Image Workbench/sv: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
(6 intermediate revisions by the same user not shown)
Line 1: Line 1:
<languages/>
The image module manages different types of [http://en.wikipedia.org/wiki/Raster_graphics bitmap images], and lets you open them in FreeCAD. <br />
{{docnav|[[FEM Workbench|FEM Workbench]]|[[Inspection Workbench|Inspection Workbench]]|IconL=Workbench_FEM.svg|IconR=InspectionWorkbench.svg}}
<br />
Currently, the modules lets you open .bmp, .jpg, .png and .xpm file formats in a separate viewer window.


[[Image:Workbench_Image.svg|64px]]
The image workbenches also allows you to import an image on a plane in the 3D-space of FreeCAD. This function is available via the second button of the image workbench. [[File:Image-import.svg|32px]].
<br />
The imported image can be attached like a sketch to one of the main three planes (XY/XZ/YZ) with positive or negativ offset.
<br />
This function is only available if you have opened a FreeCAD document.


== Introduction ==
The image can be moved in 3D-space by editing the placement in the [[Property editor|Property editor]].
<br />
The major use is tracing over the image, in order to generate a new part at using the image as template.


<div class="mw-translate-fuzzy">
The image is imported with 1 pixel = 1mm.
Bildmodulen hanterar olika typer av [http://sv.wikipedia.org/wiki/Rastergrafik bitmapp bilder], och låter dig öppna dem i FreeCAD. För närvarande, så kan modulen öppna .bmp, .jpg, .png och .xpm filformat i ett separat visningsfönster. Det finns också ett verktyg som tillåter dig att fånga bilder från en webcam.
Therefore it is recommended to have the imported image in a reasonable resolution.
</div>
The image can be scaled by editing the "XSize" and "YSize" values in the [[Property editor|Property editor]].
The image can be also moved by editing the X/Y/Z-values in the Placement-Tab.
The image can also be rotated around any axis by using the placement-dialogue.


Currently, the module supports opening BMP, JPG, PNG, and XPM file formats.
'''Tip:'''<br />
Tracing with sketcher elements over an image works best if the image has a small (negative) offset to the sketch plane.
<br />
You can set an offset of -0,1 mm at import or later by editing the placement of the image.


== Tools ==
{{docnav|Raytracing Module|Draft Module}}

* [[Image:Image-import.svg|32px]] [[Image_Open|Open]]: open an image on a new viewport.
* [[Image:Image-import-to-plane.svg|32px]] [[Image_CreateImagePlane|Import to plane]]: import an image to a plane in the 3D view.
* [[Image:Image-scale.svg|32px]] [[Image_Scaling|Scaling]]: scale an image imported to a plane.

== Features ==

* Like a [[Sketcher Workbench|Sketch]], an imported image can be attached to one of the main planes XY, XZ, or YZ, and given a positive or negative offset.
* The image is imported with relation of 1 pixel to 1 millimeter.
* The recommendation is to have the imported image at a reasonable resolution.

== Workflow ==
A major use of this workbench is tracing over the image, with the [[Draft Workbench|Draft]] or [[Sketcher Workbench|Sketcher]] tools, in order to generate a solid body based on the contours of the image.

Tracing over an image works best if the image has a small negative offset, for example, -0.1 mm, from the working plane. This means that the image will be slightly behind the plane where you draw your 2D geometry, so you won't draw on the image itself.

The offset of the image can be set during import, or changed later through its properties.

<div class="mw-translate-fuzzy">
{{docnav/sv|Draft Module/sv|Macros/sv}}
</div>

{{Image Tools navi}}

{{Userdocnavi}}

[[Category:Workbenches]]


[[Category:User Documentation/sv]]


{{clear}}
{{clear}}
<languages/>

Revision as of 11:29, 1 April 2019

Introduction

Bildmodulen hanterar olika typer av bitmapp bilder, och låter dig öppna dem i FreeCAD. För närvarande, så kan modulen öppna .bmp, .jpg, .png och .xpm filformat i ett separat visningsfönster. Det finns också ett verktyg som tillåter dig att fånga bilder från en webcam.

Currently, the module supports opening BMP, JPG, PNG, and XPM file formats.

Tools

  • Open: open an image on a new viewport.
  • Import to plane: import an image to a plane in the 3D view.
  • Scaling: scale an image imported to a plane.

Features

  • Like a Sketch, an imported image can be attached to one of the main planes XY, XZ, or YZ, and given a positive or negative offset.
  • The image is imported with relation of 1 pixel to 1 millimeter.
  • The recommendation is to have the imported image at a reasonable resolution.

Workflow

A major use of this workbench is tracing over the image, with the Draft or Sketcher tools, in order to generate a solid body based on the contours of the image.

Tracing over an image works best if the image has a small negative offset, for example, -0.1 mm, from the working plane. This means that the image will be slightly behind the plane where you draw your 2D geometry, so you won't draw on the image itself.

The offset of the image can be set during import, or changed later through its properties.

Draft Module/sv
Macros/sv