Interface Customization: Difference between revisions

From FreeCAD Documentation
(Template {{Std Base}} to categorize the page)
No edit summary
Line 18: Line 18:
<!--T:5-->
<!--T:5-->
The '''Toolbars''' and '''Toolbox bars''' tabs let you modify existing toolbars, or create your own custom toolbars.
The '''Toolbars''' and '''Toolbox bars''' tabs let you modify existing toolbars, or create your own custom toolbars.

<!--T:7-->
Under the tab '''Worksbenches''' ('''Workbenches''') the workbenches existing in FreeCAD are listed, on the left the currently passive, on the right the currently active workspaces. The status can be changed with the horizontal arrows.

[[Image:UserdefSymbLeisten.jpg]]]

Under the tab '''Toolbars''' ('''Toolbars''') on the left are the same command categories as under the map '''Commands'''. After clicking on a category the corresponding commands appear, which can be copied to the right side. Before you do this, select an active workspace to which you want to add an individual toolbar. First select a name for this toolbar with '''New''' ('''New...''') before copying commands over to it. When this workspace is called later, this bar must be activated: '''View -> Toolbars'''.

Remark: If "Global" (instead of a workspace) is selected on the right, the added toolbar can be activated in each workspace.





<!--T:6-->
<!--T:6-->

Revision as of 21:51, 22 November 2019

Import Export Preference
Property editor

Since FreeCAD interface is based on the modern Qt toolkit, it has a state-of-the-art organization. Widgets, menus, toolbars and other tools can be modified, moved, shared between workbenches, keyboard shortcuts can be set, modified, and macros can be recorded and played. The customization window is accessed from the Tools → Customize menu:

Customization tabs

The Commands tab lets you browse all available FreeCAD commands, organized by their category.

In Keyboard, you can see the keyboard shortcuts associated with every FreeCAD command, and if you want, modify or assign new shortcut to any command. This is where to come if you use a particular workbench often, and would like to speed up its use by using the keyboard.

The Toolbars and Toolbox bars tabs let you modify existing toolbars, or create your own custom toolbars.

Under the tab Worksbenches (Workbenches) the workbenches existing in FreeCAD are listed, on the left the currently passive, on the right the currently active workspaces. The status can be changed with the horizontal arrows.

File:UserdefSymbLeisten.jpg]

Under the tab Toolbars (Toolbars) on the left are the same command categories as under the map Commands. After clicking on a category the corresponding commands appear, which can be copied to the right side. Before you do this, select an active workspace to which you want to add an individual toolbar. First select a name for this toolbar with New (New...) before copying commands over to it. When this workspace is called later, this bar must be activated: View -> Toolbars.

Remark: If "Global" (instead of a workspace) is selected on the right, the added toolbar can be activated in each workspace.



The Macros tab lets you manage your saved Macros.

Create your Toolbars for your macro Customize Toolbars

Since FreeCAD 0.16 a new tool is available that lets you manage your workbenches.

Example

For an example workflow lets suppose we want to have the "Measure Linear" tool also show up in a custom toolbar in the Draft Workbench.

  • in FreeCAD choose Tools → Customize from the top menu
  • select the "Toolbars" tab
  • on the left side choose "Part" in the pull down menu
  • on the left side in the lower window scroll down to the "Measure Linear" entry and select it
  • on the right side choose "Draft" in the pull down menu
  • click on New... to create a new toolbar and choose a name for it
  • now select your destination toolbar in the right lower window (only needed if you have more than one toolbar)
  • by clicking on the blue "Arrow right" (top icon in the middle row) you will add your selected entry to the selected toolbar

Remarks

When selecting "Global" in the pull down menu on the right side you will create a toolbar which will be visible in all workbenches.

For adding an installed macro to a toolbar you must

  • select "Macros" in the pull down menu on the left side
  • have assigned menu text, icon (Pixmap) and so on using the Tools → Customize → Macros menu
Import Export Preference
Property editor

Template:Interface