Instalar em Windows

From FreeCAD Documentation
Revision as of 20:05, 11 December 2013 by Renatorivo (talk | contribs) (Created page with "==== Seleção de Funcionalidades ==== Há um número de propriedades que permitem a seleção das funcionalidades a serem instaladas, reinstaladas, ou removidas. O conjunto d...")

The easiest way to install FreeCAD on Windows is to download the installer below.

Template:DownloadWindowsStable


NOTA: os processos descritos aqui não foram testados pelo tradutor na versão portuguesa do Windows, como tal os momes das opções indicados aqui podem não corresponder aos vistos no ecran...

A maneira mais fácil de instalar o FreeCAD no Windows é correndo o programa de instalação seguinte:

Template:DownloadWindowsStable

Depois de fazer o download do ficheiro .msi (instalador da Microsoft), faça duplo-clique nele para iniciar o processo de instalação.

Em baixo encontra mais informação sobre opções técnicas. Se lhe parece complicado, não se preocupe, para a maioria dos utilizadores de Windows basta o ficheiro de instalação .msi e a secção Get started.


Instalação simples

A maneira mais fácil de instalar o FreeCAD no Windows é usando o instalador acima. Esta página descreve as funcionalidades do Instalador Windows para mais opções de instalação.

Se quiser fazer o download da versão 64 bits ou a versão de desenvolvimento instável, veja a página dos Downloads.


Instalação a partir da linha de comandos

Com a ferramenta da linha de comandos msiexec.exe há mais funcionalidades disponíveis, como instalção não-interativa e instalação administrativa.

Instalação Não-Interativa

Com o comando

 msiexec /i FreeCAD<version>.msi

a instalação pode ser iniciada programáticamente. Podem ser passados parâmetros adicionais ao comando, como

 msiexec /i FreeCAD-2.5.msi TARGETDIR=r:\FreeCAD25

Interfaces limitados

A quantidade de diálogos que o instalador mostra pode ser controlado com opções /q, em particular:

  • /qn - Sem interface
  • /qb - Interface básico - mostra apenas um diálogo indicando o progresso
  • /qb! - Como /qb, mas esconde o botão Cancel
  • /qr - Interface reduzido - mostra todos os diálogos que não requerem interação com o utilizador
  • /qn+ - Como /qn, mas mostra o diálogo "Completed" no fim
  • /qb+ - Como /qn, mas mostra o diálogo "Completed" no fim

Pasta de destino

A propriedade TARGETDIR determina a pasta raiz da instalação FreeCAD. Por exemplo, pode ser especificado um disco de instalação diferente com

TARGETDIR=R:\FreeCAD25

O TARGETDIR por defeito é [WindowsVolume\Programm Files\]FreeCAD<version>.

Instalação para Todos os Utilizadores

Adiconando

 ALLUSERS=1

leva à instalação para todos os utilizadores. Por defeito, a instalação não interativa instala o programa para o utilizador atual, e a instalação interativa oferece um diálogo que seleciona "todos os utilizadores" por defeito, se o utilizador atual tiver privilégios suficientes.

Seleção de Funcionalidades

Há um número de propriedades que permitem a seleção das funcionalidades a serem instaladas, reinstaladas, ou removidas. O conjunto de funcionalidades do instalador do FreeCAD é

  • DefaultFeature - install the software proper, plus the core libraries
  • Documentation - install documentation
  • Source code - install the sources
  • ... ToDo

In addition, ALL specifies all features. All features depend on DefaultFeature, so installing any feature automatically installs the default feature as well. The following properties control features to be installed or removed

  • ADDLOCAL - list of feature to be installed on the local machine
  • REMOVE - list of features to be removed
  • ADDDEFAULT - list of features added in their default configuration (which is local for all FreeCAD features)
  • REINSTALL - list of features to be reinstalled/repaired
  • ADVERTISE - list of feature for which to perform an advertise installation

There are a few additional properties available; see the MSDN documentation for details.

With these options, adding

 ADDLOCAL=Extensions

installs the interpreter itself and registers the extensions, but does not install anything else.

Uninstallation

With

 msiexec /x FreeCAD<version>.msi

FreeCAD can be uninstalled. It is not necessary to have the MSI file available for uninstallation; alternatively, the package or product code can also be specified. You can find the product code by looking at the properties of the Uninstall shortcut that FreeCAD installs in the start menu.

Administrative installation

With

 msiexec /a FreeCAD<version>.msi

an "administrative" (network) installation can be initiated. The files get unpacked into the target directory (which should be a network directory), but no other modification is made to the local system. In addition, another (smaller) msi file is generated in the target directory, which clients can then use to perform a local installation (future versions may also offer to keep some features on the network drive altogether).

Currently, there is no user interface for administrative installations, so the target directory must be passed on the command line.

There is no specific uninstall procedure for an administrative install - just delete the target directory if no client uses it anymore.

With

 msiexec /jm FreeCAD<version>.msi

it would be possible, in principle, to "advertise" FreeCAD to a machine (with /ju to a user). This would cause the icons to appear in the start menu, and the extensions to become registered, without the software actually being installed. The first usage of a feature would cause that feature to be installed.

The FreeCAD installer currently supports just advertisement of start menu entries, but no advertisement of shortcuts.

Automatic Installation on a Group of Machines

With Windows Group Policy, it is possible to automatically install FreeCAD an a group of machines. To do so, perform the following steps:

  1. Log on to the domain controller
  2. Copy the MSI file into a folder that is shared with access granted to all target machines.
  3. Open the MMC snapin "Active Directory users and computers"
  4. Navigate to the group of computers that need FreeCAD
  5. Open Properties
  6. Open Group Policies
  7. Add a new policy, and edit it
  8. In Computer Configuration/Software Installation, choose New/Package
  9. Select the MSI file through the network path
  10. Optionally, select that you want the FreeCAD to be deinstalled if the computer leaves the scope of the policy.

Group policy propagation typically takes some time - to reliably deploy the package, all machines should be rebooted.

Installation on Linux using Crossover Office

You can install the windows version of FreeCAD on a Linux system using CXOffice 5.0.1. Run msiexec from the CXOffice command line, assuming that the install package is placed in the "software" directory which is mapped to the drive letter "Y:":

msiexec /i Y:\\software\\FreeCAD<version>.msi

FreeCAD is running, but it has been reported that the OpenGL display does not work, like with other programs running under Wine i.e. Google SketchUp.

Feature list
Install on Unix