Licence

From FreeCAD Documentation
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
This page is a translated version of the page Licence and the translation is 9% complete.
Outdated translations are marked like this.

Använda licenser

Här är de tre licenserna under vilka FreeCAD är publicerad:

FreeCAD uses two different licenses, one for the application itself, and one for the documentation:

GPL
För Python sripten för att bygga binärfilerna som uttalat i .py filerna i src/Tools
LGPL
För kärnbiblioteken som uttalat i .h och .cpp filerna i src/App src/Gui src/Base och de flesta modulerna i src/Mod och för de körbara som uttalat i .h och .cpp filerna i src/main
Open Publication Licence
För dokumentationen på http://free-cad.sourceforge.net/ om inget annat markerats av författaren

Creative Commons Attribution 3.0 License (CC-BY-3.0) For the documentation and the website.

Se FreeCAD's debian copyright file för mer detaljer om de licenser som används i FreeCAD

Licensernas inverkan

Below is a friendlier explanation of what the LGPL license means for you:

All users

Privata användare

Privata användare kan använda FreeCAD utan avgift och kan göra ungefär vad de vill med den....

Professional users

Professionella användare

Kan använda FreeCAD fritt, för alla sorters privata eller professionella arbeten. De kan anpassa applikationen som de önskar. De kan skriva öppen eller sluten källkodsextensioner till FreeCAD. De är alltid herrar över deras data, de är inte tvingade att uppdatera FreeCAD, ändra deras bruk av FreeCAD. Att använda FreeCAD binder dem inte till några kontrakt eller krav.

Open-source software developers

Öppen källkodsutvecklare

Kan använda FreeCAD som grundplattform för egna extensionsmoduler för speciella ändamål. De kan välja antingen GPL eller LGPL för att tillåta bruk av deras arbete i proprietär mjukvara, eller inte.

Closed-source software developers

Professionella utvecklare

Professionella utvecklare Kan använda FreeCAD som grundplattform för egna extensionsmoduler för speciella ändamål och är inte tvingade att göra sina moduler till öppen källkod. De kan använda alla moduler som använder LGPL. De är tillåtna att distribuera FreeCAD tillsammans med deras proprietära mjukvara. De kommer få support av författarna så länge som den inte är enkelriktad. Om du vill sälja din modul så behöver du en Coin3D licens, annars är du tvingad av detta bibliotek att göra den till öppen källkod.

1) You must clearly inform your users that your application is using FreeCAD and that FreeCAD is LGPL.

2) The LGPL license also stipulate your users must be able to swap your modified FreeCAD component with the original FreeCAD equivalent. That is would be done by dynamically linking to the FreeCAD components, so users are allowed to change it. However, this is often hard to achieve by today's requirements. At FreeCAD, we understand that the important point here is to not restrict the freedom given to FreeCAD users by the LGPL license. So an equivalent to dynamic linking is to offer the choice to your users, by making your users aware of the possibility to use FreeCAD for free. This can be done in a number of ways.

If any of the two conditions above are unacceptable to you or cannot be implemented, then you must make your FreeCAD component LGPL too and release the source code with all the modifications you made to it.

There is a special case called derivatives, which is when you publish basically a "rebranded" version of FreeCAD. Derivatives which are not open-source are prohibited by the LGPL license. The FreeCAD community is active and efficient in finding rebranded versions, reporting them to the platforms where they were found and exposing them until they are taken down.

Files

The models and other files produced with FreeCAD are not subject to any license stated above, nor bound to any kind of restriction or ownership. Your files are truly yours. You can set the owner of the file and specify your own license terms for the files you produce inside FreeCAD, via menu File → Project Information.

The FreeCAD logo is a trademark owned by the FPA (FreeCAD project association). This means the FPA is the sole body authorized to say who has the right to use the FreeCAD logo or not. The logo files, which are part of the FreeCAD source code or available elsewhere, for example on this wiki, are still all under the same licenses as the rest of FreeCAD (LGPL for the source code and Creative Commons for this wiki). You are still free to use the FreeCAD logo anywhere, on the same terms as the rest of FreeCAD, which means, basically, that you must use it to reference FreeCAD, and not use it, for example, for your own product, or any other way that is not referencing FreeCAD.

Statement of the main developer

Uttalande från underhållaren

Jag vet att diskussionen om "rätt" licens för öppen källkod tar upp en signifikant del av internetbandbredden, så här är skälen till varför, enligt min åsikt, FreeCAD ska ha denna.

Jag valde LGPL och GPL för projektet och jag vet för- och nackdelarna med LGPL och vill ge dig några skäl till det beslutet.

FreeCAD är en blandning av bibliotek och en applikation, så GPL skulle vara lite för starkt för det. Det skulle förhindra skapande av kommersiella moduler för FreeCAD därför att det skulle förhindra länkning med FreeCAD's basbibliotek. Du kanske frågar dig: varför kommersiella moduler överhuvudtaget? Därför är Linux ett bra exempel. Skulle Linux vara så framgångsrikt om GNU C Biblioteket skulle vara GPL och därför förhindra länkning mot icke-GPL applikationer? Och fastän jag älskar friheten i Linux, så vill jag också kunna använda den mycket bra NVIDIA 3D grafikdrivrutinen. Jag förstår och accepterar anledningen till att NVIDIA inte vill ge bort drivrutinskod. Vi jobbar alla för företag och behöver lön eller åtninstone mat. Så för mig är en samexistens av öppen källkod och sluten källkodsmjukvara inte något dåligt, när det följer reglerna i LGPL. Jag skulle vilja se någon som skriver en Catia import/export processor för FreeCAD och distribuerar den gratis eller för lite pengar. Jag tycker inte om att tvinga honom att ge bort mer än han vill. Det skulle inte vara bra varken för honom eller FreeCAD.

Detta beslut är ändå bara gjort för FreeCAD's kärnsystem. Var och en som skriver en applikationsmodul kan ta sina egna beslut.

Jürgen Riegel

—15 October 2006


Dialog creation/sv
Tracker/sv