Difference between revisions of "Image Module/pl"

From FreeCAD Documentation
Jump to: navigation, search
(9 intermediate revisions by 2 users not shown)
Line 1: Line 1:
Moduł obrazu obsługuje różne rodzaje [http://pl.wikipedia.org/wiki/Grafika_rastrowa bitmap] i pozwala otwierać je we FreeCADzie. Aktualnie moduł pozwala na otwieranie formatów plików .bmp, .jpg, .png i .xpm w oddzielnym oknie przeglądarki. Obecne jest także narzędzie pozwalające na przechwytywanie obrazu z kamerki internetowej.
+
<languages/>
 +
{{docnav|[[FEM Workbench|FEM Workbench]]|[[Inspection Workbench|Inspection Workbench]]|IconL=Workbench_FEM.svg|IconR=InspectionWorkbench.svg}}
 +
 
 +
[[Image:Workbench_Image.svg|64px]]
 +
 
 +
== Introduction ==
 +
 
 +
{{TOCright}}
 +
Środowisko pracy [[Image]] zarządza różnymi typami plików graficznych [[bitmap]] i umożliwia ich otwarcie w programie FreeCAD.
 +
 
 +
Currently, the module supports opening BMP, JPG, PNG, and XPM file formats.
 +
 
 +
== Tools ==
 +
 
 +
* [[Image:Image-import.svg|32px]] [[Image_Open|Open]]: open an image on a new viewport.
 +
* [[Image:Image-import-to-plane.svg|32px]] [[Image_CreateImagePlane|Import to plane]]: import an image to a plane in the 3D view.
 +
* [[Image:Image-scale.svg|32px]] [[Image_Scaling|Scaling]]: scale an image imported to a plane.
 +
 
 +
== Features ==
 +
 
 +
* Like a [[Sketcher Workbench|Sketch]], an imported image can be attached to one of the main planes XY, XZ, or YZ, and given a positive or negative offset.
 +
* The image is imported with relation of 1 pixel to 1 millimeter.
 +
* The recommendation is to have the imported image at a reasonable resolution.
 +
 
 +
== Workflow ==
 +
A major use of this workbench is tracing over the image, with the [[Draft Workbench|Draft]] or [[Sketcher Workbench|Sketcher]] tools, in order to generate a solid body based on the contours of the image.
  
The image workbenches also allow to import an image on a plane in the 3D-space of FreeCAD. This function is available via the second button of the image workbench. [[File:Image-import.svg|32px]].
+
Tracing over an image works best if the image has a small negative offset, for example, -0.1 mm, from the working plane. This means that the image will be slightly behind the plane where you draw your 2D geometry, so you won't draw on the image itself.
<br />
 
This function is only available if you have opened a FreeCAD document.
 
  
The image can be moved in 3D-space by editing the placement in the [[Property editor|Property editor]]. The major use is tracing over the image, in order to generate a new part at using the image as template.
+
The offset of the image can be set during import, or changed later through its properties.
  
The image can be scaled by editing the "XSize" and "YSize" values in the [[Property editor|Property editor]].
+
{{docnav/pl
 +
|[[FEM Workbench|FEM Workbench]]
 +
|[[Inspection Workbench|Inspection Workbench]]
 +
|IconL=Workbench_FEM.svg
 +
|IconR=InspectionWorkbench.svg}}
  
'''Tip:'''<br />
+
{{Image Tools navi}}
Tracing with sketcher elements over an image works best if the image has a small (negative) offset to the sketch plane.<br />
 
You can set an offset of -0,1 at import or later by editing the placement of the image.
 
  
{{docnav|Raytracing Module|Draft Module}}
+
{{Userdocnavi}}
 +
 
 +
[[Category:Workbenches]]
  
[[Category:User Documentation/pl]]
 
  
 
{{clear}}
 
{{clear}}
<languages/>
 

Revision as of 18:32, 18 November 2019

Other languages:
čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎hrvatski • ‎Bahasa Indonesia • ‎italiano • ‎日本語 • ‎polski • ‎português • ‎português do Brasil • ‎română • ‎русский • ‎svenska • ‎Türkçe • ‎українська • ‎中文 • ‎中文(中国大陆)‎ • ‎中文(台灣)‎

Workbench Image.svg

Introduction

Środowisko pracy Image zarządza różnymi typami plików graficznych bitmap i umożliwia ich otwarcie w programie FreeCAD.

Currently, the module supports opening BMP, JPG, PNG, and XPM file formats.

Tools

  • Image-import.svg Open: open an image on a new viewport.
  • Image-import-to-plane.svg Import to plane: import an image to a plane in the 3D view.
  • Image-scale.svg Scaling: scale an image imported to a plane.

Features

  • Like a Sketch, an imported image can be attached to one of the main planes XY, XZ, or YZ, and given a positive or negative offset.
  • The image is imported with relation of 1 pixel to 1 millimeter.
  • The recommendation is to have the imported image at a reasonable resolution.

Workflow

A major use of this workbench is tracing over the image, with the Draft or Sketcher tools, in order to generate a solid body based on the contours of the image.

Tracing over an image works best if the image has a small negative offset, for example, -0.1 mm, from the working plane. This means that the image will be slightly behind the plane where you draw your 2D geometry, so you won't draw on the image itself.

The offset of the image can be set during import, or changed later through its properties.