Установка в Windows

From FreeCAD Documentation
Revision as of 11:39, 1 December 2018 by Asv (talk | contribs) (Created page with "==== Выбор особенностей ==== Некоторые из свойств позволяют выбрать особенности при установке, пер...")

Наиболее лёгкий способ установить FreeCAD под Windows - это загрузить программу установки по ссылке ниже.

Template:DownloadWindowsStable

После загрузки файла .msi (Microsoft Installer), просто дважды щёлкните по нему мышкой для начала установки.

Далее приведена информация о технических опциях. Если она выглядит обескураживающей, не волнуйтесь! Большинству пользователей Windows не потребуется ничего кроме файла .msi чтобы установить FreeCAD и начать с ним работу!


Простая установка c Microsoft Installer

Простейший способ установить FreeCAD на Windows - с помощью расположенного выше установщика. Эта страница описывает использование и возможности Windows Installer для дополнительных опций установки.

Если вы хотите загрузить 64-битную или нестабильную разрабатываемую версию, см. страницу Загрузки.


Установка из командной строки

В утилите командной строки msiexec.exe доступны дополнительные особенности, такие как не интерактивная установка и административная установка.

Не интерактивная установка

Из командной строки

 msiexec /i FreeCAD<version>.msi

установка может быть начата программно. Дополнительные параметры могут быть переданы в конце командной строки, например

msiexec /i FreeCAD-2.5.msi TARGETDIR=r:\FreeCAD25

Ограниченный интерфейс пользователя

Интерфейс пользователя отображаемый установщиком может управляться опцией /q, а именно:

  • /qn - без интерфейса
  • /qb - основной интерфейс - только маленький диалог прогресса
  • /qb! - как /qb, но скрыть кнопку Отмена
  • /qr - уменьшенный интерфейс - отображать все диалоги, которые не требуют взаимодействия с пользователем (пропустить все модальные диалоги)
  • /qn+ - как /qn, но отобразить диалог "Завершено" по окончании
  • /qb+ - как /qb, но отобразить диалог "Завершено" по окончании

Целевая папка

Свойство TARGETDIR определяет корневую папку для установки FreeCAD. Например, для установки на отдельный диск, может быть указано

TARGETDIR=R:\FreeCAD25

По умолчанию TARGETDIR имеет значение [WindowsVolume\Programm Files\]FreeCAD<version>.

Установка для всех пользователей

Добавление

ALLUSERS=1

приводит к установке для всех пользователей. По умолчанию, не интерактивная установка устанавливает пакет только для текущего пользователя, а интерактивная установка предлагает диалог со значением по умолчанию "для всех пользователей", если пользователь имеет достаточно привилегий.

Выбор особенностей

Некоторые из свойств позволяют выбрать особенности при установке, переустановке или удалении. Перечень особенностей для установки FreeCAD

  • DefaultFeature - install the software proper, plus the core libraries
  • Documentation - install documentation
  • Source code - install the sources
  • ... ToDo

In addition, ALL specifies all features. All features depend on DefaultFeature, so installing any feature automatically installs the default feature as well. The following properties control features to be installed or removed

  • ADDLOCAL - list of feature to be installed on the local machine
  • REMOVE - list of features to be removed
  • ADDDEFAULT - list of features added in their default configuration (which is local for all FreeCAD features)
  • REINSTALL - list of features to be reinstalled/repaired
  • ADVERTISE - list of feature for which to perform an advertise installation

There are a few additional properties available; see the MSDN documentation for details.

With these options, adding

ADDLOCAL=Extensions

installs the interpreter itself and registers the extensions, but does not install anything else.

Uninstallation

With

msiexec /x FreeCAD<version>.msi

FreeCAD can be uninstalled. It is not necessary to have the MSI file available for uninstallation; alternatively, the package or product code can also be specified. You can find the product code by looking at the properties of the Uninstall shortcut that FreeCAD installs in the start menu.

Administrative installation

With

msiexec /a FreeCAD<version>.msi

an "administrative" (network) installation can be initiated. The files get unpacked into the target directory (which should be a network directory), but no other modification is made to the local system. In addition, another (smaller) msi file is generated in the target directory, which clients can then use to perform a local installation (future versions may also offer to keep some features on the network drive altogether).

Currently, there is no user interface for administrative installations, so the target directory must be passed on the command line.

There is no specific uninstall procedure for an administrative install - just delete the target directory if no client uses it anymore.

With

msiexec /jm FreeCAD<version>.msi

it would be possible, in principle, to "advertise" FreeCAD to a machine (with /ju to a user). This would cause the icons to appear in the start menu, and the extensions to become registered, without the software actually being installed. The first usage of a feature would cause that feature to be installed.

The FreeCAD installer currently supports just advertisement of start menu entries, but no advertisement of shortcuts.

Automatic Installation on a Group of Machines

With Windows Group Policy, it is possible to automatically install FreeCAD an a group of machines. To do so, perform the following steps:

  1. Log on to the domain controller
  2. Copy the MSI file into a folder that is shared with access granted to all target machines.
  3. Open the MMC snapin "Active Directory users and computers"
  4. Navigate to the group of computers that need FreeCAD
  5. Open Properties
  6. Open Group Policies
  7. Add a new policy, and edit it
  8. In Computer Configuration/Software Installation, choose New/Package
  9. Select the MSI file through the network path
  10. Optionally, select that you want the FreeCAD to be deinstalled if the computer leaves the scope of the policy.

Group policy propagation typically takes some time - to reliably deploy the package, all machines should be rebooted.

Установка в Linux с использованием Crossover Office

You can install the windows version of FreeCAD on a Linux system using CXOffice 5.0.1. Run msiexec from the CXOffice command line, assuming that the install package is placed in the "software" directory which is mapped to the drive letter "Y:":

msiexec /i Y:\\software\\FreeCAD<version>.msi

FreeCAD is running, but it has been reported that the OpenGL display does not work, like with other programs running under Wine i.e. Google SketchUp.

Feature list/ru
Install on Unix/ru