Image Workbench/ro: Difference between revisions

From FreeCAD Documentation
No edit summary
(Created page with "== Funcționalități ==")
Line 4: Line 4:
Currently, the module lets you open .bmp, .jpg, .png and .xpm file formats in a separate viewer window.
Currently, the module lets you open .bmp, .jpg, .png and .xpm file formats in a separate viewer window.


== Features ==
== Funcționalități ==


* The image workbench also allows you to import an image on a plane in the 3D-space of FreeCAD with [[Image_Import|Image Import]], the second button of the image workbench.
* The image workbench also allows you to import an image on a plane in the 3D-space of FreeCAD with [[Image_Import|Image Import]], the second button of the image workbench.

Revision as of 19:17, 9 October 2018

Atelierul Imagine gestionează diferite tipuri de imagini bitmap [1] și vă permite să le deschideți în FreeCAD.

Currently, the module lets you open .bmp, .jpg, .png and .xpm file formats in a separate viewer window.

Funcționalități

  • The image workbench also allows you to import an image on a plane in the 3D-space of FreeCAD with Image Import, the second button of the image workbench.
  • The imported image can be attached like a sketch to one of the main three planes (XY/XZ/YZ) with positive or negative offset.
  • This function is only available if you have opened a FreeCAD document.
  • The image can be moved in 3D-space by editing the placement in the Property editor.
  • The major use is tracing over the image, in order to generate a new part while using the image as a template.
  • The image is imported with 1 pixel = 1mm.
 * The recommendation is to have the imported image at a reasonable resolution.
  • The image can be scaled by editing the "XSize" and "YSize" values in the Property editor.
  • The image can be moved by editing the X/Y/Z-values in the Property editor.
  • The image can be rotated around any axis by using the Property editor.

Tip:
Urmărirea cu elemente de schiță peste o imagine funcționează cel mai bine dacă imaginea are o mică (negativă) decalare față de planul de schiță.
Puteți seta o decalare de -0,1 mm la import sau mai târziu, prin editarea destinației de plasare a imaginii.

Instrumente

Image Import

Raytracing Module/ro
Draft Module/ro