Macro Arch Axis System Repartition/it: Difference between revisions

From FreeCAD Documentation
(Created page with "===Link=== *Video [https://www.youtube.com/watch?v=jfDTkH9-I5Q Macro in action] *Macro_PartsLibrary FreeCAD Library *Github [https://github.com/ Macro ...")
No edit summary
Line 6: Line 6:
===Descrizione===
===Descrizione===


Questa macro fornisce un aiuto per creare un sistema di assi lungo una linea tramite una serie di parametri. È anche possibile creare un sistema strutturale direttamente da FreeCAD-Library.
Questa macro fornisce un aiuto per creare un sistema di assi lungo una linea tramite una serie di parametri. È anche possibile creare un Sistema strutturale direttamente dalla [[Macro_PartsLibrary/it|libreria delle Parti di FreeCAD]].


===Uso===
===Uso===

Revision as of 22:23, 20 December 2014

File:Text-x-python ArchAxisSystemRepartition

Descrizione
Crea un sistema di assi distribuiti lungo una linea.

Autore: rockn
Autore
rockn
Download
None
Link
Versione macro
1.0
Data ultima modifica
None
Versioni di FreeCAD
None
Scorciatoia
Nessuna
Vedere anche
Nessuno

ArchAxisSystemRepartition

Descrizione

Questa macro fornisce un aiuto per creare un sistema di assi lungo una linea tramite una serie di parametri. È anche possibile creare un Sistema strutturale direttamente dalla libreria delle Parti di FreeCAD.

Uso

  • Avviare la macro con o senza linea selezionata.
  • Appare una interfaccia grafica.
  • Impostare la lunghezza : se è selezionata una linea, impostando la lunghezza si aggiorna e si fissa la lunghezza della linea; se non c'è nessuna linea selezionata può essere definita la lunghezza.
  • Impostare la spaziatura regolare desiderata; il numero di divisioni e gli spazi prodotti vengono calcolati automaticamente.
  • O impostare il numero di divisioni desiderate; questo crea un corrispondente numero di suddivisioni senza spazi residui.
  • Scegliere se si desidera che lo spazio residuo sia posizionato all'inizio della ripartizione o alla fine o ripartito in ugual modo su entrambi i lati.
  • Se volete uno spazio all'inizio della riga, è possibile impostare un offset (nella direzione di fine linea).
  • Se volete uno spazio alla fine della riga, è possibile impostare un offset (nella direzione di inizio linea).
  • Per convalidare cliccare sul pulsante Ok :
  • Se si seleziona una linea il Sistema di assi prende il posizionamento dalla linea altrimenti il posizionamento è 0.0.0.
  • Se avete FreeCAD-Library Gui aperto , il file FCStd o Step selezionato viene importato e viene fatto un sistema strutturale.

Script

Macro_ArchAxisSystemRepartition.FCMacro

#!/usr/bin/env python
# -*- coding: utf-8 -*-

#***************************************************************************
#*                                                                         *
#*   Copyright (c) 2014 Jonathan Wiedemann <wood.galaxy@gmail.com          *
#*                                                                         *
#*   This program is free software; you can redistribute it and/or modify  *
#*   it under the terms of the GNU Lesser General Public License (LGPL)    *
#*   as published by the Free Software Foundation; either version 2 of     *
#*   the License, or (at your option) any later version.                   *
#*   for detail see the LICENCE text file.                                 *
#*                                                                         *
#*   This program is distributed in the hope that it will be useful,       *
#*   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
#*   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
#*   GNU Library General Public License for more details.                  *
#*                                                                         *
#*   You should have received a copy of the GNU Library General Public     *
#*   License along with this program; if not, write to the Free Software   *
#*   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  *
#*   USA                                                                   *
#*                                                                         *
#***************************************************************************

__title__="RepartitionSystemeAxesArch"
__author__ = "Jonathan Wiedemann"
__url__ = "http://www.freecad-france.com"

import FreeCAD, FreeCADGui, DraftGeomUtils, DraftVecUtils
import Arch
import Part
import math
from PySide import QtCore, QtGui

class _RepartitionTaskPanel:
	def __init__(self):
		self.title = QtGui.QLabel('Repartition')
		self.grid = QtGui.QGridLayout()
		self.grid.addWidget(self.title, 1, 0)

		self.longueurLabel = QtGui.QLabel('Longueur')

		self.dSBLongueur = QtGui.QDoubleSpinBox()
		self.dSBLongueur.setRange(0., 9999999.)
		self.sel = FreeCADGui.Selection.getSelection()
		if self.sel:
			self.longueur = self.sel[0].Shape.Length
			self.dSBLongueur.setValue(self.longueur)
		else:
			self.dSBLongueur.setValue(5000.)

		self.grid.addWidget(self.longueurLabel, 2, 0)
		self.grid.addWidget(self.dSBLongueur, 2, 1)

		self.ecartementLabel = QtGui.QLabel('Ecartement')
		self.ecartementDSB = QtGui.QDoubleSpinBox()
		self.ecartementDSB.setRange(0., 9999999.)
		self.ecartementDSB.setValue(500.)
		self.grid.addWidget(self.ecartementLabel, 3, 0)
		self.grid.addWidget(self.ecartementDSB, 3, 1)

		self.qteLabel = QtGui.QLabel('Quantite')
		self.qteSB = QtGui.QSpinBox()
		self.qteSB.setRange(0,99999)
		self.grid.addWidget(self.qteLabel, 4, 0)
		self.grid.addWidget(self.qteSB, 4, 1)

		self.infoText = QtGui.QLabel('Espace restant = ')
		self.grid.addWidget(self.infoText, 5, 0)
		self.combobox = QtGui.QComboBox()
		items = ["Debut","Fin","Divise"]
		self.combobox.addItems(items)
		self.combobox.setCurrentIndex(items.index("Fin"))
		self.grid.addWidget(self.combobox, 5, 1)

		self.debutLabel = QtGui.QLabel('Debut')
		self.grid.addWidget(self.debutLabel, 6, 0)

		self.debutRepartitionCB = QtGui.QCheckBox()
		self.debutRepartitionCB.setCheckState(QtCore.Qt.CheckState.Checked)
		self.grid.addWidget(self.debutRepartitionCB, 6, 1)

		self.decalageDebutLabel = QtGui.QLabel('Decalage')
		self.grid.addWidget(self.decalageDebutLabel, 7, 0)

		self.decalageDebutDSB = QtGui.QDoubleSpinBox()
		self.decalageDebutDSB.setRange(0., 9999999.)
		self.grid.addWidget(self.decalageDebutDSB, 7, 1)

		self.finLabel = QtGui.QLabel('Fin')
		self.grid.addWidget(self.finLabel, 8, 0)

		self.finRepartitionCB = QtGui.QCheckBox()
		self.finRepartitionCB.setCheckState(QtCore.Qt.CheckState.Checked)
		self.grid.addWidget(self.finRepartitionCB, 8, 1)

		self.decalageFinLabel = QtGui.QLabel('Decalage')
		self.grid.addWidget(self.decalageFinLabel, 9, 0)

		self.decalageFinDSB = QtGui.QDoubleSpinBox()
		self.decalageFinDSB.setRange(0., 9999999.)
		self.grid.addWidget(self.decalageFinDSB, 9, 1)

		groupBox = QtGui.QGroupBox()
		groupBox.setLayout(self.grid)
		self.form = groupBox

		QtCore.QObject.connect(self.dSBLongueur,QtCore.SIGNAL("valueChanged(double)"),self.changerLongueur)
		QtCore.QObject.connect(self.ecartementDSB,QtCore.SIGNAL("valueChanged(double)"),self.changerEcartement)
		QtCore.QObject.connect(self.qteSB,QtCore.SIGNAL("valueChanged(int)"),self.changerQte)
		QtCore.QObject.connect(self.combobox,QtCore.SIGNAL("currentIndexChanged(int)"),self.afficherResultats)
		self.changerLongueur()

	def recupererDonnees(self):
		self.sel = FreeCADGui.Selection.getSelection()
		if self.sel:
			self.longueur = self.sel[0].Shape.Length
		else:
			self.longueur = self.dSBLongueur.value()
		self.ecartementRegulier = self.ecartementDSB.value()
		self.qteEcartement = self.qteSB.value()

		self.objetDebut =  self.debutRepartitionCB.isChecked()
		self.decalageDebut = self.decalageDebutDSB.value()
		self.plEspaceRestant = self.combobox.currentIndex()
		self.objetFin = self.finRepartitionCB.isChecked()
		self.decalageFin = self.decalageFinDSB.value()

	def changerLongueur(self):
		self.recupererDonnees()
		self.qteEcartement = int(math.ceil(self.longueur/self.ecartementRegulier))
		self.afficherResultats()

	def changerEcartement(self):
		self.recupererDonnees()
		self.qteEcartement = int(math.ceil(self.longueur/self.ecartementRegulier))
		self.afficherResultats()

	def changerQte(self):
		self.recupererDonnees()
		self.ecartementRegulier = self.longueur/self.qteEcartement
		self.afficherResultats()

	def afficherResultats(self):
		self.dSBLongueur.blockSignals(True)
		self.dSBLongueur.setValue(self.longueur)
		self.dSBLongueur.blockSignals(False)

		self.ecartementDSB.blockSignals(True)
		self.ecartementDSB.setValue(self.ecartementRegulier)
		self.ecartementDSB.blockSignals(False)


		self.qteSB.blockSignals(True)
		self.qteSB.setValue(self.qteEcartement)
		self.qteSB.blockSignals(False)

		self.espaceRestant = self.longueur - (self.qteEcartement-1) * self.ecartementRegulier
		if round(self.espaceRestant,2) == round(self.ecartementRegulier,2):
			self.espaceRestant = 0.
		if self.combobox.currentIndex() == 2:
			self.infoText.setText( str('Espace restant = 2 x ') + str(round(self.espaceRestant/2,2)) + str(' mm') )
		else:
			self.infoText.setText( str('Espace restant = ') + str(round(self.espaceRestant,2)) + str(' mm') )

	def accept(self):
		self.recupererDonnees()
		distancesListe = []
		if self.objetDebut:
			distancesListe.append(self.decalageDebut)
		if self.plEspaceRestant == 0:
			distancesListe.append(self.espaceRestant)
		if self.plEspaceRestant == 1:
			distancesListe.append(self.ecartementRegulier-self.decalageDebut)
		if self.plEspaceRestant == 2:
			distancesListe.append(self.espaceRestant/2-self.decalageDebut)
		for i in range(self.qteEcartement-2):
			distancesListe.append(self.ecartementRegulier)
		if self.objetFin:
			if self.plEspaceRestant == 0:
				distancesListe.append(self.ecartementRegulier-self.decalageFin-self.decalageDebut)
			if self.plEspaceRestant == 1:
				distancesListe.append(self.espaceRestant-self.decalageFin)
			if self.plEspaceRestant == 2:
				distancesListe.append(self.ecartementRegulier)
				distancesListe.append((self.espaceRestant/2)-self.decalageFin)
		repartition = Arch.makeAxis(num=len(distancesListe), name="Repartition")
		repartition.Length = 1000.00
		repartition.Distances= distancesListe

		self.sel = FreeCADGui.Selection.getSelection()
		if self.sel:
			edges = DraftGeomUtils.sortEdges(self.sel[0].Shape.Wires[0].Edges)
			vec1 = edges[0].Vertexes[-1].Point.sub(edges[0].Vertexes[0].Point)
			point1 = edges[0].Vertexes[0].Point
			rot = math.degrees(DraftVecUtils.angle(vec1))*-1
			repartition.Placement = App.Placement(App.Vector(point1),App.Rotation(App.Vector(0.0,0.0,1.0),rot))
			FreeCAD.ActiveDocument.recompute()
		else:
			repartition.Placement = App.Placement(App.Vector(0.0,0.0,0.0),App.Rotation(App.Vector(0.0,0.0,1.0),0))

		m = FreeCADGui.getMainWindow()
		w = m.findChild(QtGui.QDockWidget,"PartsLibrary")
		if w.isVisible():
			if hasattr(w,'folder_view'):
				index = w.folder_view.selectedIndexes()[0]
				path = w.dirmodel.filePath(index)
				if path.lower().endswith(".stp") or path.lower().endswith(".step") or path.lower().endswith(".brep"):
					objetRepartit = Part.show(Part.read(path))
				else:
					objetRepartit = FreeCADGui.ActiveDocument.mergeProject(path)
				repartitionStructurel = Arch.makeStructuralSystem([FreeCAD.ActiveDocument.Objects[-1],],[repartition,], name="RepartitionStructurelle")
		return True

	def reject(self):
		return True

	def getStandardButtons(self):
		return int(QtGui.QDialogButtonBox.Ok|QtGui.QDialogButtonBox.Cancel)


panel=_RepartitionTaskPanel()
FreeCADGui.Control.showDialog(panel)

Link

Other languages: