/2021 add adjustedGlobalPlacement modified by edwilliams16 for placement with Body, boundbox tracing
  • ver 1.23cb 25/11/2021 delete "import Sketcher * " create conflict with "open(OpenName, "r")" ??

Adding

FreeCAD.ActiveDocument.openTransaction(u"FCInfo")    # memorise les actions (avec annuler restore)
FreeCAD.ActiveDocument.commitTransaction()           # restore les actions  (avec annuler restore)
#FreeCAD.ActiveDocument.abortTransaction()            # abandonne les actions(avec annuler restore)
  • ver 1.25d, 13/12/2021 little correction material field uncomment the "'try...Except" !!!
  • ver 1.25c, 12/12/2021 little correction new material
  • ver 1.23b, 20/11/2021 little correction, add text info in beginning run macro, and ordinal the text code
  • ver 1.23 , 19/11/2021 include icon in macro, number decimal displayed, text height, configure options in the Preference FC, correct info for elements of sketch in edit mode.
  • ver 1.22 , 12/11/2020 : now the macro is totally uninstalled i use :
try:
        self.window.setAttribute(QtCore.Qt.WA_DeleteOnClose, True)    # destroy
        self.window.deleteLater()                                     # destroy
        self.window.destroy()                                         # destroy
except Exception:
        None

How do i exit from FreeCAD instead of Python?

instead:

self.window.hide()

and i adding the possibility display or not the "Error Message" window "False" by default, if you wand activate the warning window go to :

FreeCAD >Menu >Tools >Edit parameters... >BaseApp/Preferences/Macros/FCMmacros/FCInfo > switchWarning

currently:

  • ver 1.21-3.01 , 07/11/2019 # 07/11/2019 ver "01.21-3-rmu" replace character micro = "U", square = "2", cube = "3", degrees = " deg" see "https://forum.freecadweb.org/viewtopic.php?f=3&t=6005&start=70#p345819"
  • ver 1.21.01 (1.21-rmu) 30/05/2019 rmu change fixed positions to qt layouts grid.addWidget() by rmu75 see the rmu75 fork "https://gist.github.com/rmu75/b165147bd1c2f2659c014103793ae1d8"
  • ver 1.20 , 29/01/2018 optimization
  • ver 1.19 , 20/01/2018 create checkBox for use detection all elements of the object if wanted or not , the macro is faster. Optimisation
  • ver 1.18 , 19/12/2017 ...
  • ver 1.17c , 14/12/2017 create plane with coordinate give in one project in other project and replace "FCInfo" by "__title__"
  • ver 1.17b , 13/12/2017 little correction replace FCTreeView to FCInfo
  • ver 1.17 , 12/12/2017 add upgrade Moment of inertia mm and kg by pinq FCMacro and moment of inertia of assembly, and create plane, axis, point, and add options separator for spreadsheet
  • ver 1.16 , 21/06/2017 add control height police (here PointSize 8) and checkbox for position the window to right or left
  • ver 1.15 , 19/12/2015 suppression PyQt4 option see , add checkBox for editing infos in report view
  • ver 1.14 , 04/08/2014 replace PyQt4 and PySide and correct tooltip not displayed cause on PySide and add fg
  • ver 1.13 , 27/07/2014 replace FCInfo_en_Ver_1-12_Docked.FCMacro to FCInfo_en_Ver_1-13_Docked.FCMacro accept PyQt4 and PySide
  • ver 1.12 , 10/03/2014 adding tooltip
  • ver 1.11 , 04/03/2014 adding µm, nm, pm, fm, µg, ng, pg, pourcent, fixed of grandeur carat "cd" in "ct", display of the label and internal name, fixed calculation of angles XY YZ ZX could give an error on a compound shape, window dockable in FreeCAD
  • ver 1.10.b , 19/11/2013 buttons outside the scrollbar and the dimensions of the window blocking

(ver 1.10 , 18/11/2013 create scrollbar)

  • ver 1.08.b , 10/11/2013 translation units in English, error correction to display the area of the faces listed in the table and replacement of the"print" by "App.Console.PrintMessage"

ver 1.09 , 04/11/2013 works perfectly on Windows and Linux (cause of errors on Linux the characters : ² ³ ° "ordinal not in range(128)")
In a Linux distribution and in the case of an error of "ordinal not in range (128)" an alternative version exists on this page Macro_FCInfo_Alternate_Linux

  • ver 1.08 , 24/10/2013 correction of high top "Faces" and "Edges" displaying 100 objects (in the saved file)
  • ver 1.07 , 11/10/2013 matches the "Faces" and their coordinates.
  • ver 1.06 , 22/09/2013 matches the "Edges" and their coordinates, inclination on the element rather than the global object
  • ver 1.05 , 17/09/2013 added an icon for the spreadsheet, conversion barrel fr, affichage des dimensions overall instead of coordinates.
  • ver 1.04 , 11/09/2013: read the file directly in a table.
  • ver 1.03 , 09/09/2013: clearer display in view report and replacement by "typeObject = sel[0].Shape.ShapeType"
  • ver 1.02 , 7/09/2013 : small updates
  • ver 1.00 , 6/09/2013

Odkazy

Viz také Arch Survey Arch Survey

See Also: Arch Survey Arch Survey

Své připomínky můžete sdílet na fóru Info Workbench - Help with icons please.
Zde je další příspěvek FCInfo Macro