Windows'ta kurulum

From FreeCAD Documentation
Revision as of 23:15, 22 December 2018 by Skywalker21 (talk | contribs) (Created page with "*DefaultFeature - yazılımı uygun bir şekilde yükle, bunun yanında çekirdek kütüphanelerini de * Documentation - belgeleri yükleyin *Source code -...")

FreeCAD'i Windows'a kurmanın en kolay yolu aşağıdaki kurulum dosyalarından, işletim sisteminize uygun olanı indirmektir.

Template:DownloadWindowsStable

.Msi (Microsoft Installer) dosyasını indirdikten sonra, kurulum işlemini başlatmak için üzerine çift tıklayın.

Aşağıda kurulum hakkında daha fazla bilgi bulunmaktadır. Size zor gibi görünüyorsa, endişelenmeyin! Çoğu Windows kullanıcısı, FreeCAD'i kurmak ve çalışmaya başlamak için .msi'den daha fazlasına ihtiyaç duymaz !


Basit Microsoft Yükleyici Kurulumu

FreeCAD'i Windows'a kurmanın en kolay yolu yukarıda indirebileceğiniz kurulum dosyasıdır. Bu sayfada, daha fazla kurulum seçeneği için Microsoft Installer'ın kullanımı ve özellikleri açıklanmaktadır .

64 bit veya kararsız bir geliştirme sürümü indirmek istiyorsanız, İndirme sayfasına bakın.


Komut Satırı Kurulumu

msiexec.exe komut satırı yardımcı programı ile birlikte ek özellikler, etkileşimsiz kurulum ve Yönetici yüklemesi gibi özellikler bulunur.

Etkileşimsiz Kurulum

Komut satırı ile

 msiexec /i FreeCAD<version>.msi

Kurulum programlı olarak başlatılabilir. Bu komut satırının sonunda ek parametreler geçilebilir.

msiexec /i FreeCAD-2.5.msi TARGETDIR=r:\FreeCAD25

Sınırlı kullanıcı arayüzü

Yükleyicinin görüntülediği kullanıcı ara birimi miktarı, özellikle /q seçenekleriyle kontrol edilebilir:

  • /qn - Arayüz yok
  • /qb - Temel arayüz - sadece küçük bir ilerleme iletişim kutusu
  • /qb! - /qb gibi, ancak İptal düğmesini gizle
  • /qr - Azaltılmış arayüz - kullanıcı etkileşimi gerektirmeyen tüm iletişim
       kutularını görüntüler (tüm mod iletişim kutularını atla)
  • /qn+ -/qn gibi, ancak sonunda "Tamamlandı" iletişim kutusunu görüntüle
  • /qb+ -/qb gibi, ancak sonunda "Tamamlandı" iletişim kutusunu görüntüle

Hedef dizin

TARGETDIR özelliği, FreeCAD kurulumunun kök dizinini belirler. Örneğin, farklı bir yükleme sürücüsü ile belirtilebilir.

TARGETDIR=R:\FreeCAD25

Varsayılan TARGETDIR [WindowsVolume \ Programm Files \] FreeCAD <sürümdür.

Tüm Kullanıcılar için Kurulum

Eklenen

ALLUSERS=1

Tüm kullanıcılar için yüklemeye neden olur. Varsayılan olarak, etkileşimsiz yükleme paketi yalnızca geçerli kullanıcı için yükler ve etkileşimli yükleme, kullanıcı yetkili ise "tüm kullanıcılar" için varsayılan olan bir iletişim kutusu sunar.

Özellik Seçimi

Bazı özellikler, özelliklerin kurulmasına, yeniden kurulmasına veya kaldırılmasına olanak sağlar. FreeCAD yükleyici için bir dizi özellik;

  • DefaultFeature - yazılımı uygun bir şekilde yükle, bunun yanında çekirdek
                 kütüphanelerini de
  • Documentation - belgeleri yükleyin
  • Source code - kaynakları kurun
  • ... Yapılacaklar

In addition, ALL specifies all features. All features depend on DefaultFeature, so installing any feature automatically installs the default feature as well. The following properties control features to be installed or removed

  • ADDLOCAL - list of feature to be installed on the local machine
  • REMOVE - list of features to be removed
  • ADDDEFAULT - list of features added in their default configuration (which is local for all FreeCAD features)
  • REINSTALL - list of features to be reinstalled/repaired
  • ADVERTISE - list of feature for which to perform an advertise installation

There are a few additional properties available; see the MSDN documentation for details.

With these options, adding

ADDLOCAL=Extensions

installs the interpreter itself and registers the extensions, but does not install anything else.

Uninstallation

With

msiexec /x FreeCAD<version>.msi

FreeCAD can be uninstalled. It is not necessary to have the MSI file available for uninstallation; alternatively, the package or product code can also be specified. You can find the product code by looking at the properties of the Uninstall shortcut that FreeCAD installs in the start menu.

Administrative installation

With

msiexec /a FreeCAD<version>.msi

an "administrative" (network) installation can be initiated. The files get unpacked into the target directory (which should be a network directory), but no other modification is made to the local system. In addition, another (smaller) msi file is generated in the target directory, which clients can then use to perform a local installation (future versions may also offer to keep some features on the network drive altogether).

Currently, there is no user interface for administrative installations, so the target directory must be passed on the command line.

There is no specific uninstall procedure for an administrative install - just delete the target directory if no client uses it anymore.

With

msiexec /jm FreeCAD<version>.msi

it would be possible, in principle, to "advertise" FreeCAD to a machine (with /ju to a user). This would cause the icons to appear in the start menu, and the extensions to become registered, without the software actually being installed. The first usage of a feature would cause that feature to be installed.

The FreeCAD installer currently supports just advertisement of start menu entries, but no advertisement of shortcuts.

Automatic Installation on a Group of Machines

With Windows Group Policy, it is possible to automatically install FreeCAD an a group of machines. To do so, perform the following steps:

  1. Log on to the domain controller
  2. Copy the MSI file into a folder that is shared with access granted to all target machines.
  3. Open the MMC snapin "Active Directory users and computers"
  4. Navigate to the group of computers that need FreeCAD
  5. Open Properties
  6. Open Group Policies
  7. Add a new policy, and edit it
  8. In Computer Configuration/Software Installation, choose New/Package
  9. Select the MSI file through the network path
  10. Optionally, select that you want the FreeCAD to be deinstalled if the computer leaves the scope of the policy.

Group policy propagation typically takes some time - to reliably deploy the package, all machines should be rebooted.

Installation on Linux using Crossover Office

You can install the windows version of FreeCAD on a Linux system using CXOffice 5.0.1. Run msiexec from the CXOffice command line, assuming that the install package is placed in the "software" directory which is mapped to the drive letter "Y:":

msiexec /i Y:\\software\\FreeCAD<version>.msi

FreeCAD is running, but it has been reported that the OpenGL display does not work, like with other programs running under Wine i.e. Google SketchUp.