Difference between revisions of "Image Module/pl"

From FreeCAD Documentation
Jump to: navigation, search
(Updating to match new version of source page)
Line 6: Line 6:
 
== Introduction ==
 
== Introduction ==
  
<div class="mw-translate-fuzzy">
+
{{TOCright}}
Moduł obrazu obsługuje różne rodzaje [http://pl.wikipedia.org/wiki/Grafika_rastrowa bitmap] i pozwala otwierać je we FreeCADzie. Aktualnie moduł pozwala na otwieranie formatów plików .bmp, .jpg, .png i .xpm w oddzielnym oknie przeglądarki. Obecne jest także narzędzie pozwalające na przechwytywanie obrazu z kamerki internetowej.
+
Środowisko pracy [[Image]] zarządza różnymi typami plików graficznych [[bitmap]] i umożliwia ich otwarcie w programie FreeCAD.
</div>
 
  
 
Currently, the module supports opening BMP, JPG, PNG, and XPM file formats.
 
Currently, the module supports opening BMP, JPG, PNG, and XPM file formats.

Revision as of 18:31, 18 November 2019

Other languages:
čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎hrvatski • ‎Bahasa Indonesia • ‎italiano • ‎日本語 • ‎polski • ‎português • ‎português do Brasil • ‎română • ‎русский • ‎svenska • ‎Türkçe • ‎українська • ‎中文 • ‎中文(中国大陆)‎ • ‎中文(台灣)‎

Workbench Image.svg

Introduction

Środowisko pracy Image zarządza różnymi typami plików graficznych bitmap i umożliwia ich otwarcie w programie FreeCAD.

Currently, the module supports opening BMP, JPG, PNG, and XPM file formats.

Tools

  • Image-import.svg Open: open an image on a new viewport.
  • Image-import-to-plane.svg Import to plane: import an image to a plane in the 3D view.
  • Image-scale.svg Scaling: scale an image imported to a plane.

Features

  • Like a Sketch, an imported image can be attached to one of the main planes XY, XZ, or YZ, and given a positive or negative offset.
  • The image is imported with relation of 1 pixel to 1 millimeter.
  • The recommendation is to have the imported image at a reasonable resolution.

Workflow

A major use of this workbench is tracing over the image, with the Draft or Sketcher tools, in order to generate a solid body based on the contours of the image.

Tracing over an image works best if the image has a small negative offset, for example, -0.1 mm, from the working plane. This means that the image will be slightly behind the plane where you draw your 2D geometry, so you won't draw on the image itself.

The offset of the image can be set during import, or changed later through its properties.