Difference between revisions of "Macro CloneConvert/de"

32px Macro CloneConvert

Beschreibung
Creates a clone of the object and the converted in the chosen position and size (inch, mm, m, µm...).

Autor
mario52
None
Macro-Version
1.0
Datum der letzten Änderung
None
None
Standardverknüpfung
None
Siehe auch
None

Description

Creates a clone or copy of the object and the converted in the chosen position and size (inch, mm, m, µm...) or free. The base object is recognized in mm (FreeCAd base)

Uses

Run the macro, the XYZ settings, choose "Clone" or "Copy" a unit or one value of choice select your object, and click Ok button.

If no value is entered a copy or clone will be created without modification. If no object is selected the Ok button will be colored in red.

The value of the BoundingBox, Volume and Surface is diplayed in the Report view, in the case of Copy multiple object, the display will show BoundingBox 0.0.

The base is the mm example with a 1 mm cube of side :

Select in the comboBox inch, 1 inch = 25.4 mm , the fields "Scale free" automatically adjusts to 25.4 (the values ​​in "Scale-free" can be changed separately). Click Ok button, the clone created will have 25,4 mm x 25,4 mm x 25,4 mm

150% = 1,50 in the "Scale free" fields

104% = 1,04 in the "Scale free" fields

Inverse operation :

If you want to reduce an object ex: a cube 25.4 mm (1 inch) in cube 1 mm sides, use the following formula, 1 / 25.4 = 0.0393700 and enter the value 0,0393700 (with comma) in the Scale field XY and Z.

In a cube of 5 mm, made​​ 5 / 25.4 = 0.1968503 and enter the value 0,1968503 (with comma) in the Scale field XY and Z.

50% = 0,50 in the "Scale free" fields

4% = 0,04 in the "Scale free" fields

Predefined units are :

km, hm, dam, m, dm, cm, mm, µm, nm, inch, link, foot, yard, perch, chain, furlong, mile, league, nautique.

• Mode
• Clone : One clone of the objet(s) is create
• Copy  : One copy of the objet(s) is create
• Coordinate X : Move the copy to the Coordinate X selected
• Coordinate Y : Move the copy to the Coordinate Y selected
• Coordinate Z : Move the copy to the Coordinate Z selected
• Scale predefined
• Scale predefined : predefined scales in units, km, hm, dam, m, dm, cm, mm, µm, nm, inch, link, foot, yard, perch, chain, furlong, mile, league, nautique
or choose a free value in the Scale free field.
• Scale free
• Scale X : free scale , if the value is negative ( -10) , the object is scaled x 10 and will be reversed in the X axis, to reduce the shape give a decimal value (0,5)
• ... : This button align the YZ values on the value of X to have the same values ​​XYZ (or manually)
• Scale Y : free scale , if the value is negative ( -10) , the object is scaled x 10 and will be reversed in the Y axis, to reduce the shape give a decimal value (0,5)
• Scale Z : free scale , if the value is negative ( -10) , the object is scaled x 10 and will be reversed in the Z axis, to reduce the shape give a decimal value (0,5)
• Ok : the OK button validates and launches the command, if no object is selected the Ok button will be colored in red
• Reset : the Reset button puts all the values to zero
• Quit : the Quit button exit the macro

Script

Macro_CloneConvert.FCMacro

```# -*- coding: utf-8 -*-
# CloneConvert.py
# Cree un clone ou une copie de l'objet ou des objets selectionne(s) et le met e l'echelle de la grandeur choisie
# utilisation : lancer CloneConvert selectionnez un objet choisissez la grandeur et cliquez sur OK
#
# Creates a clone of one copy the selected object and updates the selected size range
# use: start CloneConvert select an object choose the size and click OK
#
#OS: Windows Vista
#Word size: 32-bit
#Version: 0.14.3700 (Git)
#Hash: 32f5aae0a64333ec8d5d160dbc46e690510c8fe1
#Python version: 2.6.2
#Qt version: 4.5.2
#Coin version: 3.1.0
#SoQt version: 1.4.1
#OCC version: 6.5.1
#
# ver 0.3 31/07/2014 PyQt4 + PySide

__title__ = "CloneConvert"
__author__ = "mario52"

try:
import PyQt4                     # PyQt4
from PyQt4 import QtCore, QtGui  # PyQt4
except Exception:
import PySide                    # PySide
from PySide import QtCore, QtGui # PySide
import Draft, Part, FreeCAD, math, PartGui, FreeCADGui
from math import sqrt, pi, sin, cos, asin
from FreeCAD import Base
from decimal import *
from Draft import *
from FreeCAD import Vector, Rotation, Placement, Console

try:
_fromUtf8 = QtCore.QString.fromUtf8
except AttributeError:
def _fromUtf8(s):
return s

try:
_encoding = QtGui.QApplication.UnicodeUTF8
def _translate(context, text, disambig):
return QtGui.QApplication.translate(context, text, disambig, _encoding)
except AttributeError:
def _translate(context, text, disambig):
return QtGui.QApplication.translate(context, text, disambig)

global surface     ; surface     = 0.0
global volume_     ; volume_     = 0.0
global boundBox_   ; boundBox_   = 0.0
global boundBoxLX  ; boundBoxLX  = 0.0
global boundBoxLY  ; boundBoxLY  = 0.0
global boundBoxLZ  ; boundBoxLZ  = 0.0
global boundBox_S  ; boundBox_S  = ""
global uniteM_X    ; uniteM_X    = 1.0
global uniteM_Y    ; uniteM_Y    = 1.0
global uniteM_Z    ; uniteM_Z    = 1.0
global uniteM      ; uniteM      = 1.0
global uniteMs     ; uniteMs     = "mm"   # default mm
global placement_X ; placement_X = 0.0
global placement_Y ; placement_Y = 0.0
global placement_Z ; placement_Z = 0.0
global oripl_X     ; oripl_X     = 0.0
global oripl_Y     ; oripl_Y     = 0.0
global oripl_Z     ; oripl_Z     = 0.0
global sel         ; sel         = ""
global cloneCopy   ; cloneCopy   = 1

class Ui_MainWindow(object):

def __init__(self, MainWindow):
#        path = FreeCAD.ConfigGet("AppHomePath")

global uniteMs

self.window = MainWindow
MainWindow.setObjectName(_fromUtf8("MainWindow"))
MainWindow.resize(230, 379)
self.centralWidget = QtGui.QWidget(MainWindow)
self.centralWidget.setObjectName(_fromUtf8("centralWidget"))
self.label = QtGui.QLabel(self.centralWidget)
self.label.setGeometry(QtCore.QRect(10, 10, 191, 16))
self.label.setAlignment(QtCore.Qt.AlignCenter)
self.label.setObjectName(_fromUtf8("label"))

self.groupBox = QtGui.QGroupBox(self.centralWidget)
self.groupBox.setGeometry(QtCore.QRect(10, 30, 211, 141))
self.groupBox.setObjectName(_fromUtf8("groupBox"))

self.doubleSpinBox = QtGui.QDoubleSpinBox(self.groupBox)
self.doubleSpinBox.setGeometry(QtCore.QRect(100, 50, 101, 22))
self.doubleSpinBox.setDecimals(7)
self.doubleSpinBox.setMinimum(-10000000.0)
self.doubleSpinBox.setMaximum(10000000.0)
self.doubleSpinBox.setSingleStep(1.0)
self.doubleSpinBox.setProperty("value", 0.0)
self.doubleSpinBox.setObjectName(_fromUtf8("doubleSpinBox"))
self.doubleSpinBox.valueChanged.connect(self.on_doubleSpinBox_valueChanged) #connection doubleSpinBox

self.label_2 = QtGui.QLabel(self.groupBox)
self.label_2.setGeometry(QtCore.QRect(10, 50, 91, 16))
self.label_2.setObjectName(_fromUtf8("label_2"))

self.label_3 = QtGui.QLabel(self.groupBox)
self.label_3.setGeometry(QtCore.QRect(10, 80, 91, 16))
self.label_3.setObjectName(_fromUtf8("label_3"))

self.doubleSpinBox_2 = QtGui.QDoubleSpinBox(self.groupBox)
self.doubleSpinBox_2.setGeometry(QtCore.QRect(100, 80, 101, 22))
self.doubleSpinBox_2.setDecimals(7)
self.doubleSpinBox_2.setMinimum(-10000000.0)
self.doubleSpinBox_2.setMaximum(10000000.0)
self.doubleSpinBox_2.setSingleStep(1.0)
self.doubleSpinBox_2.setProperty("value", 0.0)
self.doubleSpinBox_2.setObjectName(_fromUtf8("doubleSpinBox_2"))
self.doubleSpinBox_2.valueChanged.connect(self.on_doubleSpinBox_2_valueChanged) #connection doubleSpinBox_2

self.doubleSpinBox_3 = QtGui.QDoubleSpinBox(self.groupBox)
self.doubleSpinBox_3.setGeometry(QtCore.QRect(100, 110, 101, 22))
self.doubleSpinBox_3.setDecimals(7)
self.doubleSpinBox_3.setMinimum(-10000000.0)
self.doubleSpinBox_3.setMaximum(10000000.0)
self.doubleSpinBox_3.setSingleStep(1.0)
self.doubleSpinBox_3.setProperty("value", 0.0)
self.doubleSpinBox_3.setObjectName(_fromUtf8("doubleSpinBox_3"))
self.doubleSpinBox_3.valueChanged.connect(self.on_doubleSpinBox_3_valueChanged) #connection doubleSpinBox_3

self.label_4 = QtGui.QLabel(self.groupBox)
self.label_4.setGeometry(QtCore.QRect(10, 110, 91, 16))
self.label_4.setObjectName(_fromUtf8("label_4"))

self.radioButton.setGeometry(QtCore.QRect(10, 20, 71, 20))
self.radioButton.setToolTip(_translate("MainWindow", "Create a clone of the object(s)", None))

self.radioButton_2.setGeometry(QtCore.QRect(100, 20, 71, 20))
self.radioButton_2.setToolTip(_translate("MainWindow", "Create a copy of the object(s)", None))

self.groupBox_2 = QtGui.QGroupBox(self.centralWidget)
self.groupBox_2.setGeometry(QtCore.QRect(10, 170, 211, 51))
self.groupBox_2.setObjectName(_fromUtf8("groupBox_2"))

self.comboBox = QtGui.QComboBox(self.groupBox_2)
self.comboBox.setGeometry(QtCore.QRect(10, 20, 191, 22))
self.comboBox.setMinimumContentsLength(0)
self.comboBox.setObjectName(_fromUtf8("comboBox"))
self.comboBox.setToolTip(_translate("MainWindow",u"Select unit. . .", None))
QtCore.QObject.connect(self.comboBox, QtCore.SIGNAL("currentIndexChanged(QString)"), self.SIGNAL_comboBox_Changed)

self.groupBox_3 = QtGui.QGroupBox(self.centralWidget)
self.groupBox_3.setGeometry(QtCore.QRect(10, 220, 211, 111))
self.groupBox_3.setObjectName(_fromUtf8("groupBox_3"))

self.doubleSpinBox_4 = QtGui.QDoubleSpinBox(self.groupBox_3)
self.doubleSpinBox_4.setGeometry(QtCore.QRect(100, 20, 101, 22))
self.doubleSpinBox_4.setDecimals(7)
self.doubleSpinBox_4.setMinimum(-1000000)
self.doubleSpinBox_4.setMaximum(1000000.0)
self.doubleSpinBox_4.setSingleStep(1.0)
self.doubleSpinBox_4.setProperty("value", 1.0)
self.doubleSpinBox_4.setObjectName(_fromUtf8("doubleSpinBox_4"))
self.doubleSpinBox_4.setToolTip(_translate("MainWindow", "Scale free X multiplied by ...", None))
self.doubleSpinBox_4.valueChanged.connect(self.on_doubleSpinBox_4_valueChanged) #connection doubleSpinBox_4

self.doubleSpinBox_5 = QtGui.QDoubleSpinBox(self.groupBox_3)
self.doubleSpinBox_5.setGeometry(QtCore.QRect(100, 50, 101, 22))
self.doubleSpinBox_5.setDecimals(7)
self.doubleSpinBox_5.setMinimum(-1000000)
self.doubleSpinBox_5.setMaximum(1000000.0)
self.doubleSpinBox_5.setSingleStep(1.0)
self.doubleSpinBox_5.setProperty("value", 1.0)
self.doubleSpinBox_5.setObjectName(_fromUtf8("doubleSpinBox_5"))
self.doubleSpinBox_5.setToolTip(_translate("MainWindow", "Scale free Y multiplied by ...", None))
self.doubleSpinBox_5.valueChanged.connect(self.on_doubleSpinBox_5_valueChanged) #connection doubleSpinBox_5

self.doubleSpinBox_6 = QtGui.QDoubleSpinBox(self.groupBox_3)
self.doubleSpinBox_6.setGeometry(QtCore.QRect(100, 80, 101, 22))
self.doubleSpinBox_6.setDecimals(7)
self.doubleSpinBox_6.setMinimum(-1000000)
self.doubleSpinBox_6.setMaximum(1000000.0)
self.doubleSpinBox_6.setSingleStep(1.0)
self.doubleSpinBox_6.setProperty("value", 1.0)
self.doubleSpinBox_6.setObjectName(_fromUtf8("doubleSpinBox_6"))
self.doubleSpinBox_6.setToolTip(_translate("MainWindow", "Scale free Z multiplied by ...", None))
self.doubleSpinBox_6.valueChanged.connect(self.on_doubleSpinBox_6_valueChanged) #connection doubleSpinBox_6

self.label_5 = QtGui.QLabel(self.groupBox_3)
self.label_5.setGeometry(QtCore.QRect(10, 20, 53, 16))
self.label_5.setObjectName(_fromUtf8("label_5"))

self.label_6 = QtGui.QLabel(self.groupBox_3)
self.label_6.setGeometry(QtCore.QRect(10, 50, 53, 16))
self.label_6.setObjectName(_fromUtf8("label_6"))

self.label_7 = QtGui.QLabel(self.groupBox_3)
self.label_7.setGeometry(QtCore.QRect(10, 80, 53, 16))
self.label_7.setObjectName(_fromUtf8("label_7"))

self.pushButton_3 = QtGui.QPushButton(self.groupBox_3)
self.pushButton_3.setGeometry(QtCore.QRect(70, 20, 21, 21))
self.pushButton_3.setToolTip(_fromUtf8("Align the Scale YZ to X"))
self.pushButton_3.setObjectName(_fromUtf8("pushButton_3"))
self.pushButton_3.clicked.connect(self.on_pushButton03_clicked) #connection pushButton03 "..." align YZ to X

self.pushButton_2 = QtGui.QPushButton(self.centralWidget)
self.pushButton_2.setGeometry(QtCore.QRect(152, 340, 71, 28))
self.pushButton_2.setObjectName(_fromUtf8("pushButton_2"))
self.pushButton_2.clicked.connect(self.on_pushButton02_clicked) #connection pushButton02 "Quitter"

self.pushButton_1 = QtGui.QPushButton(self.centralWidget)
self.pushButton_1.setGeometry(QtCore.QRect(10, 340, 71, 28))
self.pushButton_1.setObjectName(_fromUtf8("pushButton_1"))
self.pushButton_1.setStyleSheet("background-color: Base")
self.pushButton_1.clicked.connect(self.on_pushButton01_clicked) #connection pushButton01 "OK"

self.pushButton = QtGui.QPushButton(self.centralWidget)
self.pushButton.setGeometry(QtCore.QRect(90, 340, 51, 28))
self.pushButton.setObjectName(_fromUtf8("pushButton"))
self.pushButton.clicked.connect(self.on_pushButton00_clicked)   #connection pushButton00 "Reset"

MainWindow.setCentralWidget(self.centralWidget)

self.retranslateUi(MainWindow)
QtCore.QMetaObject.connectSlotsByName(MainWindow)

def retranslateUi(self, MainWindow):
MainWindow.setWindowTitle(_translate("MainWindow", "CloneConvert", None))
try:
MainWindow.setWindowFlags(PyQt4.QtCore.Qt.WindowStaysOnTopHint)  # cette fonction met la fenetre en avant
except Exception:
MainWindow.setWindowFlags(PySide.QtCore.Qt.WindowStaysOnTopHint)  # cette fonction met la fenetre en avant
self.label.setText(_translate("MainWindow", "Object converter", None))
self.groupBox.setTitle(_translate("MainWindow", "Mode", None))
self.doubleSpinBox.setToolTip(_translate("MainWindow", "Place the new object to the X coordinate ", None))
self.label_2.setText(_translate("MainWindow", "Coordinate X", None))
self.label_3.setText(_translate("MainWindow", "Coordinate Y", None))
self.doubleSpinBox_2.setToolTip(_translate("MainWindow", "Place the new object to the Y coordinate", None))
self.doubleSpinBox_3.setToolTip(_translate("MainWindow", "Place the new object to the Z coordinate", None))
self.label_4.setText(_translate("MainWindow", "Coordinate Z", None))
self.groupBox_2.setTitle(_translate("MainWindow", "Scale predefined", None))
self.comboBox.setToolTip(_translate("MainWindow", "Convert your object to . . .", None))
self.comboBox.setCurrentIndex(6)
self.comboBox.setItemText(0, _translate("MainWindow", "km", None))         #km #        = 1000000
self.comboBox.setItemText(1, _translate("MainWindow", "hm", None))         #hm #        = 100000
self.comboBox.setItemText(2, _translate("MainWindow", "dam", None))        #dam#        = 10000
self.comboBox.setItemText(3, _translate("MainWindow", "m", None))          #m  #        = 1000
self.comboBox.setItemText(4, _translate("MainWindow", "dm", None))         #dm #        = 100
self.comboBox.setItemText(5, _translate("MainWindow", "cm", None))         #cm #        = 10
self.comboBox.setItemText(6, _translate("MainWindow", "mm", None))         #mm #        = 1        #####
self.comboBox.setItemText(7, _translate("MainWindow", "µm", None))         #µm # micro  = 0.001
self.comboBox.setItemText(8, _translate("MainWindow", "nm", None))         #nm # nano   = 0.000001
self.comboBox.setItemText(9, _translate("MainWindow", "inch", None))       #in # inch  pouce    = 25.400
self.comboBox.setItemText(10, _translate("MainWindow", "link", None))      #lk # link  chainon  = 201.168
self.comboBox.setItemText(11, _translate("MainWindow", "foot", None))      #ft # foot  pied     = 304.800
self.comboBox.setItemText(12, _translate("MainWindow", "yard", None))      #yd # yard  verge    = 914.400
self.comboBox.setItemText(13, _translate("MainWindow", "perch", None))     #rd # rod ou perch   perche   = 5029.200
self.comboBox.setItemText(14, _translate("MainWindow", "chain", None))     #ch # chain chaine   = 20116.800
self.comboBox.setItemText(15, _translate("MainWindow", "furlong", None))   #fur# furlong        = 201168
self.comboBox.setItemText(16, _translate("MainWindow", "mile", None))      #mi # mile           = 1609344
self.comboBox.setItemText(17, _translate("MainWindow", "league", None))    #lea# league lieue   = 4828032
self.comboBox.setItemText(18, _translate("MainWindow", "nautique", None))  #nmi# mile nautique  = 1852000
self.groupBox_3.setTitle(_translate("MainWindow", "Scale free", None))
self.label_5.setText(_translate("MainWindow", "Scale X", None))
self.label_6.setText(_translate("MainWindow", "Scale Y", None))
self.label_7.setText(_translate("MainWindow", "Scale Z", None))
self.pushButton_3.setToolTip(_translate("MainWindow", "Align the YZ scale values to X scale value ", None))
self.pushButton_3.setText(_translate("MainWindow", "...", None))
self.pushButton_2.setToolTip(_translate("MainWindow", "Quit the macro", None))
self.pushButton_2.setText(_translate("MainWindow", "Quit", None))
self.pushButton_1.setToolTip(_translate("MainWindow", "Ok for Convert or copy", None))
self.pushButton_1.setText(_translate("MainWindow", "Ok", None))
self.pushButton.setToolTip(_translate("MainWindow", "Reset", None))
self.pushButton.setText(_translate("MainWindow", "Reset", None))

def SIGNAL_comboBox_Changed(self,text):
global uniteM_X
global uniteM_Y
global uniteM_Z
global uniteM
global uniteMs

try:
text = unicode(text, 'ISO-8859-1').encode('UTF-8')  # PyQt4
except Exception:
text = text.encode('utf-8')                         # PySide

if text == "km":        #        = 1000000
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1000000.0
uniteMs= "km"
elif text == "hm":      #        = 100000
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 100000.0
uniteMs= "hm"
elif text == "dam":     #        = 10000
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 10000.0
uniteMs= "dam"
elif text == "m":       #        = 1000
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1000.0
uniteMs= "m"
elif text == "dm":      #        = 100
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 100.0
uniteMs= "dm"
elif text == "cm":      #        = 10
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 10.0
uniteMs= "cm"
elif text == "mm":      #        = 1  ###############################
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1.0
uniteMs= "mm"
elif text == "µm":      #        = 1000
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1.0/1000.0
uniteMs= u"µm"
elif text == "nm":      #        = 1000000
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1.0/1000000.0
uniteMs= u"nm"
elif text == "inch":    # inch   = 25.400
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 25.400
uniteMs= "in"
elif text == "link":    # link   = 201.168
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 201.168
uniteMs= "lk"
elif text == "foot":    # foot   = 304.800
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 304.800
uniteMs= "ft"
elif text == "yard":    # yard   = 914.400
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 914.400
uniteMs= "yd"
elif text == "perch":   #rd # rod   perche    = 5029.200
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 5029.200
uniteMs= "rd"
elif text == "chain":   # chain  = 20116.800
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 20116.800
uniteMs= "ch"
elif text == "furlong": # furlong= 201168
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 201168
uniteMs= "fur"
elif text == "mile":     # mile   = 1609344
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1609344
uniteMs= "mi"
elif text == "league":   # league = 4828032
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 4828032
uniteMs= "lea"
elif text == "nautique": # nautique = 1852000
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1852000
uniteMs= "nmi"
else:                    # mm = 1
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1.0
uniteMs= "mm"

self.doubleSpinBox_4.setProperty("value", uniteM_X)
self.doubleSpinBox_5.setProperty("value", uniteM_Y)
self.doubleSpinBox_6.setProperty("value", uniteM_Z)

def on_radioButton_clicked(self):                    # if checked then mode clone
global cloneCopy
cloneCopy = 1

def on_radioButton_2_clicked(self):                  # if checked then mode copy
global cloneCopy
cloneCopy = 0

def on_doubleSpinBox_valueChanged(self,value):       # doubleSpinbox X
global placement_X
placement_X = value

def on_doubleSpinBox_2_valueChanged(self,value):     # doubleSpinbox Y
global placement_Y
placement_Y = value

def on_doubleSpinBox_3_valueChanged(self,value):     #  doubleSpinbox Z
global placement_Z
placement_Z = value

def on_doubleSpinBox_4_valueChanged(self,value):     # doubleSpinbox free X
global uniteM_X
uniteM_X = value
if uniteM_X == 0:
uniteM_X = 1

def on_doubleSpinBox_5_valueChanged(self,value):     # doubleSpinbox free Y
global uniteM_Y
uniteM_Y = value
if uniteM_Y == 0:
uniteM_Y = 1

def on_doubleSpinBox_6_valueChanged(self,value):     #  doubleSpinbox free Z
global uniteM_Z
uniteM_Z = value
if uniteM_Z == 0:
uniteM_Z = 1

def on_pushButton03_clicked(self):                   # Bouton ... (align)
global uniteM_X
global uniteM_Y
global uniteM_Z
global uniteM
global uniteMs
uniteM_Y = uniteM_Z = uniteM_X
self.doubleSpinBox_5.setProperty("value", uniteM_X)
self.doubleSpinBox_6.setProperty("value", uniteM_X)

def on_pushButton00_clicked(self):                   # Bouton Reset
global uniteM_X
global uniteM_Y
global uniteM_Z
global uniteM
global uniteMs
global placement_X
global placement_Y
global placement_Z
global oripl_X
global oripl_Y
global oripl_Z
global cloneCopy

oripl_X = oripl_Y = oripl_Z = 0.0

self.pushButton_1.setToolTip(_translate("MainWindow", "Ok for Convert or copy", None))
self.pushButton_1.setStyleSheet("background-color: Base")

cloneCopy = 1

self.comboBox.setCurrentIndex(6)
self.doubleSpinBox.setProperty("value",   0.0)
self.doubleSpinBox_2.setProperty("value", 0.0)
self.doubleSpinBox_3.setProperty("value", 0.0)

placement_X = placement_Y = placement_Z = 0.0

self.doubleSpinBox_4.setProperty("value", 1.0)
self.doubleSpinBox_5.setProperty("value", 1.0)
self.doubleSpinBox_6.setProperty("value", 1.0)

uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1.0
uniteMs= "mm"
uniteM = 1

def on_pushButton01_clicked(self):                   # Bouton OK
global surface
global volume_
global boundBox
global boundBoxLX
global boundBoxLY
global boundBoxLZ
global boundBox_S
global uniteM_X
global uniteM_Y
global uniteM_Z
global uniteM
global uniteMs
global placement_X
global placement_Y
global placement_Z
global oripl_X
global oripl_Y
global oripl_Z
global sel

if len(sel) != 0:

self.pushButton_1.setToolTip(_translate("MainWindow", "Ok for Convert or copy", None))
self.pushButton_1.setStyleSheet("background-color: Base")

# boundinbox (dimensions hors tout)
try:
boundBox_ = sel[0].Shape.BoundBox # pour 1 seul objet, (le premier)
boundBoxLX = boundBox_.XLength
boundBoxLY = boundBox_.YLength
boundBoxLZ = boundBox_.ZLength
except:
boundBox_  = 0.0
boundBoxLX = 0.0
boundBoxLY = 0.0
boundBoxLZ = 0.0
boundBox_S = ""

# volume de tous les objets
volume_ = 0.0
try:
for i in range(len(sel)):
volume_ += sel[i].Shape.Volume
except:
volume_ = 0.0

# surface de tous les objets
surface = 0.0
try:
for i in range(len(sel)):
surface += sel[i].Shape.Area
except:
surface = 0.0

boundBox_S = "[X: "+str(boundBoxLX)+" mm] x [Y: "+str(boundBoxLY)+" mm] x [Z:"+str(boundBoxLZ)+" mm]"
App.Console.PrintMessage("Original boundBox : "+boundBox_S+"\r\n")
App.Console.PrintMessage("Original volume_  : "+str(volume_)+" mm3 ("+str(len(sel))+" element(s))"+"\r\n")
App.Console.PrintMessage("Original surface  : "+str(surface)+" mm2 ("+str(len(sel))+" element(s))"+"\r\n")
App.Console.PrintMessage("- - - - - - - - - -"+"\r\n")

oripl_X = sel[0].Placement.Base[0]
oripl_Y = sel[0].Placement.Base[1]
oripl_Z = sel[0].Placement.Base[2]

obj = ""
if cloneCopy == 1:       # clone ok
obj=Draft.clone(sel)
mess = "Clone"
###
if len(sel) > 1:     # one object
obj.Placement=App.Placement(App.Vector(placement_X,placement_Y,placement_Z), App.Rotation(App.Vector(0,0,1),0), App.Vector(0,0,0))
else:                # many objects
obj.Placement=App.Placement(App.Vector(oripl_X + placement_X,oripl_Y + placement_Y,oripl_Z + placement_Z), App.Rotation(sel[0].Placement.Rotation), App.Vector(0,0,0))
obj.Scale = (uniteM_X, uniteM_Y, uniteM_Z)
###
else:                     # copy ok
mess = "Copy "
obj = Draft.scale(sel,delta=App.Vector(uniteM_X, uniteM_Y, uniteM_Z),center=App.Vector(0,0,0),copy=True,legacy=True)
mydistance = FreeCAD.Vector(oripl_X + placement_X,oripl_Y + placement_Y,oripl_Z + placement_Z)
move(obj,mydistance)

####

# boundinbox (dimensions hors tout)
try:
boundBox_ = obj.Shape.BoundBox
boundBoxLX = boundBox_.XLength
boundBoxLY = boundBox_.YLength
boundBoxLZ = boundBox_.ZLength
except:
boundBox_  = 0.0
boundBoxLX = 0.0
boundBoxLY = 0.0
boundBoxLZ = 0.0

# volume
volume_ = 0.0
try:
volume_ = obj.Shape.Volume
except:
for i in range(len(obj)):
volume_ += obj[i].Shape.Volume

# surface
surface = 0.0
try:
surface = obj.Shape.Area
except:
for i in range(len(obj)):
surface += obj[i].Shape.Area

App.Console.PrintMessage("Convert mm in ' "+uniteMs+" ' (1 "+uniteMs+" = "+str(uniteM)+" mm)"+"\r\n")
App.Console.PrintMessage(mess + " boundBox_X  : "+str(boundBoxLX)+" mm"+"\r\n")
App.Console.PrintMessage(mess + " boundBox_Y  : "+str(boundBoxLY)+" mm"+"\r\n")
App.Console.PrintMessage(mess + " boundBox_Z  : "+str(boundBoxLZ)+" mm"+"\r\n")
App.Console.PrintMessage(mess + " volume      : "+str(volume_)+" mm3 ("+str(len(sel))+" element(s))"+"\r\n")#
App.Console.PrintMessage(mess + " surface     : "+str(surface)+" mm2 ("+str(len(sel))+" element(s))"+"\r\n")#
App.Console.PrintMessage("___________________"+"\r\n")
self.pushButton_1.setStyleSheet("background-color: green")

else:
self.pushButton_1.setStyleSheet("background-color: red")#red
self.pushButton_1.setToolTip(_translate("MainWindow", "Not object selected for Convert or copy", None))
FreeCAD.Console.PrintError("Select an object"+"\r\n")   #App.Console.PrintMessage
sel = ""

def on_pushButton02_clicked(self):                   # Bouton Quitter
App.Console.PrintMessage("End CloneConvert\r\n")
self.window.hide()

MainWindow = QtGui.QMainWindow()
ui = Ui_MainWindow(MainWindow)
MainWindow.show()```

Revision

11/08/2014 replace "AttributeError" to "Exception"

02/07/2014 ver. 0.3 = modified to operate PyQt4 and PySide

09/05/2014 ver. 0.2 = adding function "Copy"

Other languages:
Deutsch • ‎English • ‎français • ‎italiano